Menu
EUR

Massey Ferguson 6718S tractor parts & technical data

A worn trailer coupling or a failing light on the Massey Ferguson 6718S? This 6700S series page holds more than 120 parts, electrics among them.

120 parts found for Massey Ferguson 6718S
Show:
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
5%
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 class 4 | Wi...
€76,82 €63,49 €72,95 €60,29
 
GRANIT Radiator 470 x 459 mm Massey Ferguson 6613-7726/S
GRANIT
Radiator 470 x 459 mm Massey Ferguson 6613-7726/S
To fit as: Massey Ferguson Series 6600: 6613 Dyna 4, 6613 Dyna 6, 6614 Dyna 6, 6...
€1.129,20 €933,22
 
GRANIT NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
5%
GRANIT
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€837,84 €692,43 €795,90 €657,77
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
 
Handle for side window, left Massey Ferguson Series 5S-8400
5%
Handle for side window, left Massey Ferguson Series 5S-8400
€58,56 €48,40 €55,60 €45,95
 
Pivot left Massey Ferguson, Challenger
10%
Pivot left Massey Ferguson, Challenger
€612,81 €506,45 €554,40 €458,18
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
Scharmüller Drawbar K80 rail 330 mm, pin Ø 20 mm, 3000 kg, black
12%
Scharmüller
Drawbar K80 rail 330 mm, pin Ø 20 mm, 3000 kg, black
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load capacity: 3000...
€1.235,51 €1.021,08 €1.092,65 €903,02
 
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
12%
Scharmüller
Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€1.076,56 €889,72 €952,10 €786,86
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
HELLA Headlight left / right 12 V, H7, built-in, glass Ø 90 mm Fendt
HELLA
Headlight left / right 12 V, H7, built-in, glass Ø 90 mm Fendt
Bulb: 12V55W / H7. Dimensions: 108 x 181.7 mm. Connection: AMP. Form: Round. Hei...
€152,01 €125,63
 
HELLA Work lamp Oval 100 flood beam H3, 12/24 V, 160 x 100 x 78 mm
HELLA
Work lamp Oval 100 flood beam H3, 12/24 V, 160 x 100 x 78 mm
Light aperture (mm): 130 x 75 | Mounting type: Vertical | Material: Housing: pla...
€58,20 €48,10
 
Temperature sensor exhaust aftertreatment
5%
Temperature sensor exhaust aftertreatment
€223,56 €184,76 €212,35 €175,50
 
Hydraulische Hubstrebe clevis / ball joint, 810 mm, Ø 102 mm
5%
Hydraulische Hubstrebe clevis / ball joint, 810 mm, Ø 102 mm
L (mm): 810 | S (mm): 44 | S1 (mm): 37,5 | C (mm): 45 | To fit: Massey Ferguson,...
€701,05 €579,38 €665,95 €550,37
 
GRANIT Hydraulic lifting strut 810 - 960 mm, clevis / ball joint
5%
GRANIT
Hydraulic lifting strut 810 - 960 mm, clevis / ball joint
To fit: Massey Ferguson | C (mm): 45 | L (mm): 810 → 960 | B (mm): 28 | Type: Cl...
€722,64 €597,22 €686,50 €567,36
 
SACHS Damper cab mounting MSE30/15X70A2, rear, gas pressure Massey Ferguson
5%
SACHS
Damper cab mounting MSE30/15X70A2, rear, gas pressure Massey Ferguson
Dimensions (mm): MSE30/15X70A2 | Type: Stroke-dependent damping | Installation l...
€388,77 €321,30 €369,30 €305,21
 
GRANIT Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, 175 ccm oil
5%
GRANIT
Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, 175 ccm oil
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Reference no.: QP7H15-8244 | Oi...
€460,82 €380,84 €437,75 €361,78
 
Pilot bearing 20 x 42 x 12 mm
Pilot bearing 20 x 42 x 12 mm
Dimensions (mm): 20 x 42 x 12
€7,30 €6,03
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 244 mm, Ø 89 mm
38%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 244 mm, Ø 89 mm
€468,19 €386,93 €292,60 €241,82
 
Rep set drive set Fendt, Massey Ferguson
5%
Rep set drive set Fendt, Massey Ferguson
€445,29 €368,01 €423,00 €349,59
 
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
12%
Scharmüller
Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 ...
€531,07 €438,90 €469,65 €388,14
 
Showing 25 - 48 of 120

Massey Ferguson 6718S parts for the hitch, cooling system and cab

The back end of a 6718S does the heavy lifting. Tippers, bale trailers and big implements hang off the hitch and the three-point linkage day after day, so that is where wear tends to show first. This page brings together more than 120 replacement parts that fit the Massey Ferguson 6718S, all new parts from Walterscheid, Scharmüller, HELLA, MAHLE and GRANIT.

Hitching, towing and steered axles

On the towing side there are drawbars with ball or pin, complete drawbar frames, adapter plates, ball hitches and a top drawbar. If you pull a trailer with a steered axle, you will also find forced steering parts such as the inner section of the steering rod for the left or right side. A hydraulic top link lets you adjust the pitch of a mounted implement from the seat, and connector heads for the supply and brake lines keep the trailer air brakes working.

Away from the hitch, the list also covers swivelling pivot points for the fender brackets, LED work lights, tank caps and ball joints for the steering.

Thermostat, temperature sensor and aircon

The cooling circuit has a thermostat and a temperature sensor, both sold separately. If the gauge reads higher than usual, or the engine struggles to warm up on a cold morning, those two parts are the first place to look. For the cab there are aircon compressors. When fitting a new compressor, have the system flushed and the receiver drier replaced, otherwise debris from the failed unit ends up in the new one.

Matching the right part

The data plate confirms the tractor is a 6718S and not another model in the 6700S series. From there, let the component you took off do the talking. Drawbars, top links and thermostats often carry a stamped or printed reference number that you can check against the new item. With a drawbar, also check ball or pin and the rail width of the frame already fitted.

A tip for the hydraulic top link: retract the rod before parking up. Dirt and surface rust on an extended rod slowly chew up the seal, and before long the cylinder starts to weep.

Sister models

Running more than one tractor from this series? The Massey Ferguson 6715S and the Massey Ferguson 6713S each have their own page with the parts for that model. For every series of the brand, head to Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart