Menu
EUR

Massey Ferguson 6718S tractor parts & technical data

A worn trailer coupling or a failing light on the Massey Ferguson 6718S? This 6700S series page holds more than 120 parts, electrics among them.

120 parts found for Massey Ferguson 6718S
Show:
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
You save 18%
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 class 4 | Width (mm): 160 | Theoretical luminous flux (lm): 5320 | Housing materia... More
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 cl...
€76,82 €63,49 €72,95 €60,29
You save 5%
GRANIT Radiator 470 x 459 mm Massey Ferguson 6613-7726/S
GRANIT
To fit as: Massey Ferguson Series 6600: 6613 Dyna 4, 6613 Dyna 6, 6614 Dyna 6, 6614 Dyna VT, 6615 Dyna 4, 6615 Dyna 6, 6615 Dyna VT, 6616 Dyna 6, 6616... More
To fit as: Massey Ferguson Series 6600: 6613 Dyna 4, 6613 Dyna 6, 6614...
€1.129,20 €933,22
GRANIT NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€837,84 €692,43 €795,90 €657,77
You save 5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Handle for side window, left Massey Ferguson Series 5S-8400
€58,56 €48,40 €55,60 €45,95
You save 5%
Pivot left Massey Ferguson, Challenger
€612,81 €506,45 €554,40 €458,18
You save 10%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Drawbar K80 rail 330 mm, pin Ø 20 mm, 3000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load cap...
€1.235,51 €1.021,08 €1.092,65 €903,02
You save 12%
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 180 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.076,56 €889,72 €952,10 €786,86
You save 12%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
HELLA Headlight left / right 12 V, H7, built-in, glass Ø 90 mm Fendt
HELLA
Bulb: 12V55W / H7. Dimensions: 108 x 181.7 mm. Connection: AMP. Form: Round. Height: 108 mm. Material: Diffusing lens: glass. Depth: 181,7 mm. Install... More
Bulb: 12V55W / H7. Dimensions: 108 x 181.7 mm. Connection: AMP. Form: ...
€152,01 €125,63
HELLA Work lamp Oval 100 flood beam H3, 12/24 V, 160 x 100 x 78 mm
HELLA
Light aperture (mm): 130 x 75 | Mounting type: Vertical | Material: Housing: plastic, lens: glass | Nominal voltage (V): 12 / 24 | Bulbs included: No ... More
Light aperture (mm): 130 x 75 | Mounting type: Vertical | Material: Ho...
€58,20 €48,10
Temperature sensor exhaust aftertreatment
€223,56 €184,76 €212,35 €175,50
You save 5%
Hydraulische Hubstrebe clevis / ball joint, 810 mm, Ø 102 mm
L (mm): 810 | S (mm): 44 | S1 (mm): 37,5 | C (mm): 45 | To fit: Massey Ferguson, Challenger | Type: Gabelgelenk / Kugelgelenk | D (mm): 102 | A (mm): ... More
L (mm): 810 | S (mm): 44 | S1 (mm): 37,5 | C (mm): 45 | To fit: Massey...
€701,05 €579,38 €665,95 €550,37
You save 5%
GRANIT Hydraulic lifting strut 810 - 960 mm, clevis / ball joint
GRANIT
To fit: Massey Ferguson | C (mm): 45 | L (mm): 810 → 960 | B (mm): 28 | Type: Clevis joint/ball joint | D (mm): 102 | A (mm): 29 x 60 | S1 (mm): 38 More
To fit: Massey Ferguson | C (mm): 45 | L (mm): 810 → 960 | B (mm): 2...
€722,64 €597,22 €686,50 €567,36
You save 5%
SACHS Damper cab mounting MSE30/15X70A2, rear, gas pressure Massey Ferguson
SACHS
Dimensions (mm): MSE30/15X70A2 | Type: Stroke-dependent damping | Installation location: Rear, both sides | Design: Gas pressure | To fit: Massey Ferg... More
Dimensions (mm): MSE30/15X70A2 | Type: Stroke-dependent damping | Inst...
€388,77 €321,30 €369,30 €305,21
You save 5%
GRANIT Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, 175 ccm oil
GRANIT
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Reference no.: QP7H15-8244 | Oil quantity (ccm): 175 | Fixing: DM | No. of grooves: 6 | Refrigerant: ... More
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Reference no.: QP7H15...
€460,82 €380,84 €437,75 €361,78
You save 5%
Pilot bearing 20 x 42 x 12 mm
Dimensions (mm): 20 x 42 x 12 More
Dimensions (mm): 20 x 42 x 12
€7,30 €6,03
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 244 mm, Ø 89 mm
€468,19 €386,93 €292,60 €241,82
You save 38%
Rep set drive set Fendt, Massey Ferguson
€445,29 €368,01 €423,00 €349,59
You save 5%
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pat...
€531,07 €438,90 €469,65 €388,14
You save 12%
Showing 25 - 48 of 120

Massey Ferguson 6718S parts for the hitch, cooling system and cab

The back end of a 6718S does the heavy lifting. Tippers, bale trailers and big implements hang off the hitch and the three-point linkage day after day, so that is where wear tends to show first. This page brings together more than 120 replacement parts that fit the Massey Ferguson 6718S, all new parts from Walterscheid, Scharmüller, HELLA, MAHLE and GRANIT.

Hitching, towing and steered axles

On the towing side there are drawbars with ball or pin, complete drawbar frames, adapter plates, ball hitches and a top drawbar. If you pull a trailer with a steered axle, you will also find forced steering parts such as the inner section of the steering rod for the left or right side. A hydraulic top link lets you adjust the pitch of a mounted implement from the seat, and connector heads for the supply and brake lines keep the trailer air brakes working.

Away from the hitch, the list also covers swivelling pivot points for the fender brackets, LED work lights, tank caps and ball joints for the steering.

Thermostat, temperature sensor and aircon

The cooling circuit has a thermostat and a temperature sensor, both sold separately. If the gauge reads higher than usual, or the engine struggles to warm up on a cold morning, those two parts are the first place to look. For the cab there are aircon compressors. When fitting a new compressor, have the system flushed and the receiver drier replaced, otherwise debris from the failed unit ends up in the new one.

Matching the right part

The data plate confirms the tractor is a 6718S and not another model in the 6700S series. From there, let the component you took off do the talking. Drawbars, top links and thermostats often carry a stamped or printed reference number that you can check against the new item. With a drawbar, also check ball or pin and the rail width of the frame already fitted.

A tip for the hydraulic top link: retract the rod before parking up. Dirt and surface rust on an extended rod slowly chew up the seal, and before long the cylinder starts to weep.

Sister models

Running more than one tractor from this series? The Massey Ferguson 6715S and the Massey Ferguson 6713S each have their own page with the parts for that model. For every series of the brand, head to Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart