Menu
EUR

Steyr 6195 CVT tractor parts & technical data

More than 250 parts are matched to the Steyr 6195 CVT. Among them are trailer couplings, electrics, and steering and front axle components.

283 parts found for Steyr 6195 CVT
Show:
Thrust washer Case IH, Renault, Steyr
5%
Thrust washer Case IH, Renault, Steyr
€66,79 €55,20 €63,45 €52,44
 
Carraro Pivot bush Carraro front axle 115 x 125 x 44 mm
5%
Carraro
Pivot bush Carraro front axle 115 x 125 x 44 mm
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 44 mm.
€69,58 €57,50 €66,10 €54,63
 
GRANIT Wheel brake cylinder mineral oil Case IH, New Holland, Steyr
5%
GRANIT
Wheel brake cylinder mineral oil Case IH, New Holland, Steyr
€1.588,73 €1.313,00 €1.509,25 €1.247,31
 
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
5%
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
€314,60 €260,00 €298,85 €246,98
 
Scharmüller Drawbar bracket 200 x 120 mm, bore M16, inner width 124 mm, black
12%
Scharmüller
Drawbar bracket 200 x 120 mm, bore M16, inner width 124 mm, black
Hole pattern: 200 x 120 mm. Hole: M16 mm. Colour: Black. Internal width: 124 mm....
€287,01 €237,20 €253,80 €209,75
 
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
5%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
 
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
12%
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
16%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.108,13 €915,81 €933,36 €771,37
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
 
HELLA Rear light right hole spacing 110 mm, 12 V
23%
HELLA
Rear light right hole spacing 110 mm, 12 V
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 ...
€95,00 €78,51 €72,75 €60,12
 
HELLA Work lamp flood beam H9, 12 V, 65 W, square, upright
HELLA
Work lamp flood beam H9, 12 V, 65 W, square, upright
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Power consum...
€65,50 €54,13
 
GRANIT Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
10%
GRANIT
Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm.
€230,76 €190,71 €208,75 €172,52
 
GRANIT Cardan shaft bearing 50 x 72 x 12 mm Case IH, Renault, Steyr
5%
GRANIT
Cardan shaft bearing 50 x 72 x 12 mm Case IH, Renault, Steyr
Height 1 (mm): 12 | Outer Ø (mm): 72 | Dimensions (mm): 50 x 72 x 12 | Inner Ø (...
€150,77 €124,60 €143,20 €118,35
 
GRANIT External plate PTO clutch 3 mm, inner 135 mm, outer 193,5 mm
5%
GRANIT
External plate PTO clutch 3 mm, inner 135 mm, outer 193,5 mm
Version: Thickness: 3 mm Inner: 135 mm Outer: 193.5 mm
€104,04 €85,98 €98,80 €81,65
 
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
5%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-rin...
€55,05 €45,50 €52,25 €43,18
 
GRANIT Lever switch joystick (joystick), with connector
5%
GRANIT
Lever switch joystick (joystick), with connector
Version: Joystick Connection cable with plug
€690,55 €570,70 €656,00 €542,15
 
Rocker switch dashboard sprung front axle, PTO shaft
5%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung fr...
€92,65 €76,57 €88,00 €72,73
 
GRANIT Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
5%
GRANIT
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€317,36 €262,28 €301,45 €249,13
 
Carraro Pin upper arm Carraro front axle Ø 37 / 45 / 59,5 mm, length 233 mm
5%
Carraro
Pin upper arm Carraro front axle Ø 37 / 45 / 59,5 mm, length 233 mm
€409,59 €338,50 €389,10 €321,57
 
Showing 73 - 96 of 283

Parts for the Steyr 6195 CVT

Lifting the bonnet on a Steyr 6195 CVT should be easy, and if it is not, the gas struts are worn. That is one of many small jobs covered by this page, which lists more than 250 parts for the 6195 CVT from GRANIT, Scharmüller, HELLA, GRAMMER and Cobo.

Bonnet struts and engine seals

The heavy bonnet is held up by gas struts. If it opens sluggishly or sinks on its own, replace both struts at the same time, and never work under a bonnet resting on tired struts. For the engine there are gaskets, including one for the water pump, along with seals, sealing rings and O-rings, for example for the oil filler cap.

Belt drive and charging

Alternators and multi-rib belts keep the charging system working. Replace a belt that shows cross cracks or glazed flanks, and check the tensioner pulley at the same time. A tensioner that rattles or runs rough will ruin a new belt quickly.

Dashboard switches

Rocker switches for the dashboard, such as the one for the front work lights, and push button switches, for instance for front linkage lowering, are available too. Before replacing a switch, check the plug at the back. Vibration can work it loose and cause exactly the same fault. A shot of contact spray on the connector sometimes cures it. Only when the switch itself sticks or no longer clicks cleanly is a new one needed.

Cab and rear hitch

Air suspended tractor seats and work lamps, including HELLA flood beams, cover the cab. At the rear there are drawbars, adapter plates, automatic hitches and top drawbars. Measure rail width and hole pattern on the frame currently fitted. An automatic hitch saves time when trailers change several times a day, while a plain drawbar with a towing eye covers routine haulage. Always renew a worn locking pin when the hitch is replaced.

Identifying the correct part

The type plate shows the model and serial number. The reference number on the old part decides it, so compare it with the product description. For switches, also check the symbol and function, and for a multi-rib belt the number of ribs and the length of the old belt.

The other tractors in the Steyr CVT series each have their own page with the parts for that type:

The 6160 CVT, the 6230 CVT and all other Steyr tractors are reachable through the overview of Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart