Menu
EUR

Steyr 4120 Profi tractor parts & technical data

Browse more than 200 parts that fit the Steyr 4120 Profi, from trailer couplings and electrics to engine components, all gathered on a single page.

175 parts found for Steyr 4120 Profi
Show:
GRANIT LED headlight dipped beam 118,1 x 112,8 x 114,3 mm, H7
10%
GRANIT
LED headlight dipped beam 118,1 x 112,8 x 114,3 mm, H7
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€141,27 €116,75 €127,80 €105,62
 
Cobo Indicator/position light oval PY21W, R5W left
5%
Cobo
Indicator/position light oval PY21W, R5W left
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. C...
€107,88 €89,16 €102,45 €84,67
 
GRANIT Drive shaft 1115 mm Case IH, New Holland, Steyr
5%
GRANIT
Drive shaft 1115 mm Case IH, New Holland, Steyr
Length (mm): 1115
€530,44 €438,38 €503,90 €416,45
 
MAHLE Air conditioning compressor 12 V, pulley Ø 116 mm, 4 grooves, PAD
40%
MAHLE
Air conditioning compressor 12 V, pulley Ø 116 mm, 4 grooves, PAD
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | Additional ...
€551,02 €455,39 €327,95 €271,03
 
Scharmüller Drawbar 526 mm, 50 x 30 mm, pin 31,5 mm, position 2
Scharmüller
Drawbar 526 mm, 50 x 30 mm, pin 31,5 mm, position 2
Colour: Kubota grey | Width (mm): 50 | Category: Drawbar | Lock: Pin | Trailer l...
€324,75 €268,39
 
Scharmüller Drawbar retrofit kit 820 x 80 x 35 mm, 46,8 kN, 1500 kg, cat. 2, black
Scharmüller
Drawbar retrofit kit 820 x 80 x 35 mm, 46,8 kN, 1500 kg, cat. 2, black
Version: Retrofit kits | Pin Ø (mm): 31,5 | Rail width (mm): 330 | Length (mm): ...
€690,10 €570,33
 
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
5%
CARLISLE
External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
 
GRANIT Contact switch driver’s seat with magnet, electric
GRANIT
Contact switch driver’s seat with magnet, electric
Version: Driver’s seat Switch assembly with magnet
€97,80 €80,83
 
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
5%
LUK
Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31X35.
€551,15 €455,50 €523,55 €432,69
 
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
5%
LUK
Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31x35. Menke no.: 92343.
€734,02 €606,63 €697,30 €576,28
 
Compressed air sensor M12 x 1,5 Case IH, New Holland
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5.
€278,45 €230,12
 
Outer plate hand brake Case IH, New Holland, Steyr
5%
Outer plate hand brake Case IH, New Holland, Steyr
€120,93 €99,94 €114,85 €94,92
 
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
5%
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
€233,24 €192,76 €221,55 €183,10
 
Scharmüller Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
12%
Scharmüller
Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pattern: 140 ...
€533,61 €441,00 €471,90 €390,00
 
Scharmüller Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
12%
Scharmüller
Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
Rail width: 295 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000...
€1.395,13 €1.153,00 €1.233,85 €1.019,71
 
Borg Warner Cooling fan including fan clutch Ø 550 mm Maxxum
Borg Warner
Cooling fan including fan clutch Ø 550 mm Maxxum
Ø: 550 mm.
€458,40 €378,84
 
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
 
GRANIT Water pump with gasket Case IH, Steyr, New Holland
5%
GRANIT
Water pump with gasket Case IH, Steyr, New Holland
Reference no.: S.68286.
€93,30 €77,11 €88,60 €73,22
 
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
5%
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
€121,56 €100,46 €115,45 €95,41
 
GRANIT V-belt tensioner Ø 74 mm, width 34 mm
5%
GRANIT
V-belt tensioner Ø 74 mm, width 34 mm
Outer Ø: 74 mm. Width: 34 mm.
€153,37 €126,75 €145,70 €120,41
 
GRANIT Outlet valve Case IH, Steyr
GRANIT
Outlet valve Case IH, Steyr
€32,85 €27,15
 
GRANIT Metering unit with 3 fixing points Case IH, New Holland, Landini
5%
GRANIT
Metering unit with 3 fixing points Case IH, New Holland, Landini
€164,35 €135,83 €156,10 €129,01
 
Showing 73 - 96 of 175

Steyr 4120 Profi parts for hitching, the cab and the engine bay

A 4120 Profi rarely spends a working day without something on the back. Tipping trailers, bale carts and slurry tankers all lean on the hitch, which is why a good share of the more than 200 parts on this page sit at the rear of this Steyr. They come from GRANIT, Scharmüller, Sauermann, GRAMMER and Cobo.

Drawbars, Piton Fix and adapter plates

For the hitch rail there are drawbars with a pin or a ball, top drawbars, Piton Fix hooks and a drawbar retrofit kit. An adapter plate lets you mount a flange hitch or another system on the existing rail, which is useful when a farm moves its heavier trailers over to ball couplings.

Whenever you swap hitches, check the locking pin. If it does not drop fully into place, the drawbar can creep out of the rail under load. Once the pin hole has worn oval, replace the whole part rather than just the pin.

Seat, mirrors and cab fittings

Long days on a worn seat end up in your back. You will find tractor seats here, including an air suspended GRAMMER seat with fabric upholstery, plus mirrors for the view behind. Gas struts hold the rear window open, and the front PTO has a push button switch that comes with its connection cable and plug.

A tip on those gas struts: fit them with the piston rod pointing down. That keeps the seal inside the cylinder wetted with oil, so the strut holds its force for longer. If the rear window slowly sags in cold weather, change both struts together so they push evenly.

Belts, cooling and sensors

Under the bonnet you can fit multi-rib belts and complete belt kits, a radiator and O-rings, including one for the thermostat housing. On the transmission there is a PTO speed sensor with connection cable. When the display stops showing PTO speed while the shaft is clearly turning, that sensor and its plug are the first things worth checking.

Getting the right part first time

The type plate shows the 4120 Profi designation together with the chassis number. Keep that number handy in case parts differ within the type, for example by cab version. For belts and seals it is often quicker to read the number off the old part and search on that.

If you run several tractors from the Profi line, each of the others has a page of its own: Steyr 4110 Profi, Steyr 4115 Profi, Steyr 4130 Profi, Steyr 4145 Profi, Steyr 6125 Profi and Steyr 6140 Profi. Order for each machine on the page of its own type. Every other model from the brand is reachable through Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart