Menu
EUR

Massey Ferguson 7475 tractor parts & technical data

The Massey Ferguson 7475 belongs to the 7400 series, and this page offers more than 350 parts for it, including electrics, lighting and engine components.

394 parts found for Massey Ferguson 7475
Show:
Sealing ring fuel line Ø 8 x 4,6 mm, tube-Ø 3/16 inch
Sealing ring fuel line Ø 8 x 4,6 mm, tube-Ø 3/16 inch
Dimensions: Height 6, Outer Ø 8, Inner Ø 4.6, For pipe Ø 3/16" mm.
€1,00 €0,83
 
GRANIT LED headlight dipped beam / main beam 12 / 24 V, 144,4 x 144,4 x 88 mm
5%
GRANIT
LED headlight dipped beam / main beam 12 / 24 V, 144,4 x 144,4 x 88 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€99,62 €82,33 €94,60 €78,18
 
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€27,80 €22,98
 
LED work lights spotlight 23 W, 3071 lm, 183 x 101 x 67 mm, 12 / 24 V
5%
LED work lights spotlight 23 W, 3071 lm, 183 x 101 x 67 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€61,09 €50,49 €58,00 €47,93
 
Bush wheel hub 40 x 44 x 35 mm
Bush wheel hub 40 x 44 x 35 mm
€10,55 €8,72
 
ROCKINGER Drawbar without sensor rail 311 mm, coupling pin 38 mm, black
20%
ROCKINGER
Drawbar without sensor rail 311 mm, coupling pin 38 mm, black
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.095,66 €905,50 €880,91 €728,02
 
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
16%
Scharmüller
Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.390,39 €1.149,08 €1.171,10 €967,85
 
Bosch/Rexroth Hydraulic pump 45 cm³, as 1" 15Z 16/32 DP, right
5%
Bosch/Rexroth
Hydraulic pump 45 cm³, as 1" 15Z 16/32 DP, right
Direction of rotation: Right | Output volume (cc/rev): 45 | Drive shaft: Splined...
€3.533,20 €2.920,00 €3.356,50 €2.773,97
 
ROCKINGER Forced steering welded both ends, lock K50
23%
ROCKINGER
Forced steering welded both ends, lock K50
Lock: K50. Assembly notes: Both ends. To fit: Rockinger ball insert RO825X.
€1.414,07 €1.168,65 €1.082,75 €894,83
 
MAHLE Alternator 14 V / 150 A, flange 56 mm, form B, compact, dust-tight
38%
MAHLE
Alternator 14 V / 150 A, flange 56 mm, form B, compact, dust-tight
Mounting hole Ø / R (mm): 10,2 / 90,0 | Nominal values (V / A): 14 / 150 | Belt ...
€537,81 €444,47 €336,10 €277,77
 
GRANIT LED work lights spotlight 30 W, 2900 lm, 166 x 65 x 106 mm
10%
GRANIT
LED work lights spotlight 30 W, 2900 lm, 166 x 65 x 106 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€71,57 €59,15 €64,75 €53,51
 
GRANIT King pin bore 15 mm, outer-Ø 28 mm, hole spacing 66 mm Carraro front axle
5%
GRANIT
King pin bore 15 mm, outer-Ø 28 mm, hole spacing 66 mm Carraro front axle
€38,27 €31,63 €36,35 €30,04
 
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
5%
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
€74,31 €61,41 €70,55 €58,31
 
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Scharmüller
Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M2...
€1.855,80 €1.533,72
 
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
 
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
HELLA Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
HELLA
Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing: 160 mm. ...
€80,85 €66,82
 
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
5%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€35,37 €29,23 €33,60 €27,77
 
GRANIT Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
GRANIT
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C.
€38,30 €31,65
 
Walterscheid Piton Fix rail width 311 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 311 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.843,50 €1.523,55 €1.448,45 €1.197,07
 
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
10%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€90,28 €74,61 €81,65 €67,48
 
GRANIT Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
GRANIT
Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
Version: 12 V / 50 A, With bracket, 4-pin, blade terminal 6.3 mm.
€31,60 €26,12
 
Showing 1 - 24 of 394

Massey Ferguson 7475 parts for the cab, electrics and turbo

The rear window of a 7475 is opened and shut many times a day when hitching, and the gas struts and catch feel it. For this tractor from the 7400 series there are more than 350 new replacement parts on this page, from GRANIT, HELLA, Scharmüller, MAHLE and DANA Spicer.

Rear window and cab fittings

Listed here are rear window gas struts, sealing rings for the rear window lock, handles and mirrors. Fit a gas strut with the rod pointing down so the internal seal stays lubricated and lasts longer. Replace struts in pairs so the window is not loaded on one side.

Charging and switches

An alternator keeps the battery charged, and relays with holders handle the circuits. On the dashboard there are rocker switches, such as the one for four-wheel drive, and push button switches. HELLA work lamps light up the area around the tractor. If a function cuts in and out, look at the relay and its holder first, since a loose blade terminal causes exactly that.

Engine and turbocharger

Engine parts include V-belts, thermostats, O-rings and gaskets, among them the one for the turbocharger oil feed line. Renew those gaskets every time the oil line is undone. When reconnecting, add a little clean oil to the turbo and let the engine idle gently first so the bearings are lubricated before you put load on it. Seals for the tank sensor are listed as well.

If the battery is not charging well, check the V-belt tension and the cable lugs before replacing the alternator. A belt that squeals on a cold start also slips under load. Do not overtighten it either, because that wears out the alternator and water pump bearings.

Towing

A replacement drawbar is available for hitching trailers.

Type plate and the rest of the 7400 series

Check the type plate to confirm it is a 7475. A reference number on the old part, for instance on the alternator or a relay, can be compared with the number shown with the product. Do not measure a used V-belt, as it will have stretched. Read the number printed on its side instead.

The other tractors in the 7400 series have their own page:

Every model of the brand is listed under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart