Menu
EUR

Steyr 650 tractor parts & technical data

For the Steyr 650 from the Plus Series you will find more than 80 parts that fit this tractor, electrics among them, all together on one page.

89 parts found for Steyr 650
Show:
Water pump double pulley Ø 110/137 mm, fastening 4 x M8 and 4 x M10
€265,61 €219,51 €244,36 €201,95
You save 8%
Repair set water pump shaft length 195 mm Steyr 40-768 Plus
Dimensions: Shaft length = 195 mm. More
Dimensions: Shaft length = 195 mm.
€80,86 €66,83
Water pump double pulley Ø 110/154 mm, fastening 4 x M8
To fit: Steyr 540, 545, 548A, 650, 658, 658A, 760, 768, 768A, 670, 8045, 8045A, 942, 948, 40, 50, 60, 70. Description: With gasket. More
To fit: Steyr 540, 545, 548A, 650, 658, 658A, 760, 768, 768A, 670, 804...
€272,31 €225,05 €250,53 €207,05
You save 8%
Radiator hose, bottom Ø 38 mm, length 500 mm Steyr, Case IH
Inner Ø: 38 mm. Length: 500 mm. More
Inner Ø: 38 mm. Length: 500 mm.
€106,59 €88,09 €98,06 €81,04
You save 8%
Inlet valve for turbocharger motors, engine WD 308 - WD 611 Steyr
O-ring cylinder liner 109 x 5 mm Steyr 8045-8130, 942, 948
Dimensions: 109 x 5 mm. More
Dimensions: 109 x 5 mm.
€9,38 €7,75
Injection nozzle Steyr 540-768
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164. More
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164.
€49,15 €40,62 €45,22 €37,37
You save 8%
Linkage Steyr 99001, Series 80-8170
Technical data: can be used in 80 series. More
Technical data: can be used in 80 series.
€182,41 €150,75 €167,82 €138,69
You save 8%
Single pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. More
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17.
€476,90 €394,13 €438,75 €362,60
You save 8%
Joint 160 mm, hole up to hole 116 mm, Ø 25, 17,5 mm Steyr 540-8075
Dimensions: Total length = 160, Hole centre to hole centre = 116, Ø = 25, 17.5 mm. More
Dimensions: Total length = 160, Hole centre to hole centre = 116, Ø =...
€39,77 €32,87 €36,59 €30,24
You save 8%
Pin Ø 18 x 91 mm Steyr 540-768, 8045-8075
Dimensions: Ø = 18, Length = 91 mm. More
Dimensions: Ø = 18, Length = 91 mm.
€14,76 €12,20
V-belt Steyr 650-760 Plus
Thermostat Ø 38/38/22 mm, 87 °C Case IH, Steyr
Ø: 38/38/22 mm. Temperature: 87 °C. More
Ø: 38/38/22 mm. Temperature: 87 °C.
€57,17 €47,25 €52,60 €43,47
You save 8%
Piston ring set 3 rings Ø 100 mm, 2,5 mm / 2,5 mm / 4 mm Steyr
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm.
€42,51 €35,13 €39,11 €32,32
You save 8%
Silencer vertical 1070 mm, Ø 55 mm, exhaust Ø 43 mm Steyr
Version: Length: 1070 mm, Inner Ø: 55 mm, Outlet Ø: 43 mm. Dimensions: Length: 1070 mm, Inner Ø: 55 mm. Inner Ø: 55 mm. Length: 1070 mm. More
Version: Length: 1070 mm, Inner Ø: 55 mm, Outlet Ø: 43 mm. Dimension...
€160,80 €132,89 €147,94 €122,26
You save 8%
Piston set, complete 4 rings, Ø 100 mm, piston pin Ø 35 x 83 mm
Dimensions: 4 rings, Ø 100 mm, Gudgeon pin Ø 35 x 83 mm, Combustion chamber Ø 53.8 mm, Combustion chamber depth 19.5 mm. Description: Supplied with... More
Dimensions: 4 rings, Ø 100 mm, Gudgeon pin Ø 35 x 83 mm, Combustion ...
€207,58 €171,55 €190,97 €157,83
You save 8%
Lever steering valve SB7, 3-hole Fendt, Case IH, Steyr, Schlüter
Single hydraulic pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of rotation: Anticlockwise. Line connection suction side: Ø 40 mm, 4-hole, ... More
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direct...
€490,15 €405,08 €450,94 €372,68
You save 8%
Bosch/Rexroth Hydraulic pump anticlockwise 8 cm³/rpm., taper 1:5, Ø 17 x 17
Bosch/Rexroth
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 1... More
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating...
€550,76 €455,17 €506,70 €418,76
You save 8%
Pin Ø 25 mm Steyr Series 80-8075, Series M 900, M 968-975
Dimensions: Ø: 25 mm. More
Dimensions: Ø: 25 mm.
€49,94 €41,27 €45,94 €37,97
You save 8%
Gasket exhaust Steyr 430-768
To fit as: Steyr 430, 540, 545, 548, 650, 658, 760, 768 More
To fit as: Steyr 430, 540, 545, 548, 650, 658, 760, 768
€4,15 €3,43
MANN-FILTER Fuel filter WK842
€18,79 €15,53
Brake lining 60 x 6 x 295 mm Steyr 288, 290, 650-768
€38,07 €31,46 €35,02 €28,95
You save 8%
Outlet valve Steyr engine WD 308, WD 311, WD 408, WD 611
€37,00 €30,58 €34,04 €28,13
You save 8%
Inlet valve engine WD 308 - WD 611 Steyr
€40,83 €33,74 €37,56 €31,04
You save 8%
Thrust washer set Steyr Plus 40-768, 942, 948, 8045
€55,92 €46,21 €51,45 €42,52
You save 8%
Piston ring set 4 clamp, Ø 100 mm, 2,5 / 2,5 / 2,5 / 4 mm Steyr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring) / 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring) / 2.5 mm / 2...
€68,76 €56,83 €63,26 €52,28
You save 8%
Bolt set 3de steering valve 3x M8 x 230 Fendt, Case IH, Steyr, Schlüter
Technical data: 3x M8 x 230. More
Technical data: 3x M8 x 230.
€56,60 €46,78 €52,07 €43,03
You save 8%
Bolt set 4de steering valve 3x M8 x 280
Technical data: 3x M8 x 280. More
Technical data: 3x M8 x 280.
€67,87 €56,09 €62,44 €51,60
You save 8%
Joint spindle 190 mm, ball-Ø 28,5/34,25 mm, M30 x 3 Steyr
Dimensions: Length = 190, Ball Ø = 28.5/34.25, M30 x 3 mm. More
Dimensions: Length = 190, Ball Ø = 28.5/34.25, M30 x 3 mm.
€21,63 €17,87
Silencer vertical 1070 mm, Ø 55 mm Steyr 430-768
To fit as: Steyr 430, 540, 545, 548, 650, 658, 760, 768 More
To fit as: Steyr 430, 540, 545, 548, 650, 658, 760, 768
€160,80 €132,89 €147,94 €122,26
You save 8%
Brake lining 60 x 10 x 305 mm Steyr 650-768
€41,41 €34,22 €38,10 €31,49
You save 8%
KS Piston ring set 3 rings Ø 100 mm, 2,5 / 2,5 / 4 mm Steyr 540-760
KS
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm.
€53,84 €44,50 €49,53 €40,94
You save 8%
Connecting rod bearing standard Steyr engine WD 306 - WD 408
€57,50 €47,52 €52,90 €43,72
You save 8%
Lifting spindle right 420 - 520 mm, Ø 24,5 mm Steyr
Dimensions: Length = 420 - 520, Clevis inside = 40, Clevis outside = 71, Ø = 24.5 mm. Ø: 24,5 mm. Length: 420 - 520 mm. More
Dimensions: Length = 420 - 520, Clevis inside = 40, Clevis outside = 7...
€225,25 €186,16 €207,23 €171,26
You save 8%
Showing 49 - 89 of 89

Steyr 650 parts

Keeping an older Steyr working

Plenty of Steyr 650 tractors still do a regular week of work, and keeping one in good order comes down to sound replacement parts for the engine, cooling, clutch and hydraulics. This page carries more than 80 new Steyr 650 parts from GRANIT, MAHLE, FEBI, MANN-FILTER and Bosch/Rexroth.

Cooling system

There are radiator hoses and thermostats. To test a thermostat, hang it in a pan of water, heat it slowly and watch with a thermometer when it opens. A thermostat stuck open keeps the engine too cold, and one stuck shut makes it boil. Replace any hose that feels hard, cracked, or soft and swollen while you are at it.

Engine rebuild parts

For the engine there are piston ring sets, exhaust gaskets and MANN-FILTER fuel filters. After changing the fuel filter, bleed the fuel system, or the engine will start badly or stall after a few minutes. Before fitting new piston rings, check the end gap of each ring in its bore, then stagger the gaps around the piston. If they line up, the engine will blow by and burn oil.

Hydraulics, steering and clutch

The hydraulics are covered with single pumps and hydraulic pumps. Always check the direction of rotation, left or right, and compare the taper and flange with the old pump, since a pump turning the wrong way will not deliver and can be damaged quickly. For the steering there are ball joints and a bolt set for the steering valve, and for the clutch there are clutch plates. Starter motors and alternators cover the electrics. If the charge light glows faintly with the engine running, check the belt tension and the cables before replacing the alternator.

Around the tractor you will find silencers, pins and window rubbers for the cab. A new window rubber goes in far more easily if you warm it first in the sun or in warm water.

Matching the part to your 650

The 650 belongs to the Steyr Plus range. Check the type plate to confirm it really is a 650, and look for a reference number on the old part. For a clutch plate, count the splines and measure the diameter, and for a starter count the teeth on the pinion.

If you also run a Steyr 540, Steyr 545, Steyr 760 or Steyr 870, each has its own page with the parts that fit it. The other models from the brand are listed under Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart