Menu
EUR

Massey Ferguson 7615 tractor parts & technical data

More than 300 parts for the Massey Ferguson 7615 from the 7600 series, sorted by group, so you can go straight to trailer couplings, electrics or lighting.

331 parts found for Massey Ferguson 7615
Show:
GRANIT Expansion valve 3/8 - 5/8 inch o-ring
GRANIT
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€46,71 €38,60 €44,35 €36,65
You save 5%
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PV6 Massey Ferguson
SANDEN
Pulley Ø (mm): 119 | Nominal voltage (V): 12 | Reference no.: 8244 | For compressor: SD7H15 | No. of grooves: 6 | Fixing: DM | Connection: PV6 | Refr... More
Pulley Ø (mm): 119 | Nominal voltage (V): 12 | Reference no.: 8244 | ...
€627,09 €518,26 €595,70 €492,31
You save 5%
GRANIT Push button switch linkage lift 12/24 V, Ø 30 mm, green button
GRANIT
Version: 12/24 V Green button, external switch on mudguard, Ø 30 mm, 4 blade terminals 6.3 x 0.8 Dustproof and splashproof More
Version: 12/24 V Green button, external switch on mudguard, Ø 30 mm, ...
€34,46 €28,48 €32,70 €27,02
You save 5%
GRANIT Circlip as Ø 70 mm, thickness 2,5 mm, DIN 471 - 50 pieces
GRANIT
s (mm): 2.5 | Box contents: 50 | DIN: 471 | Ø d1 (inches): 2 3/4 | d1 (mm): 70 More
s (mm): 2.5 | Box contents: 50 | DIN: 471 | Ø d1 (inches): 2 3/4 | d1...
€3,47 €2,87
Eaton Fitting transmission 654 g
Eaton
Reference no.: 184770M3 More
Reference no.: 184770M3
€52,25 €43,18
FEBI Electric cooling fan Massey Ferguson Tier 3 6485 - 7497
FEBI
To fit as: Massey Ferguson Tier 3 6485, 6490, 6495, 6497, 6499, 7485, 7490, 7495, 7497 More
To fit as: Massey Ferguson Tier 3 6485, 6490, 6495, 6497, 6499, 7485, ...
€1.197,19 €989,41 €717,43 €592,92
You save 40%
GRANIT Planetary gear Powershift 28 teeth Massey Ferguson 5400-7600
GRANIT
Number of teeth: 28. More
Number of teeth: 28.
€138,87 €114,77 €131,90 €109,01
You save 5%
Shaft sealing ring 95 x 110 x 10 mm Fendt, Massey Ferguson
Version: 95 x 110 x 10 mm. More
Version: 95 x 110 x 10 mm.
€38,65 €31,94
Intermediate disc hand brake 5 mm thick Massey Ferguson 6460-6499
GRANIT Piston ring front wheel drive Massey Ferguson 3050-5612
€44,07 €36,42 €41,85 €34,59
You save 5%
GRANIT Starter ring gear Ø 423/393 mm, 132 teeth Massey Ferguson
GRANIT
Version: Ø 423/393 mm, 132 teeth. More
Version: Ø 423/393 mm, 132 teeth.
€115,28 €95,27 €109,50 €90,50
You save 5%
Bush for Vario drive assembly Fendt, Massey Ferguson
€57,62 €47,62 €54,70 €45,21
You save 5%
Nord-Lock detent edged washers 17 x 25,4 x 3,4 mm, DIN 88132 - 10 pieces
Description: With NORD - LOCK the bolt locks itself., The key to ensuring the best locking action lies in the different angles. The expansion of the N... More
Description: With NORD - LOCK the bolt locks itself., The key to ensur...
€37,50 €30,99
Scharmüller Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 311 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 175 mm. Thread: M20. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 311 mm. Hole pat...
€702,01 €580,17 €620,85 €513,10
You save 12%
Scharmüller Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 295 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 295 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.395,13 €1.153,00 €1.233,85 €1.019,71
You save 12%
Scharmüller Drawbar K80 rail 293 mm, pin Ø 22 mm, 2000 kg, black
Scharmüller
Rail width: 293 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 293 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.408,44 €1.164,00 €1.245,60 €1.029,42
You save 12%
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€177,02 €146,30 €156,56 €129,39
You save 12%
Showing 193 - 216 of 331

Massey Ferguson 7615 parts for forced steering, cooling and drive

The 7615 is often seen pulling steered trailers and carrying heavy implements on the linkage. This page carries more than 300 Massey Ferguson 7615 parts: drawbars, drawbar frames, automatic hitches and hydraulic lifting struts at the rear, thermostats and sensors for the engine, and clutch plates and adjusting plates for the driveline. Brands are GRANIT, Scharmüller, Walterscheid, DANA Spicer and ROCKINGER.

Forced steering and hitching

For steered trailers there are forced steering parts such as a bar welded at both ends with a lock. You will also find rail drawbars, drawbar frames including versions for Challenger, automatic hitches and adapter plates. Every time you hitch up, check the balls and the lock on the forced steering bar. A bar that does not lock properly can let the trailer kick out in a bend. Hydraulic lifting struts are available for the three point linkage.

Engine and cooling

Under the bonnet there are thermostats and inductive transmission speed sensors, and work lamps for the cab. Always fit a thermostat with a new gasket and use the right type of coolant. If in doubt, drain fully rather than topping up with something different.

Driveline and front axle

The wet clutches, including the four wheel drive clutch, use external plates and internal plates. In the DANA Spicer front axle, adjusting plates set up the gear mesh. There are also O-rings, sealing rings and seals such as the cab door handle seal.

Hydraulic lifting struts and the PTO

A hydraulic lifting strut lets you level an implement from the seat, provided the strut holds its oil. If an implement slowly drops out of level with the engine off, the strut is often leaking internally. Check the hoses and quick couplers for dirt and leaks before replacing the strut itself, and when fitting it make sure the hoses neither stretch nor rub with the linkage fully raised or fully lowered. For the PTO there are O-rings. Renew them every time the PTO stub comes out, even if nothing was leaking, because a used ring seldom lasts long once it has been disturbed. The work lamps for the cab are worth a quick check too, as a flickering lamp is more often a corroded plug than a failed light.

Ordering the right part

The serial number on the type plate of your 7615 and the reference number on the old part give you the best certainty, and for drawbars and frames the measured rail width helps too. Every other model in the 7600 series has its own page: Massey Ferguson 7616, Massey Ferguson 7618, Massey Ferguson 7619, Massey Ferguson 7620 and Massey Ferguson 7624. All other tractors from the brand are under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart