Menu
EUR

Steyr 6145 CVT tractor parts & technical data

Drivers of the Steyr 6145 CVT can choose from more than 400 parts that fit, with trailer couplings, electrics and lighting among the options.

420 parts found for Steyr 6145 CVT
Show:
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
18%
Walterscheid
Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. C...
€1.871,87 €1.547,00 €1.544,25 €1.276,24
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longit...
€1.245,00 €1.028,93
 
Mirror black unheated 185 x 130 mm, rod Ø 10, 12, 13 mm
5%
Mirror black unheated 185 x 130 mm, rod Ø 10, 12, 13 mm
Tractor type: all types with cover, half-cab and cab.
€33,53 €27,71 €31,85 €26,32
 
Scharmüller Drawbar frame 12,9 kN, 500 kg, rail 160 mm, pin Ø 25 mm, standard
Scharmüller
Drawbar frame 12,9 kN, 500 kg, rail 160 mm, pin Ø 25 mm, standard
Guide width (mm): 16 | Load capacity (kg): 500 | Version: Standard | Colour: Kub...
€643,75 €532,02
 
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
12%
Scharmüller
Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 k...
€1.024,14 €846,40 €905,70 €748,51
 
GRANIT Tank cap thread 45 mm
GRANIT
Tank cap thread 45 mm
Version: Thread: 45 mm.
€21,95 €18,14
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.175,21 €971,25 €923,35 €763,10
 
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
Position sensor linkage for lower link shaft
5%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
 
GRANIT Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
GRANIT
Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
Version: Function: engine and PTO shaft speed (front), M18 x 1.5 mm, Connection ...
€353,30 €291,98
 
Mirror unheated 318 x 186 mm, rod Ø 14 - 20 mm
10%
Mirror unheated 318 x 186 mm, rod Ø 14 - 20 mm
Tractor type: Steyr Cabine SK2, 9105, 9115, 9125, 9145, CVT 120, 130, 150, 170, ...
€46,18 €38,17 €41,75 €34,50
 
Sauermann Handle set trailer coupling Ø 8 mm Case IH, New Holland, Steyr
5%
Sauermann
Handle set trailer coupling Ø 8 mm Case IH, New Holland, Steyr
€133,70 €110,50 €127,00 €104,96
 
Scharmüller Retrofit kit drawbar 1032 mm, 80 x 50 mm, pin 31,5 mm, 89,3 kN, position 2
Scharmüller
Retrofit kit drawbar 1032 mm, 80 x 50 mm, pin 31,5 mm, 89,3 kN, position 2
Lock: Pin | Colour: Kubota grey | Height (mm): 50 | Mounting position: 2 | Load ...
€814,10 €672,81
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
5%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€586,12 €484,40 €556,80 €460,17
 
SACHS Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
5%
SACHS
Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation location: ...
€166,42 €137,54 €158,00 €130,58
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. o...
€595,38 €492,05 €565,60 €467,44
 
Showing 25 - 48 of 420

Steyr 6145 CVT parts under the bonnet and at the rear

Lift the bonnet on a 6145 CVT and the first parts you touch are the gas struts that hold it up. If the bonnet drifts down on its own, the struts are due, and you change them with the bonnet safely propped. This page holds more than 400 replacement parts that fit this Steyr, from GRANIT, Scharmüller, Sauermann, MAHLE, GRAMMER and others.

Cooling, turbo and alternator

For the cooling system there are water pump gaskets and O-rings for the thermostat housing. Whenever the thermostat housing comes apart, a new O-ring goes back in. Top up with coolant at the right mix afterwards and bleed the system properly, otherwise an air pocket stays trapped at the thermostat and the temperature gauge starts to jump. On the turbo there is a seal in the oil return line. Oil mist under the turbo often comes from that seal rather than from the turbo itself, so check it first. Sealing rings, alternators and aircon compressors complete this group.

Fender controls and cab

For the external controls there are raise and lower rocker switches on the fender, plus push button switches for the front PTO with cable and plug. These switches live outside in all weather and take a beating every time the tractor is pressure washed. A dab of dielectric grease on the connector during fitting keeps moisture out and saves fault finding later. In the cab the list covers tractor seats, mirrors and gas struts. A GRAMMER seat bolts onto the existing console, so compare the spacing of the mounting holes with your old seat before ordering.

Hitch, drawbar and clevis

At the rear there are hitches, hitch frames, drawbars and automatic clevis hitches. On a clevis, check the wear on the coupling pin and the jaw. A worn pin means slack in the coupling and a jolt every time you pull away or brake with a heavy trailer. Measure the rail and pin on your own frame before ordering a hitch.

To find the version that belongs on your 6145 CVT, begin with the rating plate and serial number. The old part often carries a reference number you can check against the product details. The Steyr CVT line has more models with their own page: Steyr 6150 CVT, Steyr 6165 CVT, Steyr 6175 CVT, Steyr 6185 CVT, Steyr 6195 CVT and Steyr 6240 CVT. Use the page that matches each tractor, so the part is certain to belong to that model. Other Steyr tractors are gathered on the overview page Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart