Menu
EUR

Steyr 9085 MT tractor parts & technical data

Keeping a Steyr 9085 MT from the 9000 MT series in good order? The more than 190 parts on this page include trailer couplings, lighting and electrics.

189 parts found for Steyr 9085 MT
Show:
Push button switch PTO shaft on-off Case IH, New Holland, Steyr
Version: PTO (PTO shaft switch) on/off, push button, external switch (on mudguard) More
Version: PTO (PTO shaft switch) on/off, push button, external switch (...
€39,17 €32,37 €36,04 €29,78
You save 8%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung front axle Additional control units Reversing system Front PTO More
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage...
€96,68 €79,90 €88,95 €73,51
You save 8%
MAHLE Air conditioning compressor 12 V, R 134a, pulley-Ø 152 mm, 2 grooves, Rotolock
MAHLE
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quantity (ccm): 285 | Pulley Ø (mm): 152 | No. of grooves: 2 | Connection: Rotolock... More
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quan...
€681,82 €563,49 €408,38 €337,50
You save 40%
FEBI Engine oil filter Ø 108 mm, height 144,2 mm, thread M24 x 1,5
€34,35 €28,39 €14,07 €11,63
You save 59%
Axial joint 180 mm, M20 x 1,5 / M18 x 1,5, 32 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€43,18 €35,69 €39,73 €32,83
You save 8%
Axial joint 180 mm, M20 x 1,5, M18 x 1,5, 32°
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€76,07 €62,87 €69,98 €57,84
You save 8%
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M20. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pat...
€629,86 €520,55
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
Threaded spindle top link M24 x 3,0, 157 mm, category 2 IHC, Steyr
Category: 2 | B (mm): 90 | I (mm): M24 x 3,0 | G (mm): 157 | C (mm): 32 | A (mm): 28,4 More
Category: 2 | B (mm): 90 | I (mm): M24 x 3,0 | G (mm): 157 | C (mm): 3...
€52,17 €43,11
ZF Lining plate Hi-Lo Ø 144,5 x 102 mm, thickness 2,9 mm Case IH, Steyr
ZF
Außen-Ø (mm): 144,5 Stärke: 2,9 Innen-Ø: 102 | Reference no.: 0501.324.543 More
Außen-Ø (mm): 144,5 Stärke: 2,9 Innen-Ø: 102 | Reference no.: 0501...
€45,77 €37,83 €42,11 €34,80
You save 8%
Multifunction switch, cable with open ends
Version: For indicators, lights, horn, windscreen wipers Connection cable with open ends More
Version: For indicators, lights, horn, windscreen wipers Connection ca...
€549,07 €453,78 €505,14 €417,47
You save 8%
Rocker switch dashboard front work light
Version: Dashboard Control panel Front headlights More
Version: Dashboard Control panel Front headlights
€97,70 €80,74 €89,88 €74,28
You save 8%
Starter switch 12 / 24 V, 6 blade terminals, M26 x 1,5, 2 keys
Version: Operating voltage: 12 V / 24 V With 6 blade terminals (6.3 x 0.8 / 9.5 x 1.2 mm) Locking cylinder with protection against water 2 keys (type ... More
Version: Operating voltage: 12 V / 24 V With 6 blade terminals (6.3 x ...
€73,07 €60,39 €67,22 €55,56
You save 8%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
You save 8%
Valve seat outlet valve engine Sisu 320, 420, 620
€75,91 €62,74 €69,84 €57,72
You save 8%
Reman turbocharger Valtra-Valmet, Steyr, Case IH
€1.024,99 €847,10 €982,26 €811,79
You save 4%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Scharmüller Manual hitch W255 S32 K1, coupling pin 31 mm, 2000 kg, 92 kN
Scharmüller
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€732,74 €605,57
Hand brake switch mechanical M12, 12 V / 24 V, blade connection
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal connection. More
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal conn...
€20,80 €17,19
Stabilus Gas strut door 300 N, 315 mm, stroke 108 mm Case IH, Steyr
Stabilus
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm): 8 | B (mm): 165 | d2 (mm): 19 | To fit: Door | Stroke (mm): 108 More
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm)...
€138,26 €114,26 €127,20 €105,12
You save 8%
Ball joint 173 mm, M18 x 1,5, taper 19,9 - 22,3 mm
A: 173 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. Taper: 19,9 - 22,3 mm. More
A: 173 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. T...
€68,26 €56,41 €62,80 €51,90
You save 8%
Master brake cylinder Case IH, Steyr, New Holland
Reference no.: 133135155, 133135418. More
Reference no.: 133135155, 133135418.
€140,19 €115,86 €128,97 €106,59
You save 8%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
Scharmüller Drawbar ball 50, rail 325 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 160 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.022,10 €844,71 €872,96 €721,45
You save 15%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€47,55 €39,30 €43,75 €36,15
You save 8%
External plate four-wheel drive 2 mm, inner 95 mm, outer 147 mm
Version: Thickness: 2 mm Inner: 95 mm Outer: 147 mm More
Version: Thickness: 2 mm Inner: 95 mm Outer: 147 mm
€51,87 €42,87 €47,72 €39,44
You save 8%
Rocker switch dashboard engine speed, differential for
Version: Dashboard Control panel Instrument panel Cab roof Engine speed reduction Front linkage Front differential Heater, ventilation and air conditi... More
Version: Dashboard Control panel Instrument panel Cab roof Engine spee...
€51,40 €42,48 €47,29 €39,08
You save 8%
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Additional information: Dust-tight, with fan, with W con... More
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (m...
€209,77 €173,36 €192,99 €159,49
You save 8%
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€37,68 €31,14 €34,67 €28,65
You save 8%
Hand brake cable right 1620 mm, M10 Case IH, Steyr
Length: 1620 mm. Thread: M10. Dimensions: Length = 1620 mm, Thread M10. More
Length: 1620 mm. Thread: M10. Dimensions: Length = 1620 mm, Thread M10...
€64,90 €53,64 €59,71 €49,35
You save 8%
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Gas strut rear window 200 N, 490 mm, ball socket 8 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form: 2. Menke no.: 54800. More
Newtons: 200. A: 490 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear scr...
€33,16 €27,41 €30,51 €25,21
You save 8%
Spring left fender Case IH, New Holland, Steyr
€51,26 €42,36 €47,16 €38,97
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
You save 21%
HELLA Work lamp flood beam H9, 12 V, 65 W, square, upright
HELLA
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Power consumption: 65 W. Light function: Close-range illumination. Bulbs included:... More
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Po...
€68,06 €56,25 €65,54 €54,16
You save 4%
Ball joint with axial joint 315 mm, M18 x 1,5, taper 19,9 - 22,25 mm
€126,20 €104,30 €116,10 €95,95
You save 8%
Brake disc Ø 241 mm, thickness 5 mm, 28 teeth
€51,29 €42,39 €47,19 €39,00
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm. More
Dimensions: M12 x 140 mm.
€15,23 €12,58
Exhaust gasket of turbocharger up to exhaust Sisu 420 D Steyr, Case IH
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€105,23 €86,97 €96,81 €80,01
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€676,60 €559,17
Showing 49 - 96 of 189

Steyr 9085 MT parts for lighting, the cab and hitching

Autumn and winter mean plenty of work in the dark on a Steyr 9085 MT, which is when reliable lighting earns its keep. This page holds more than 190 replacement parts that fit the 9085 MT, from GRANIT, Scharmüller, Walterscheid, HELLA, Cobo and others.

Choosing work lamps

Work lamps come with different beam patterns. A spotlight throws light far but narrow, while a flood beam spreads a wide pool of light close to the tractor. For work with an implement behind the tractor, a flood beam is usually the more comfortable choice, and there is one available here. You will also find indicator and position lights, plus rocker switches for the dash, such as the switch for the front work lights.

Cab and engine

If the cab door no longer latches properly, check whether the lock itself is worn or the striker plate has simply moved. Loosening and realigning the striker often solves it without a new lock. If the lock is worn out, a replacement door lock is available.

  • Gas struts for windows and the bonnet
  • A tank cap
  • An alternator
  • Gaskets, among them the water pump gasket, and O-rings
  • Springs

Hitching

At the rear there are drawbars, a Piton Fix, a top drawbar and an automatic hitch. A height adjustable adapter plate lets you set the drawbar at the right height for the trailer.

Making sure it fits

The type plate confirms that the tractor is a 9085 MT. The safest check is the reference number on the old part, compared with the details shown for the item.

Gas struts and the alternator

Where possible, fit a gas strut with the piston rod pointing down. That keeps the seal inside the cylinder lubricated and the strut lasts longer. Struts that work as a pair should always be replaced together. When you change the alternator, check the drive belt at the same time and make sure the charging cable on the alternator is properly tightened, since a loose cable causes the same symptoms as a failing unit.

An indicator or position light that flashes weakly or irregularly usually points to a poor earth in the lamp or its holder. Clean that contact before replacing the light. On the automatic hitch, blow out the mechanism after dusty work and lubricate it lightly so the pin drops in cleanly.

Within the 9000 MT series

The Steyr 9105 MT from the same series has its own page with the parts that fit it. Other Steyr tractors, with their own sets of parts, are reached through Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart