Menu
EUR

Massey Ferguson 8240 tractor parts & technical data

Time to replace a trailer coupling or a light on the Massey Ferguson 8240? More than 350 parts for this 8200 series tractor are listed here, electrics too.

343 parts found for Massey Ferguson 8240
Show:
Eaton Sonnenrad transmission Challenger, Massey Ferguson
Eaton
Reference no.: 1866552M1 More
Reference no.: 1866552M1
€50,15 €41,45
Cardan shaft bearing Massey Ferguson 6260-6290, 8210-8250
€78,70 €65,04 €74,75 €61,78
You save 5%
Bush 95 x 101 x 43 mm Massey Ferguson 3050-8240
€73,47 €60,72 €69,75 €57,64
You save 5%
GRANIT Steering cylinder Massey Ferguson Series 3000-8240
€1.432,64 €1.184,00 €1.361,00 €1.124,79
You save 5%
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm. More
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€14,60 €12,07
Sealing ring gear shift cover Ø 22,2 x 31,8 x 5 mm Massey Ferguson
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 22,2 mm. Height 1: 5 mm. More
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 22,2 mm. Height...
€17,55 €14,50
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Injection nozzle Case IH CS 110-150
Type formula: DLLA150S620. More
Type formula: DLLA150S620.
€87,36 €72,20 €82,95 €68,55
You save 5%
Handle for side window, left Massey Ferguson Series 5S-8400
€58,56 €48,40 €55,60 €45,95
You save 5%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Drawbar K80 rail 330 mm, pin Ø 20 mm, 3000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load cap...
€1.235,51 €1.021,08 €1.092,65 €903,02
You save 12%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.526,39 €1.261,48 €1.349,90 €1.115,62
You save 12%
Knob black switch, heating / air conditioning
Version: For switch, heater/air conditioning. More
Version: For switch, heater/air conditioning.
€19,10 €15,79
HELLA Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
HELLA
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Material: Plastic. Material thickness: 5 mm. Fixing: Vertical. Installation location: R... More
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Materia...
€2,86 €2,36
GRANIT Contact switch clutch mechanical, connection cable with plug
GRANIT
Version: Mechanical, connection cable with plug. More
Version: Mechanical, connection cable with plug.
€85,18 €70,40
Cobo Contact switch PTO shaft mechanical with blade terminal connection
Cobo
Version: Mechanical with blade terminal connection. More
Version: Mechanical with blade terminal connection.
€60,75 €50,21 €54,95 €45,41
You save 10%
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
You save 12%
Temperature sensor transmission oil temperature
Version: Transmission oil temperature. More
Version: Transmission oil temperature.
€35,96 €29,72 €34,15 €28,22
You save 5%
GRANIT Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
GRANIT
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270, 275, 283, 290, 298, 340, 342, 350, 352, 355, 360, 362, 365, 375, 383, 390, 393... More
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270...
€23,70 €19,59
Walterscheid Adapter plate rail width 322 mm, hole pattern 140 x 80 mm, M20
Walterscheid
Hole (mm): M20 | Detent pin Ø (mm): 22 | Hole pattern (mm): 140 x 80 | Rail width (mm): 322 | D-value (kN): 89,3 | Colour: Black | Load capacity (kg)... More
Hole (mm): M20 | Detent pin Ø (mm): 22 | Hole pattern (mm): 140 x 80 ...
€554,06 €457,90 €435,30 €359,75
You save 21%
Showing 73 - 96 of 343

Massey Ferguson 8240 parts for the PTO clutch, cab and hitch

A slipping PTO is one of the classic jobs on a Massey Ferguson 8240, which is why inner and outer plates for the PTO clutch sit on this page next to more than 350 other parts that fit this tractor. They come from GRANIT and from makers such as Scharmüller, Cobo, HELLA and GRAMMER, and cover the engine bay, the cab, lighting and the rear hitch.

What you can fit to an 8240

  • Driveline and engine: PTO clutch plates, starter motors, thermostats and O-rings, for example for the feed pump.
  • Sealing: seals and sealing rings, such as a seal for the tank sensor and a sealing ring for the rear window lock.
  • Cab: gas struts for the rear window, mirrors, tractor seats, contact switches and push buttons.
  • Lighting: work lamps from HELLA and others, including a square built-in spotlight.
  • Hitching: drawbars for the hitch rail and bushes for the split pin lock.

Rebuilding the PTO clutch properly

Once the clutch housing is open, replace the inner and outer plates as a full pack. Fitting a fresh friction plate against a worn, heat-blued steel plate means it runs hot again and the PTO starts slipping under heavy load. Lay every steel plate on a flat bench and check that it sits true. While you are in there, renew the O-rings and sealing rings in that area too, so a small weep does not send you back into the housing a month later.

If the engine does not crank when you turn the key, do not condemn the starter straight away. A worn contact switch gives exactly the same symptoms. With a multimeter, check whether voltage reaches the starter signal wire with the key in the start position. If nothing arrives, the fault lies in the switch or the wiring and the starter can stay where it is. The two gas struts on the rear window age at the same rate, so change them as a pair. A single new strut pushes the glass open unevenly and strains the hinges. When fitting a new HELLA work lamp, look at the plug as well and protect the pins with a little contact grease.

Matching the part to your tractor

The type plate on the tractor tells you exactly which 8240 you are working on. For a thermostat, starter or switch, your best clue is the number stamped on or stuck to the old part. Compare it with the product details on this page. For clutch plates, measure the thickness and the inner and outer size of the old plate with a caliper before ordering.

Other tractors in the 8200 series

If the 8240 shares the yard with another model from the same series, order through that tractor's own page so you only see the parts recorded for it:

Every other model page for the brand is gathered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart