Menu
EUR

Steyr 9125 tractor parts & technical data

Need parts for a Steyr 9125 from the 9100 series? Choose from more than 300 items, such as trailer couplings, lighting, and steering and front axle parts.

331 parts found for Steyr 9125
Show:
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
16%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.108,13 €915,81 €933,36 €771,37
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
12%
Scharmüller
Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 ...
€704,78 €582,46 €623,25 €515,08
 
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
12%
Scharmüller
Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 ...
€1.195,30 €987,85 €1.057,10 €873,64
 
Plate spring main connection Case IH CS 110 - 150, Steyr 9105 - 9145
5%
Plate spring main connection Case IH CS 110 - 150, Steyr 9105 - 9145
€117,27 €96,92 €111,40 €92,07
 
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
5%
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines
€89,03 €73,58 €84,55 €69,88
 
GRANIT Hydraulic pump 36 cm³/rpm. Case IH CS 100 - 150, Steyr 9105 - 9145
10%
GRANIT
Hydraulic pump 36 cm³/rpm. Case IH CS 100 - 150, Steyr 9105 - 9145
Output volume (cc/rev): 36
€1.071,66 €885,67 €969,55 €801,28
 
GRANIT Pin lower arm Carraro front axle 145706 Case IH, Renault, Steyr
5%
GRANIT
Pin lower arm Carraro front axle 145706 Case IH, Renault, Steyr
€535,84 €442,84 €509,00 €420,66
 
Thrust washer Case IH, Renault, Steyr
5%
Thrust washer Case IH, Renault, Steyr
€66,79 €55,20 €63,45 €52,44
 
Elbow lower arm Carraro front axle 145
5%
Elbow lower arm Carraro front axle 145
€178,23 €147,30 €169,30 €139,92
 
GRANIT Potentiometer Carraro front axle 145109
5%
GRANIT
Potentiometer Carraro front axle 145109
€246,96 €204,10 €234,60 €193,88
 
GRANIT Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
5%
GRANIT
Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm.
€92,00 €76,03 €87,40 €72,23
 
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Support plates ball 80, 1142 x 240 mm, 4000 kg
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width:...
€2.220,60 €1.835,21
 
GRANIT Stop solenoid switch Case IH, Steyr
5%
GRANIT
Stop solenoid switch Case IH, Steyr
€493,46 €407,82 €468,75 €387,40
 
Radiator cap Ø 58 mm, height 25 mm, 0,7 bar
Radiator cap Ø 58 mm, height 25 mm, 0,7 bar
Neck Ø: 58 mm. Height: 25 mm. Opening pressure: 0,7 bar.
€9,45 €7,81
 
GRANIT Tension spring engine brake Case IH, Steyr
GRANIT
Tension spring engine brake Case IH, Steyr
Description: For engine brake.
€8,30 €6,86
 
Gas strut hood 500 N, 585 mm Case IH, Steyr
5%
Gas strut hood 500 N, 585 mm Case IH, Steyr
Newtons: 500. A: 585 mm. B: 290 mm. C: 8 mm. D: 8 mm. To fit: bonnet. Form: 2.
€59,87 €49,48 €56,85 €46,98
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
12%
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
HELLA Rear light right hole spacing 110 mm, 12 V
23%
HELLA
Rear light right hole spacing 110 mm, 12 V
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 ...
€95,00 €78,51 €72,75 €60,12
 
Showing 73 - 96 of 331

Steyr 9125 parts from belt drive to drawbar

There are more than 300 Steyr 9125 parts on this page, made by GRANIT and by brands such as Scharmüller, HELLA, MAHLE and GRAMMER. They run from the belts at the front of the engine to the hitch at the back.

The 9125 often works with heavy trailers and front loaders. That puts extra strain on the steering, the linkage and the electrical controls, which is where many of the parts on this page come in.

Engine front and charging

V-belts, including one for the air conditioning, and alternators with a fixed flange and pulley sit at the front of the engine. There is a gasket for the water pump and a seal for the fuel feed pump. A V-belt that squeals when you pull away or switch on the aircon is usually too slack or glazed on its flanks. Fit a new one, then check the tension again after a few hours of work, because a fresh belt stretches a little at first.

Hitch, steering and seals

For the rear there are drawbars with a K80 ball on a rail and adapter plates. Ball joints and bushes cover the steering and linkage, while O-rings and sealing rings keep oil and coolant where they belong, for example a sealing ring that is used on Case IH and Steyr tractors.

Switches, lights and cab

The cab of the 9125 has plenty of switches that wear over time. You will find push buttons, such as the yellow one for lifting and lowering, and rocker switches in the dashboard, for instance for the front work lights. Work lamps are here too, among them a corner light with a flood beam. A tractor seat and gas struts for the hood complete the list. If a switch only works when you press harder, check the connector behind it before replacing the switch. Contact spray often does the job.

Making sure it fits

Check the type plate to confirm the machine is a 9125. If you still have the old part, look for a reference number on it. With gaskets and sealing rings that look alike, that number is often the only reliable way to tell them apart. Within the Steyr range, the 9125 is part of the 9100 line. The other types in that series each have their own page: Steyr 9105, Steyr 9115 and Steyr 9145. To browse every tractor of the make, go to Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart