Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Steyr 6220 CVT tractor parts & technical data

Servicing a Steyr 6220 CVT? Choose from more than 90 matching parts here, such as trailer couplings, electrics, and steering and front axle components.

84 parts found for Steyr 6220 CVT
Show:
Rail pressure valve Case IH, Steyr, New Holland
€269,95 €223,10 €248,35 €205,25
You save 8%
Base plate including ring Ø 50 mm, bottom thickness 12,5 mm
€106,69 €88,17 €98,15 €81,12
You save 8%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 311 mm, 4000 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.231,07 €1.017,41 €1.077,64 €890,61
You save 12%
Seal kit hydraulic steering Case IH, Steyr, New Holland
€214,41 €177,20 €197,26 €163,02
You save 8%
Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€284,35 €235,00 €261,60 €216,20
You save 8%
AdBlue supply unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.623,63 €1.341,84 €1.493,74 €1.234,50
You save 8%
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
Description: Oxidation catalyst. Version: -40 to 850°C. More
Description: Oxidation catalyst. Version: -40 to 850°C.
€117,72 €97,29 €108,30 €89,51
You save 8%
Seal Case IH, Steyr
Air hose intercooler inner-Ø 65 / 75 mm, length 98 mm
Inner Ø: 65 / 75 mm. Length: 98 mm. More
Inner Ø: 65 / 75 mm. Length: 98 mm.
€70,43 €58,21 €64,80 €53,55
You save 8%
Fan clutch Case IH, Steyr, New Holland
€479,01 €395,88 €440,69 €364,21
You save 8%
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm. Installation location: rechts. More
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis in...
€498,60 €412,07 €458,71 €379,10
You save 8%
Fender bracket right complete Puma CVX 185-240
€697,74 €576,64 €641,92 €530,51
You save 8%
Fender bracket left complete Puma CVX 185-220
€606,14 €500,94 €557,65 €460,87
You save 8%
Fender bracket right complete Puma CVX 185-220
€578,92 €478,45 €532,61 €440,17
You save 8%
Spring right fender Case IH, New Holland, Steyr
€46,02 €38,03 €42,34 €34,99
You save 8%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.368,70 €1.131,16 €1.247,49 €1.030,99
You save 9%
Scharmüller Automatic hitch rail width 255 mm, coupling pin 38 mm
Scharmüller
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.236,75 €1.022,11 €1.083,22 €895,22
You save 12%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Humidity sensor exhaust aftertreatment Steyr, Case IH
€282,20 €233,22 €259,62 €214,57
You save 8%
Tank cap Case IH, New Holland, Steyr
€45,08 €37,26 €41,47 €34,28
You save 8%
Ammonia sensor exhaust gas NH3, 8-pin, 1.000 mm
Description: Model year 07/17 ->. More
Description: Model year 07/17 ->.
€860,01 €710,75 €791,21 €653,89
You save 8%
Temperature sensor straight 50 mm Case IH, New Holland, Steyr
Description: SCR/oxidation catalytic converter. More
Description: SCR/oxidation catalytic converter.
€108,01 €89,26 €99,37 €82,12
You save 8%
Cylinder head bolt M12 x 130 mm Case IH, Steyr, New Holland
Dimensions: M12 x 130 mm. More
Dimensions: M12 x 130 mm.
€4,74 €3,92
Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
Outer Ø: 74 mm. Width: 47 mm. More
Outer Ø: 74 mm. Width: 47 mm.
€114,48 €94,61 €105,32 €87,04
You save 8%
Fender bracket left complete Puma CVX 185-240
€697,74 €576,64 €641,92 €530,51
You save 8%
Scharmüller Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.211,09 €1.000,90 €1.114,20 €920,83
You save 8%
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 180 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.123,39 €928,42 €1.033,52 €854,15
You save 8%
AdBlue injection unit DM 2.5, 7,2 kg/hr
Description: DM 2.5, 7.2 kg/hr. More
Description: DM 2.5, 7.2 kg/hr.
€397,84 €328,79 €366,01 €302,49
You save 8%
Thrust bearing Maxxum, Optum, Puma, Vestrum Case IH, New Holland, Steyr
Air hose intercooler inner-Ø 63 mm, length 177 mm
Inner Ø: 63 mm. Length: 177 mm. More
Inner Ø: 63 mm. Length: 177 mm.
€214,02 €176,88 €196,90 €162,73
You save 8%
Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
Installation location: Tector 6 / 7. More
Installation location: Tector 6 / 7.
€54,94 €45,41 €50,54 €41,77
You save 8%
Temperature sensor straight 50 mm
€108,01 €89,26 €99,37 €82,12
You save 8%
Cylinder head bolt M12 x 150 mm Case IH, Steyr, New Holland
Dimensions: M12 x 150 mm. More
Dimensions: M12 x 150 mm.
€5,76 €4,76
Tank cap New Holland CR 7.90 - CR 10.90, CX 5.80 - CX 8.90
€49,71 €41,08 €45,73 €37,80
You save 8%
Scharmüller Drawbar frame 2000 kg, aanhangerlast 24000 kg, Unimog U1300
Scharmüller
suitable for: Mercedes Benz. Series: Unimog Typ 425. Category: Bearing supports. Version: Unimog end cross member. Colour: Black. Trailer load: 24000 ... More
suitable for: Mercedes Benz. Series: Unimog Typ 425. Category: Bearing...
€2.609,18 €2.156,35 €2.450,45 €2.025,17
You save 6%
Showing 49 - 84 of 84

Steyr 6220 CVT parts: hitching, sensors and hoses

On a 6220 CVT that spends its days pulling heavy trailers, the hitch takes the punishment. Play in the rail, a worn pin or an automatic hitch that no longer latches cleanly are the usual reasons to replace something at the back. That is why the coupling hardware comes first here: drawbars, top drawbars, drawbar frames, adapter plates, base plates, automatic hitches and a Piton Fix, with Scharmüller and GRANIT among the makers.

Measure the rail before you order

Two dimensions decide whether a new drawbar slides into the frame without grinding: the width of the rail and the diameter of the locking pin. Take both from your own Steyr before choosing a part. A height adjustable adapter plate lets you move the coupling point up or down to suit a particular trailer, or fit a different hitch type onto the same frame. Once it is mounted, check that the locking lever drops fully into its end position, first with no trailer attached and then again under load.

Engine, cooling and exhaust components

All told there are more than 90 parts for this tractor. Beyond the hitch you will find NOX sensors, temperature sensors, radiator hoses, air hoses, tank caps and cylinder head bolts, from brands such as Wabco, Vitesco and MAHLE. When a NOX sensor throws a fault code, swap it with the exhaust cold. Unplug the connector before you unscrew the sensor so the lead does not twist, then route the new lead exactly where the old one ran, clear of hot surfaces. With a radiator hose, replace any corroded or distorted clamps at the same time.

Fender brackets and their springs are here too. A bracket that has worked loose often announces itself as a tapping noise in the cab, and a tired spring lets the fender move when the steering is on full lock.

Matching parts to your 6220 CVT

The type plate confirms you are dealing with a 6220 CVT. For sensors and hoses, the number stamped or printed on the old part is the quickest route, so compare it with the reference number listed with each product on this page. For hitch components, the dimensions of what is fitted now usually tell you more than any number.

The 6220 belongs to the Steyr CVT line, and each model in that line has its own page. If the yard holds more than one of them, order through the page for each machine: Steyr 6240 CVT, Steyr 6165 CVT, Steyr 6150 CVT, Steyr 6195 CVT, Steyr 6175 CVT and Steyr 6145 CVT. For older Steyr tractors and the remaining ranges, head to Steyr parts and pick the right model there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart