Menu
EUR

Steyr 4145 Profi CVT tractor parts & technical data

Looking after a Steyr 4145 Profi CVT? More than 60 parts for this Profi CVT series model are gathered here, such as electrics and three-point linkage parts.

63 parts found for Steyr 4145 Profi CVT
Show:
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€693,63 €573,25 €611,61 €505,46
You save 12%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€676,60 €559,17
AdBlue supply unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.623,63 €1.341,84 €1.493,74 €1.234,50
You save 8%
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
Description: Oxidation catalyst. Version: -40 to 850°C. More
Description: Oxidation catalyst. Version: -40 to 850°C.
€117,72 €97,29 €108,30 €89,51
You save 8%
Fan clutch VAR - 758700 Steyr, New Holland, Case IH
€786,84 €650,28 €723,89 €598,26
You save 8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Water pump Case IH Maxxum 110-150, Puma 115-240, Vestrum 100-130
Description: With Tier 4A/B and Stage V machines, note the engine type.. More
Description: With Tier 4A/B and Stage V machines, note the engine type...
€118,57 €97,99 €109,08 €90,15
You save 8%
Humidity sensor exhaust aftertreatment Steyr, Case IH
€282,20 €233,22 €259,62 €214,57
You save 8%
Temperature sensor straight 50 mm Case IH, New Holland, Steyr
Description: SCR/oxidation catalytic converter. More
Description: SCR/oxidation catalytic converter.
€108,01 €89,26 €99,37 €82,12
You save 8%
Crankshaft seal for Case IH, Steyr, New Holland
€36,09 €29,83 €33,20 €27,44
You save 8%
AdBlue injection unit DM 2.5, 7,2 kg/hr
Description: DM 2.5, 7.2 kg/hr. More
Description: DM 2.5, 7.2 kg/hr.
€397,84 €328,79 €366,01 €302,49
You save 8%
Crankshaft seal rear Case IH, Steyr, New Holland
€96,82 €80,02 €89,07 €73,62
You save 8%
Belt kit 1550 mm, 8 ribs, belt tensioner, spanpoelie
Version: For main belt drive. Contents: Belt, belt tensioner, idler pulley. Belt length: 1550 mm. Ribs: 8 n. More
Version: For main belt drive. Contents: Belt, belt tensioner, idler pu...
€446,81 €369,26 €411,07 €339,72
You save 8%
Tank cap New Holland CR 7.90 - CR 10.90, CX 5.80 - CX 8.90
€49,71 €41,08 €45,73 €37,80
You save 8%
Temperature sensor straight 50 mm
€108,01 €89,26 €99,37 €82,12
You save 8%
Showing 49 - 63 of 63

Steyr 4145 Profi CVT parts for hitching, charging and sealing

The way a 4145 Profi CVT is set up at the back decides which trailers and implements it can pull, so hitch hardware takes up a good part of this page. Altogether you will find more than 60 new replacement parts that fit the Steyr 4145 Profi CVT, from GRANIT, Scharmüller, MAHLE, Wabco and CBM. They are aftermarket parts, not dealer stock, intended for repairs on the farm or in a workshop.

Identifying the right part

Steyr offered several models in the Profi CVT line that are hard to tell apart from the outside, so read the serial plate before you order. For hitch components, measure the rail width of the existing guide and the diameter of the locking pin. For an alternator or a sensor, the reference number on the housing of the old part is the quickest way to a match.

Hitch systems you can rebuild

  • Drawbar ball hitches for the pick-up rail, with top drawbars and adjustable adapter plates to set the height
  • Automatic hitches for trailers with a ring eye, plus a mechanical and a hydraulic top hitch
  • Piton Fix for heavy tandem trailers
  • Drawbars such as a draw pendulum retrofit kit for trailed implements
  • Drawbar frames when the guides themselves have worn

Hitch height matters more than many drivers think. If the trailer drawbar runs at an angle, the ring eye works crooked in the jaw and wears on one side. An adapter plate or a repositioned top drawbar brings it back to level and spares the eye, the pin and the guides.

Engine and cab

Under the bonnet there are temperature sensors, alternators, an aircon compressor and a rear crankshaft seal. For the cab there is a main mirror, the part that tends to get clipped in a narrow gateway. A rear crankshaft seal is a bigger job, as the tractor has to be split, so it makes sense to inspect the clutch side and the flywheel while everything is apart.

A word on alternators. When the charge light comes on, check the simple things first: belt tension, the battery terminals and the earth strap between engine and chassis. A corroded earth can make a perfectly good alternator look faulty. If the alternator really is the problem, disconnect the battery before you remove it, note where each cable goes and clean the terminals before fitting the new unit. A loose main cable on the B+ post will burn and can take the new alternator with it.

If you also have other tractors from this line, each has its own page: the Steyr 4120 Profi CVT, the Steyr 4125 Profi CVT, the Steyr 4130 Profi CVT and the Steyr 4135 Profi CVT. Every other model of the brand is reachable from Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart