Menu
EUR

Massey Ferguson 6614 tractor parts & technical data

Looking for a trailer coupling, electrics or lighting for the Massey Ferguson 6614? You will find more than 250 parts here that fit this 6600 series model.

294 parts found for Massey Ferguson 6614
Show:
GRANIT Hydraulische Hubstrebe clevis / ball joint, 640 mm, Ø 92 mm
GRANIT
L (mm): 640 | C (mm): 40 | To fit: Massey Ferguson, Challenger | D (mm): 92 | Type: Gabelgelenk / Kugelgelenk | A (mm): 22 | S (mm): 45 More
L (mm): 640 | C (mm): 40 | To fit: Massey Ferguson, Challenger | D (mm...
€654,31 €540,75 €621,55 €513,68
You save 5%
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN): 97,1 | Lock: ball 80 | Load capacity (kg): 3000 | Description: Daiml... More
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-...
€3.271,95 €2.704,09
DANA Spicer Wheel hub final drive front axle 730
€408,25 €337,40
DANA Spicer Axial bearing washer central housing front axle 745, 142 g
€61,09 €50,49 €58,00 €47,93
You save 5%
Universal joint 30,18 x 106,3 mm, maintenance-free
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: ...
€224,08 €185,19 €212,85 €175,91
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
Tool box
€175,28 €144,86 €166,50 €137,60
You save 5%
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.414,07 €1.168,65 €1.082,75 €894,83
You save 23%
ROCKINGER Drawbar K80 rail width 311 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.406,44 €1.162,35 €1.076,90 €890,00
You save 23%
HELLA Interior light K (10W), clear, 12 / 24 V, built-in
HELLA
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nominal voltage: 12 / 24 V. Switches: Yes. Test mark: E1 8728, ECE. Type: Bulb. Ligh... More
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nomi...
€15,25 €12,60
Oil pressure switch oil filter steering 12 / 24 V, with seal ring
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 210021. More
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 2100...
€222,19 €183,63 €211,00 €174,38
You save 5%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
CARLISLE Master brake cylinder Fendt Ideal 7, Massey Ferguson 6614 - 7718
€831,00 €686,78 €789,45 €652,44
You save 5%
GRANIT Ball joint, complete right and left 420 mm, taper 23,5 - 26,5 mm
GRANIT
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€136,27 €112,62 €129,45 €106,98
You save 5%
Force sensor pin 60 kN Massey Ferguson
€395,80 €327,11 €376,00 €310,74
You save 5%
GRANIT Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
GRANIT
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€38,15 €31,53
Pivot
€560,71 €463,40 €532,65 €440,21
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
GRANIT Hydraulische Hubstrebe clevis / clevis, 680 mm, Ø 90 mm
GRANIT
C (mm): 45 | S (mm): 51 | S1 (mm): 39 | Type: Gabelgelenk / Gabelgelenk | L (mm): 680 | D (mm): 90 | To fit: Massey Ferguson, Challenger | A (mm): 25 More
C (mm): 45 | S (mm): 51 | S1 (mm): 39 | Type: Gabelgelenk / Gabelgelen...
€685,47 €566,50 €651,15 €538,14
You save 5%
Hydraulische Hubstrebe clevis / ball joint, 620 mm, Ø 92 mm
D (mm): 92 | Type: Gabelgelenk / Kugelgelenk | A (mm): 22 | L (mm): 620 | C (mm): 40 | To fit: Massey Ferguson, Challenger More
D (mm): 92 | Type: Gabelgelenk / Kugelgelenk | A (mm): 22 | L (mm): 62...
€654,31 €540,75 €621,55 €513,68
You save 5%
Eaton Thrust washer transmission Massey Ferguson, Challenger
Eaton
Reference no.: 518414M1 More
Reference no.: 518414M1
€32,90 €27,19
HELLA Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, clockwise
€371,08 €306,68 €298,35 €246,57
You save 20%
Showing 25 - 48 of 294

Massey Ferguson 6614 parts for hitching and towing

A 6614 is often hooked up to a heavy trailer, a force-steered dolly or an implement on the three-point linkage. This page lists more than 250 replacement parts for the model, and a good share of them deal with hitching: drawbars, drawbar frames, adapter plates, ball hitches, forced steering and hydraulic top links. Makers include GRANIT, Scharmüller, Walterscheid, DANA Spicer and ROCKINGER.

Drawbar frame, adapter plate and ball hitch

With a rail system on the rear of the tractor, the drawbar, ball hitch or a Piton hook slides into the rail of the drawbar frame. An adapter plate lets a different coupling fit the same bolt pattern. A tip for the ball hitch: keep the ball lightly greased and check the socket on the drawbar eye for wear. A dry ball soon wears oval, and the trailer starts to knock when you brake and pull away. On the forced steering, check the locking mechanism as well. Play there shows up as a trailer that wanders behind the tractor.

Top link, four-wheel drive clutch and sensors

A hydraulic top link lets you set the pitch of an implement without leaving the seat. When fitting it, make sure the hoses have enough slack with the linkage fully raised and fully lowered, or they will rub through on the frame. For the front axle drive there are external and internal plates for the four-wheel drive clutch, together with adjusting plates and O-rings used when setting it up. Keep the old adjusting plates when you strip it down and write down their thickness. That gives you a starting point for the new adjustment.

There are also temperature sensors, other sensors for the electronics, work lamps, control knobs for the cab and seals, for instance for the door handle.

Finding the right part for your 6614

The type plate tells you exactly which model you have, and the numbers within the 6600 series sit close together. For hitch parts, also measure the rail width and the locking pin on the tractor itself. For plates, sensors and seals, compare the reference number on the old part with the number shown with the product on this page.

The other models in the 6600 series each have their own page:

That way everything that fits one tractor stays together. Own another Massey Ferguson as well? Browse Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart