Menu
EUR

Steyr 760 tractor parts & technical data

For the Steyr 760 of the Plus series this page gathers more than 80 matching parts, electrics among them, so you no longer have to guess.

88 parts found for Steyr 760
Show:
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17 mm, anticlockwise
Bosch/Rexroth
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€557,77 €460,97 €529,85 €437,89
You save 5%
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left
Bosch/Rexroth
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€675,40 €558,18 €641,60 €530,25
You save 5%
Pin Ø 18 x 91 mm Steyr 540-768, 8045-8075
Dimensions: Ø = 18, Length = 91 mm. More
Dimensions: Ø = 18, Length = 91 mm.
€14,10 €11,65
Temperature display mechanical water monitoring Ø 60 mm, 12 V, 40-120 °C
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 x 1.0, dimensions: Ø 60 mm, 12 V, temperature range: 40 - 120°C. More
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 ...
€80,69 €66,69 €76,65 €63,35
You save 5%
LUK Clutch plate 310UKF 28 x 35 mm, 10 splines Steyr 586 - 890
LUK
Dimensions (mm): 28 x 35 10 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 28 x 35 10 grooves | Material specifications: Organic...
€374,33 €309,36 €338,65 €279,88
You save 10%
Clutch plate 280 28 x 35 mm, 10 splines, organic, with torsion damping
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€215,50 €178,10 €204,70 €169,17
You save 5%
Clutch plate single clutch Steyr 430 Plus - 760 Plus
Additional information: Made in Germany More
Additional information: Made in Germany
€1.499,19 €1.239,00 €1.424,20 €1.177,02
You save 5%
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€290,88 €240,40 €181,80 €150,25
You save 38%
Ball joint 95 mm, M14 x 1,5, M20 x 1,5 L, taper 16,2 - 18,2 mm
A: 95 mm. C: M14 x 1,5 mm. D: M20 x 1,5 L mm. E: 16,2 mm. F: 18,2 mm. Taper: 16,2 - 18,2 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: M20 x 1,5 L mm. E: 16,2 mm. F: 18,2 mm. ...
€40,75 €33,68 €38,70 €31,98
You save 5%
Inlet valve for turbocharger motors, engine WD 308 - WD 611 Steyr
Connecting rod bearing standard Steyr engine WD 306 - WD 408
€55,10 €45,54 €52,30 €43,22
You save 5%
GRANIT Injection nozzle Steyr 540-768
GRANIT
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164. More
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164.
€47,11 €38,93 €44,75 €36,98
You save 5%
Joint spindle 190 mm, ball-Ø 28,5/34,25 mm, M30 x 3 Steyr
Dimensions: Length = 190, Ball Ø = 28.5/34.25, M30 x 3 mm. More
Dimensions: Length = 190, Ball Ø = 28.5/34.25, M30 x 3 mm.
€20,70 €17,11
GRANIT Drive shaft 2000 mm, 2x M18 x 1,5
GRANIT
Version: Thread: 2 x M18 x 1.5. More
Version: Thread: 2 x M18 x 1.5.
€47,31 €39,10 €44,90 €37,11
You save 5%
GRANIT Clutch plate 280 28 x 35 mm, 10 splines, hub both sides off
GRANIT
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€455,44 €376,40 €432,65 €357,56
You save 5%
LUK Single clutch 310DBFR 46 x 50 mm, 8 splines Steyr
LUK
Dimensions (mm): 46 x 50 8 grooves More
Dimensions (mm): 46 x 50 8 grooves
€713,10 €589,34 €677,40 €559,83
You save 5%
Brake lining 60 x 6 x 295 mm Steyr 288, 290, 650-768
€36,48 €30,15 €34,65 €28,64
You save 5%
KS Piston ring set 3 rings Ø 100 mm, 2,5 / 2,5 / 4 mm Steyr 540-760
KS
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm.
€51,59 €42,64 €49,00 €40,50
You save 5%
Repair set water pump shaft length 195 mm Steyr 40-768 Plus
Dimensions: Shaft length = 195 mm. More
Dimensions: Shaft length = 195 mm.
€80,85 €66,82
GRANIT Piston ring set 3 rings Ø 100 mm, 2,5 mm / 2,5 mm / 4 mm Steyr
GRANIT
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm.
€40,74 €33,67 €38,70 €31,98
You save 5%
GRANIT Lifting spindle right 420 - 520 mm, Ø 24,5 mm Steyr
GRANIT
Dimensions: Length = 420 - 520, Clevis inside = 40, Clevis outside = 71, Ø = 24.5 mm. Ø: 24,5 mm. Length: 420 - 520 mm. More
Dimensions: Length = 420 - 520, Clevis inside = 40, Clevis outside = 7...
€215,86 €178,40 €205,00 €169,42
You save 5%
GRANIT Hydraulic pump 16 + 8 cm³, taper 1:5, Ø 17 x 17 Steyr 320, 760 Plus
GRANIT
Output volume (cc/rev): 16 + 8 | Drive shaft: Taper 1:5, Ø 17 x 17 More
Output volume (cc/rev): 16 + 8 | Drive shaft: Taper 1:5, Ø 17 x 17
€792,48 €654,94 €717,00 €592,56
You save 10%
Showing 25 - 48 of 88

Steyr 760 parts for engine overhaul, hydraulics and clutch

The Steyr 760 from the Plus range is the kind of tractor people keep for decades, provided the wear parts are replaced in time. This page brings together more than 80 parts that fit the 760, from GRANIT, Bosch/Rexroth, MAHLE, LUK and GRAMMER.

Clutch and engine

When the drive clutch slips, you will find clutch plates and a thrust bearing here. A good habit when the tractor is split anyway: replace the thrust bearing together with the plate. A bearing that still turns quietly but has some play rarely lasts long, and splitting the tractor twice costs far more than the bearing. Check the flywheel face as well, since scoring or blue heat marks mean it needs machining before the new plate goes in.

For an engine that burns oil or smokes blue, MAHLE piston ring sets are available for a rebuild. The cooling system is covered with a thermostat and radiator hoses, and the exhaust with a vertical silencer and gasket.

Hydraulics, electrics and cab

Hydraulic pumps, including single pumps from Bosch/Rexroth, keep the linkage and steering working. Always match the direction of rotation and the shaft taper, because a left hand pump will not deliver oil where a right hand one belongs. A bolt set for the control valve is also listed. For the electrics there is a starter motor and an alternator, and new window rubber keeps the cab dry. Ball joints and pins take the slack out of the steering and the linkage.

Finding the right part for your 760

Check the serial plate first to confirm you are working on a Steyr 760. The old part is the next best source: pumps, starters and alternators usually carry a reference number you can compare with the new part. On a clutch plate, count the splines and measure the hub bore.

If you fit new piston rings yourself, stagger the ring gaps around the piston so they do not line up, and install each ring with its marking facing up. Check the end gap of every ring in its bore first. During the first hours, vary the load rather than letting the engine idle for long, so the rings bed in properly.

Related Steyr models

Other tractors from the same range have their own pages with the parts that fit them:

The full selection for the brand is under Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart