Menu
EUR

Steyr 4110 Profi tractor parts & technical data

Servicing a Steyr 4110 Profi? This page has more than 200 parts that fit your tractor, including trailer couplings, electrics and lighting.

243 parts found for Steyr 4110 Profi
Show:
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
Position sensor linkage for lower link shaft
5%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
 
Potentiometer transmission for electronic control unit with connector
5%
Potentiometer transmission for electronic control unit with connector
Version: For electronic control unit, Connection cable with plug.
€145,39 €120,16 €138,10 €114,13
 
GRANIT LED work lights floodlight 28 W, 2692 lm, Ø 84 x 64 mm
5%
GRANIT
LED work lights floodlight 28 W, 2692 lm, Ø 84 x 64 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€65,87 €54,44 €62,55 €51,69
 
Cobo Glass lamp left
5%
Cobo
Glass lamp left
Installation location: Left.
€79,62 €65,80 €75,60 €62,48
 
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
5%
Sauermann
Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
 
Bosch/Rexroth Hydraulic pump 16 cm³, splines B 17 x 14, 9 splines, anticlockwise
5%
Bosch/Rexroth
Hydraulic pump 16 cm³, splines B 17 x 14, 9 splines, anticlockwise
Direction of rotation: Anticlockwise | Output volume (cc/rev): 16 | Drive shaft:...
€858,50 €709,50 €815,55 €674,01
 
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Scharmüller
Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colo...
€259,15 €214,17
 
Scharmüller Drawbar frame 16 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Scharmüller
Drawbar frame 16 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey | Version: ...
€769,00 €635,54
 
Scharmüller Drawbar pin-Ø 31,5 mm, 387 mm, category 2, black
Scharmüller
Drawbar pin-Ø 31,5 mm, 387 mm, category 2, black
Width (mm): 60 | Version: Standard | Height (mm): 30 | Length (mm): 387 | Traile...
€324,75 €268,39
 
Scharmüller Drawbar pin-Ø 31,5 mm, 750 mm, category 2, Kioti gray
Scharmüller
Drawbar pin-Ø 31,5 mm, 750 mm, category 2, Kioti gray
Load capacity (kg): 2200 | Pin Ø (mm): 31,5 | Version: Standard | Colour: Kioti ...
€377,90 €312,31
 
Eaton Planetary gear transmission, 994 g
5%
Eaton
Planetary gear transmission, 994 g
Reference no.: 5145497
€82,40 €68,10 €78,25 €64,67
 
WAECO PAG-compressor oil ISO 46, R134a - 250 ml can
WAECO
PAG-compressor oil ISO 46, R134a - 250 ml can
€23,95 €19,79
 
GRANIT Alternator 14 V, 120 A, flange 83 mm, Case IH, New Holland, Steyr
5%
GRANIT
Alternator 14 V, 120 A, flange 83 mm, Case IH, New Holland, Steyr
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): 83,0 | Nomina...
€241,75 €199,79 €229,65 €189,79
 
Scharmüller Drawbar frame for draw pendulum, rail 330 mm, Dc 55 kN, Kioti gray
Scharmüller
Drawbar frame for draw pendulum, rail 330 mm, Dc 55 kN, Kioti gray
Detent pin Ø (mm): 25 | Version: Prepared for drawbar | Colour: Kioti grey | Loa...
€1.034,55 €855,00
 
GRANIT PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
5%
GRANIT
PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042.
€329,35 €272,19 €312,85 €258,55
 
Scharmüller Drawbar ball 50, rail 295 mm, pin Ø 25 mm, 200 kg, black
12%
Scharmüller
Drawbar ball 50, rail 295 mm, pin Ø 25 mm, 200 kg, black
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 200 ...
€813,42 €672,25 €719,35 €594,50
 
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
10%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
€72,68 €60,07 €65,75 €54,34
 
Fender bracket right rotatable complete Case IH, Steyr, New Holland
10%
Fender bracket right rotatable complete Case IH, Steyr, New Holland
€597,24 €493,59 €540,35 €446,57
 
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
12%
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
16%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.108,13 €915,81 €933,36 €771,37
 
Sensor wheel speed Hall Matteffekt, connection cable with plug
5%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable wi...
€112,05 €92,60 €106,40 €87,93
 
GRANIT Sensor power take-off speed, connection cable with plug
10%
GRANIT
Sensor power take-off speed, connection cable with plug
Version: PTO shaft (speed), PTO speed, Connection cable with plug.
€90,92 €75,14 €82,25 €67,98
 
Cobo Rear light left 291 x 134 x 218 mm, M5, 12 V
10%
Cobo
Rear light left 291 x 134 x 218 mm, M5, 12 V
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Width: 291 mm. Form: Rectangular, corn...
€147,76 €122,12 €133,65 €110,45
 
Showing 49 - 72 of 243

Steyr 4110 Profi parts

A tractor that lives on the drawbar

A Steyr 4110 Profi rarely runs solo. Trailers, tankers and mounted kit all lean on the hitch, the driveline and the driver's seat. This page lists more than 200 new parts that fit the 4110 Profi, from makers such as GRANIT, Scharmüller, Sauermann, Cobo and GRAMMER.

For coupling up there are ball drawbars, drawbar conversion kits, the Piton Fix, top drawbars and height adjustable adapter plates. Under the bonnet you will find multi-rib belts, a fan clutch, a torsion damper and a silencer. In the cab there are tractor seats, for example an air suspended seat with a fabric cover, plus mirrors, gas struts for the rear window and push button switches. A transmission sensor for the PTO, complete with lead and plug, rounds things off.

How to match a part to your 4110 Profi

The 4110 belongs to the Steyr Profi series. Begin with the type plate on the tractor and take down the model and serial number. For anything on the hitch, the rail width and pin diameter decide whether it fits, so measure the old part if the markings have worn off. Belts, sensors and dampers usually carry a reference number that you can compare with the product description. For a seat, check the bolt pattern of the base against your seat console.

Tip: when the seat starts to bottom out

An air suspended seat that sinks during the day or bottoms out on rough ground usually has a leak in the air spring or the levelling valve. Listen for a hiss with the seat loaded and check the hose connections first, as a cracked fitting is cheaper than a new seat. If the seat is worn through or the frame has play, replacing the whole seat is often the sensible fix. Check that your new seat gets a proper power feed for its own compressor before you bolt it down.

Under the bonnet, a squealing multi-rib belt is worth checking together with the tensioner and idler pulleys, since a worn bearing there destroys a new belt in a short time.

Other tractors in the Profi series

Each of these Profi models has its own page listing the parts confirmed for that tractor:

The 4120 Profi, the 6145 Profi and every other model can be reached through the Steyr parts overview.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart