Menu
EUR

Massey Ferguson 8240 tractor parts & technical data

Time to replace a trailer coupling or a light on the Massey Ferguson 8240? More than 350 parts for this 8200 series tractor are listed here, electrics too.

343 parts found for Massey Ferguson 8240
Show:
DANA Spicer Pressure plate pignonas final drive front axle 710
DANA Spicer
Pressure plate pignonas final drive front axle 710
€7,55 €6,24
 
Eaton Sonnenrad transmission Challenger, Massey Ferguson
Eaton
Sonnenrad transmission Challenger, Massey Ferguson
Reference no.: 1866552M1
€50,15 €41,45
 
Cardan shaft bearing Massey Ferguson 6260-6290, 8210-8250
5%
Cardan shaft bearing Massey Ferguson 6260-6290, 8210-8250
€78,70 €65,04 €74,75 €61,78
 
Bush 95 x 101 x 43 mm Massey Ferguson 3050-8240
5%
Bush 95 x 101 x 43 mm Massey Ferguson 3050-8240
€73,47 €60,72 €69,75 €57,64
 
GRANIT Steering cylinder Massey Ferguson Series 3000-8240
5%
GRANIT
Steering cylinder Massey Ferguson Series 3000-8240
€1.432,64 €1.184,00 €1.361,00 €1.124,79
 
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€14,60 €12,07
 
Sealing ring gear shift cover Ø 22,2 x 31,8 x 5 mm Massey Ferguson
Sealing ring gear shift cover Ø 22,2 x 31,8 x 5 mm Massey Ferguson
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 22,2 mm. Height 1: 5 mm.
€17,55 €14,50
 
Seal for return lubrication line
Seal for return lubrication line
€10,45 €8,64
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
 
Injection nozzle Case IH CS 110-150
5%
Injection nozzle Case IH CS 110-150
Type formula: DLLA150S620.
€87,36 €72,20 €82,95 €68,55
 
Handle for side window, left Massey Ferguson Series 5S-8400
5%
Handle for side window, left Massey Ferguson Series 5S-8400
€58,56 €48,40 €55,60 €45,95
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
Scharmüller Drawbar K80 rail 330 mm, pin Ø 20 mm, 3000 kg, black
12%
Scharmüller
Drawbar K80 rail 330 mm, pin Ø 20 mm, 3000 kg, black
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load capacity: 3000...
€1.235,51 €1.021,08 €1.092,65 €903,02
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
12%
Scharmüller
Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Versi...
€1.526,39 €1.261,48 €1.349,90 €1.115,62
 
Knob black switch, heating / air conditioning
Knob black switch, heating / air conditioning
Version: For switch, heater/air conditioning.
€19,10 €15,79
 
HELLA Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
HELLA
Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Material: Plastic...
€2,86 €2,36
 
GRANIT Contact switch clutch mechanical, connection cable with plug
GRANIT
Contact switch clutch mechanical, connection cable with plug
Version: Mechanical, connection cable with plug.
€85,18 €70,40
 
Cobo Contact switch PTO shaft mechanical with blade terminal connection
10%
Cobo
Contact switch PTO shaft mechanical with blade terminal connection
Version: Mechanical with blade terminal connection.
€60,75 €50,21 €54,95 €45,41
 
BOSCH Sensor hydraulic pressure lifting height
12%
BOSCH
Sensor hydraulic pressure lifting height
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
 
Temperature sensor transmission oil temperature
5%
Temperature sensor transmission oil temperature
Version: Transmission oil temperature.
€35,96 €29,72 €34,15 €28,22
 
GRANIT Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
GRANIT
Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270, 275, 283...
€23,70 €19,59
 
Walterscheid Adapter plate rail width 322 mm, hole pattern 140 x 80 mm, M20
21%
Walterscheid
Adapter plate rail width 322 mm, hole pattern 140 x 80 mm, M20
Hole (mm): M20 | Detent pin Ø (mm): 22 | Hole pattern (mm): 140 x 80 | Rail widt...
€554,06 €457,90 €435,30 €359,75
 
Showing 73 - 96 of 343

Massey Ferguson 8240 parts for the PTO clutch, cab and hitch

A slipping PTO is one of the classic jobs on a Massey Ferguson 8240, which is why inner and outer plates for the PTO clutch sit on this page next to more than 350 other parts that fit this tractor. They come from GRANIT and from makers such as Scharmüller, Cobo, HELLA and GRAMMER, and cover the engine bay, the cab, lighting and the rear hitch.

What you can fit to an 8240

  • Driveline and engine: PTO clutch plates, starter motors, thermostats and O-rings, for example for the feed pump.
  • Sealing: seals and sealing rings, such as a seal for the tank sensor and a sealing ring for the rear window lock.
  • Cab: gas struts for the rear window, mirrors, tractor seats, contact switches and push buttons.
  • Lighting: work lamps from HELLA and others, including a square built-in spotlight.
  • Hitching: drawbars for the hitch rail and bushes for the split pin lock.

Rebuilding the PTO clutch properly

Once the clutch housing is open, replace the inner and outer plates as a full pack. Fitting a fresh friction plate against a worn, heat-blued steel plate means it runs hot again and the PTO starts slipping under heavy load. Lay every steel plate on a flat bench and check that it sits true. While you are in there, renew the O-rings and sealing rings in that area too, so a small weep does not send you back into the housing a month later.

If the engine does not crank when you turn the key, do not condemn the starter straight away. A worn contact switch gives exactly the same symptoms. With a multimeter, check whether voltage reaches the starter signal wire with the key in the start position. If nothing arrives, the fault lies in the switch or the wiring and the starter can stay where it is. The two gas struts on the rear window age at the same rate, so change them as a pair. A single new strut pushes the glass open unevenly and strains the hinges. When fitting a new HELLA work lamp, look at the plug as well and protect the pins with a little contact grease.

Matching the part to your tractor

The type plate on the tractor tells you exactly which 8240 you are working on. For a thermostat, starter or switch, your best clue is the number stamped on or stuck to the old part. Compare it with the product details on this page. For clutch plates, measure the thickness and the inner and outer size of the old plate with a caliper before ordering.

Other tractors in the 8200 series

If the 8240 shares the yard with another model from the same series, order through that tractor's own page so you only see the parts recorded for it:

Every other model page for the brand is gathered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart