Menu
EUR

Massey Ferguson 6616 tractor parts & technical data

Looking for Massey Ferguson 6616 parts? This page brings together more than 250 items, including trailer couplings, electrics and lighting for the 6600 series.

287 parts found for Massey Ferguson 6616
Show:
Eaton Fitting transmission 654 g
Eaton
Reference no.: 184770M3 More
Reference no.: 184770M3
€52,25 €43,18
FEBI Electric cooling fan Massey Ferguson Tier 3 6485 - 7497
FEBI
To fit as: Massey Ferguson Tier 3 6485, 6490, 6495, 6497, 6499, 7485, 7490, 7495, 7497 More
To fit as: Massey Ferguson Tier 3 6485, 6490, 6495, 6497, 6499, 7485, ...
€1.197,19 €989,41 €717,43 €592,92
You save 40%
Shaft sealing ring 95 x 110 x 10 mm Fendt, Massey Ferguson
Version: 95 x 110 x 10 mm. More
Version: 95 x 110 x 10 mm.
€38,65 €31,94
Intermediate disc hand brake 5 mm thick Massey Ferguson 6460-6499
GRANIT Piston ring front wheel drive Massey Ferguson 3050-5612
€44,07 €36,42 €41,85 €34,59
You save 5%
GRANIT Starter ring gear Ø 423/393 mm, 132 teeth Massey Ferguson
GRANIT
Version: Ø 423/393 mm, 132 teeth. More
Version: Ø 423/393 mm, 132 teeth.
€115,28 €95,27 €109,50 €90,50
You save 5%
Bush for Vario drive assembly Fendt, Massey Ferguson
€57,62 €47,62 €54,70 €45,21
You save 5%
Nord-Lock detent edged washers 17 x 25,4 x 3,4 mm, DIN 88132 - 10 pieces
Description: With NORD - LOCK the bolt locks itself., The key to ensuring the best locking action lies in the different angles. The expansion of the N... More
Description: With NORD - LOCK the bolt locks itself., The key to ensur...
€37,50 €30,99
Scharmüller Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 295 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 295 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.395,13 €1.153,00 €1.233,85 €1.019,71
You save 12%
Scharmüller Drawbar K80 rail 293 mm, pin Ø 22 mm, 2000 kg, black
Scharmüller
Rail width: 293 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 293 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.408,44 €1.164,00 €1.245,60 €1.029,42
You save 12%
V-belt tensioner Ø 60 mm, height 25,55 mm Massey Ferguson
€184,88 €152,79 €175,60 €145,12
You save 5%
Borg Warner Fan clutch Massey Ferguson Tier 3 6480-6499, 7480-7497
€619,97 €512,37 €544,20 €449,75
You save 12%
AdBlue supply unit Fendt, Massey Ferguson, SAME, Lamborghini
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.457,72 €1.204,73 €1.384,80 €1.144,46
You save 5%
Filler cap for expansion tank
Version: For expansion tank. More
Version: For expansion tank.
€49,42 €40,84 €46,90 €38,76
You save 5%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€37,90 €31,32 €36,00 €29,75
You save 5%
Showing 169 - 192 of 287

Massey Ferguson 6616 parts for the driveline, hitch and cab

When the four wheel drive clutch on a 6616 starts to slip, or the dash flags a fault on a speed sensor, the parts you need sit deep inside the tractor. More than 250 replacement parts fit this Massey Ferguson, from clutch plates to work lamps, with makers such as GRANIT, Scharmüller, Walterscheid, HELLA and DANA Spicer.

Inside the driveline

For the 4WD clutch there are external and internal plates. Alongside them you will find inductive sensors, such as the one for transmission speed, and temperature sensors. Then there are O-rings, including ones for the PTO, sealing rings, adjusting plates and seals, right down to the seal on the cab door handle.

If you are rebuilding a plate pack, soak the new friction plates in the same oil the transmission runs on before you assemble them. Plates fitted dry tend to judder or glaze in the first hours. Look at the steel plates too. Blue heat marks or warping tell you how hot the pack has been running and whether the steels should be renewed at the same time.

A fault code from an inductive sensor does not always mean the sensor has failed. Metal fines on the tip are enough to upset the signal. Wipe it clean and check the plug for green corrosion before ordering a new one. If the fault stays, replacement is the next step.

Hitching and hydraulics at the rear

At the back there are ball drawbars, drawbar frames and adapter plates. If you pull a trailer with forced steering, inner parts and other components for that system are on this page as well. A hydraulic top link from Walterscheid lets you adjust heavy implements without climbing down from the seat.

For the cab there are work lamps from HELLA and GRANIT, welcome once autumn shortens the days, plus control knobs.

Choosing the right part for a 6616

The rating plate confirms you are working on a 6616. Stick to that model, because each tractor in the 6600 series has a page of its own. With plates, sensors and sealing rings, the safest route is the number on the old component. Compare it with the parts on this page before ordering, and with clutch plates check whether the teeth sit on the inside or the outside.

Running more than one tractor from this series? Each has its own page:

Older or other Massey Ferguson tractors are covered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart