Menu
EUR

Massey Ferguson 7615 tractor parts & technical data

More than 300 parts for the Massey Ferguson 7615 from the 7600 series, sorted by group, so you can go straight to trailer couplings, electrics or lighting.

331 parts found for Massey Ferguson 7615
Show:
V-belt tensioner Ø 60 mm, height 25,55 mm Massey Ferguson
€184,88 €152,79 €175,60 €145,12
You save 5%
Borg Warner Fan clutch Massey Ferguson Tier 3 6480-6499, 7480-7497
€619,97 €512,37 €544,20 €449,75
You save 12%
AdBlue supply unit Fendt, Massey Ferguson, SAME, Lamborghini
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.457,72 €1.204,73 €1.384,80 €1.144,46
You save 5%
Filler cap for expansion tank
Version: For expansion tank. More
Version: For expansion tank.
€49,42 €40,84 €46,90 €38,76
You save 5%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€37,90 €31,32 €36,00 €29,75
You save 5%
Radiator hose, top/bottom, radiator Ø 45 mm Massey Ferguson
€29,60 €24,46
GRANIT Nut Massey Ferguson Series 300-8400
GRANIT Threaded spindle adjuster Massey Ferguson 3050-3125, 6110-6290
€85,43 €70,60 €81,15 €67,07
You save 5%
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Ri...
€16,10 €13,31
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€46,86 €38,73 €44,50 €36,78
You save 5%
GRANIT Handle Fendt, Massey Ferguson
€36,65 €30,29
Lock tool box Massey Ferguson series 5600-8700/S
€91,73 €75,81 €82,95 €68,55
You save 10%
Pivot fender left Massey Ferguson 5460-8732
€440,08 €363,70 €418,00 €345,45
You save 5%
Walterscheid Drawbar frame System 80 335/22/30, 2000/3000 kg, 75,0/85,6/88,2 kN
Walterscheid
D-value: 75,0 ; 85,6 ; 88,2 kN. Detent pin Ø: 22 mm. Guide width: 30 mm. Rail width: 335 mm. Load capacity: 2000 / 3000 kg. Detent: 6. EC certificati... More
D-value: 75,0 ; 85,6 ; 88,2 kN. Detent pin Ø: 22 mm. Guide width: 30 ...
€4.954,95 €4.095,00 €4.087,80 €3.378,35
You save 18%
Scharmüller Drawbar K80 rail 320 mm, pin Ø 30 mm, 3000 kg, black
Scharmüller
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 190 mm. Colour: Black. Overhang:... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Load cap...
€1.392,54 €1.150,86 €1.172,90 €969,34
You save 16%
Showing 217 - 240 of 331

Massey Ferguson 7615 parts for forced steering, cooling and drive

The 7615 is often seen pulling steered trailers and carrying heavy implements on the linkage. This page carries more than 300 Massey Ferguson 7615 parts: drawbars, drawbar frames, automatic hitches and hydraulic lifting struts at the rear, thermostats and sensors for the engine, and clutch plates and adjusting plates for the driveline. Brands are GRANIT, Scharmüller, Walterscheid, DANA Spicer and ROCKINGER.

Forced steering and hitching

For steered trailers there are forced steering parts such as a bar welded at both ends with a lock. You will also find rail drawbars, drawbar frames including versions for Challenger, automatic hitches and adapter plates. Every time you hitch up, check the balls and the lock on the forced steering bar. A bar that does not lock properly can let the trailer kick out in a bend. Hydraulic lifting struts are available for the three point linkage.

Engine and cooling

Under the bonnet there are thermostats and inductive transmission speed sensors, and work lamps for the cab. Always fit a thermostat with a new gasket and use the right type of coolant. If in doubt, drain fully rather than topping up with something different.

Driveline and front axle

The wet clutches, including the four wheel drive clutch, use external plates and internal plates. In the DANA Spicer front axle, adjusting plates set up the gear mesh. There are also O-rings, sealing rings and seals such as the cab door handle seal.

Hydraulic lifting struts and the PTO

A hydraulic lifting strut lets you level an implement from the seat, provided the strut holds its oil. If an implement slowly drops out of level with the engine off, the strut is often leaking internally. Check the hoses and quick couplers for dirt and leaks before replacing the strut itself, and when fitting it make sure the hoses neither stretch nor rub with the linkage fully raised or fully lowered. For the PTO there are O-rings. Renew them every time the PTO stub comes out, even if nothing was leaking, because a used ring seldom lasts long once it has been disturbed. The work lamps for the cab are worth a quick check too, as a flickering lamp is more often a corroded plug than a failed light.

Ordering the right part

The serial number on the type plate of your 7615 and the reference number on the old part give you the best certainty, and for drawbars and frames the measured rail width helps too. Every other model in the 7600 series has its own page: Massey Ferguson 7616, Massey Ferguson 7618, Massey Ferguson 7619, Massey Ferguson 7620 and Massey Ferguson 7624. All other tractors from the brand are under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart