Menu
EUR

Steyr 9145 tractor parts & technical data

Does your Steyr 9145 need a new part? Browse more than 300 items for this 9100 series model, such as trailer couplings, lighting and steering components.

329 parts found for Steyr 9145
Show:
Brake disc Ø 223 mm, 28 teeth, thickness 4,5 mm Steyr, Case IH
Dimensions: 28 splines, Outer Ø 223, Inner Ø 60 mm. More
Dimensions: 28 splines, Outer Ø 223, Inner Ø 60 mm.
€94,38 €78,00 €86,83 €71,76
You save 8%
Starter ring gear Ø 390/360 mm, 128 teeth Case IH, Steyr, New Holland
Version: Ø 390/360 mm, 128 teeth. More
Version: Ø 390/360 mm, 128 teeth.
€150,52 €124,40 €138,48 €114,45
You save 8%
Dayco V-belt air brake system 13 mm, 1450 mm
Dayco
Width: 13 mm. Length: 1450 mm. More
Width: 13 mm. Length: 1450 mm.
€27,35 €22,60
Front cover gasket Case IH, New Holland, Steyr
€113,79 €94,04 €104,69 €86,52
You save 8%
MANN-FILTER Filter set engine oil, fuel, air, transmission, hydraulics
MANN-FILTER
To fit: Steyr. To fit type: 9105, 9115, 9125, 9145. Set consisting of: Engine oil filter, Main fuel filter, Air filter, Secondary element, Transmissio... More
To fit: Steyr. To fit type: 9105, 9115, 9125, 9145. Set consisting of:...
€295,77 €244,44 €177,14 €146,40
You save 40%
Flame glow plug 12 V, 12,5 A, thread 7/8" - 3/8" UNF Steyr, Case IH
Version: 12 V, 12.5 A, thread 7/8" - 3/8" UNF. More
Version: 12 V, 12.5 A, thread 7/8" - 3/8" UNF.
€34,71 €28,69 €31,93 €26,39
You save 8%
Stop solenoid switch Case IH, Steyr
€514,93 €425,56 €473,74 €391,52
You save 8%
Piston set complete 3 rings, Ø 108 mm, piston pin Ø 40 x 88,70 mm
Dimensions: 3 rings, Ø 108 mm, Gudgeon pin Ø 40 x 88.70 mm, Combustion chamber Ø 64.50 mm, Combustion chamber depth 19 mm. More
Dimensions: 3 rings, Ø 108 mm, Gudgeon pin Ø 40 x 88.70 mm, Combusti...
€216,10 €178,60 €198,81 €164,31
You save 8%
Radiator hose, top Ø 40 / 45 mm Case IH, Steyr
Inner Ø: 40 / 45 mm. More
Inner Ø: 40 / 45 mm.
€131,68 €108,83 €121,15 €100,12
You save 8%
Water pump gasket engine Sisu 620 Case IH, Steyr
€40,59 €33,55 €37,34 €30,86
You save 8%
Tank cap bayonet connection with ventilation, tank collar Ø 83 mm
€81,95 €67,73 €75,39 €62,31
You save 8%
Tube 900 mm, inner-Ø 58 mm, outer-Ø 75 mm Case IH, Steyr
Version: Inner Ø: 58 mm, Outer Ø: 75 mm, Length: 900 mm. Outer Ø: 75 mm. Inner Ø: 58 mm. Length: 900 mm. More
Version: Inner Ø: 58 mm, Outer Ø: 75 mm, Length: 900 mm. Outer Ø: 7...
€322,82 €266,79 €296,99 €245,45
You save 8%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm. More
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€103,56 €85,59 €95,28 €78,74
You save 8%
Cylinder head gasket engine Sisu
€82,88 €68,50 €76,25 €63,02
You save 8%
Foot throttle cable A 1170 mm, B 995 mm Case IH, Steyr
A: 1170 mm. B: 995 mm. More
A: 1170 mm. B: 995 mm.
€59,34 €49,04 €54,59 €45,12
You save 8%
Tank cap without ventilation, tank collar Ø 80 mm
Filler neck Ø: 80 mm. More
Filler neck Ø: 80 mm.
€51,26 €42,36 €47,16 €38,97
You save 8%
Adjustment pin stabilizer Case IH, Steyr
€93,93 €77,63 €86,42 €71,42
You save 8%
Plate three-point parts Ø 28 mm Massey Ferguson, Steyr
Dimensions: Ø 28 mm. More
Dimensions: Ø 28 mm.
€20,90 €17,27
Replacement glass, main mirror 308 x 176 x 3 mm, heated, right / left
Dimensions: 308 x 176 x 3 mm. Version: Heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. To fit: MAN / VW G (6-9t). ... More
Dimensions: 308 x 176 x 3 mm. Version: Heated. Installation location: ...
€72,35 €59,79 €66,56 €55,01
You save 8%
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 148 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€899,63 €743,50 €871,22 €720,02
You save 3%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€839,65 €693,93 €812,85 €671,77
You save 3%
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right. More
Length min./max.: 500 - 800 mm. Installation location: right.
€259,22 €214,23 €238,48 €197,09
You save 8%
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecti...
€1.147,51 €948,35
Rotation angle sensor transmission clutch operation servo motor
Version: Function: clutch operation, Rotation angle sensor, reversible PTO shaft (servomotor). More
Version: Function: clutch operation, Rotation angle sensor, reversible...
€499,25 €412,60 €459,31 €379,60
You save 8%
Push button switch hydraulics lift / lower, button green
Version: Green button, lift/lower, 4 blade terminals. More
Version: Green button, lift/lower, 4 blade terminals.
€33,50 €27,69 €30,82 €25,47
You save 8%
Cobo Work lamp H3 left 55 / 70 W, 158 x 96 x 85 mm, 12/24 V
Cobo
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Installation location: Left. Nominal voltage: 12 / 24 V. Power consumption: 55 / ... More
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. I...
€110,99 €91,73 €102,11 €84,39
You save 8%
HELLA Rear light right hole spacing 110 mm, 12 V
HELLA
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 mm. Form: Rectangular. Height: 140 mm. Hole spacing: 110 mm. Housing: ... More
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. W...
€94,42 €78,03 €72,75 €60,13
You save 23%
Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm...
€229,33 €189,53 €210,98 €174,37
You save 8%
Alternator 14 V / 95 A, form B, flange 51,2 mm, pulley-Ø 67,2 mm
To fit as: Steyr 9080 M, 9090 M, 9100 M More
To fit as: Steyr 9080 M, 9090 M, 9100 M
€179,98 €148,74 €165,58 €136,84
You save 8%
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longitudinal adjustment. Backrest tilt adjustment. Lumbar support. Adjustabl... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€1.295,09 €1.070,32
Hand brake cable 460 mm Case IH CS 100-150, Steyr 9105-9145
Length: 460 mm. Dimensions: Length = 460 mm. More
Length: 460 mm. Dimensions: Length = 460 mm.
€90,40 €74,71 €83,17 €68,73
You save 8%
Seal PTO shaft end piece 94 x 118 x 12 mm
Version: 94 x 118 x 12 mm. More
Version: 94 x 118 x 12 mm.
€105,38 €87,09 €96,95 €80,12
You save 8%
Gasket exhaust Case IH, Steyr
€44,98 €37,17 €41,38 €34,20
You save 8%
Radiator hose, bottom Ø 45 / 55 mm Case IH, Steyr
Inner Ø: 45 / 55 mm. More
Inner Ø: 45 / 55 mm.
€67,07 €55,43 €61,70 €51,00
You save 8%
Showing 241 - 288 of 329

Steyr 9145 parts

Ask anyone who spends long days on a Steyr 9145 what wears out first and the seat is high on the list. Air suspended GRAMMER tractor seats are one of the things you can find here, alongside more than 300 other Steyr 9145 parts from GRANIT, Scharmüller, HELLA, MAHLE and GRAMMER.

A quick tour of the parts

Under the hood: a water pump gasket, a feed pump seal, O-rings and sealing rings, plus alternators and V-belts, including the air conditioning belt.

In the cab: push button switches for lifting and lowering the hydraulics, rocker switches for the front work lights, and tractor seats.

Outside: work lamps such as a corner light with a flood beam, gas struts for the hood, ball joints for the steering, and drawbars, automatic hitches and adapter plates at the rear.

Three jobs worth doing properly

Gas struts on the hood should always be replaced as a pair. One new strut working against an old one twists the hood and wears out faster. Before you fit them, check the force and length printed on the old cylinders.

A weeping feed pump seal is easy to ignore, but it can let air into the fuel system. The result is hard starting after the tractor has stood for a while, and a lot of time spent bleeding the system. A new seal is a quick fix.

Steering ball joints are best checked with two people. One rocks the steering wheel back and forth, the other holds a hand on each joint and feels for a knock. Any play you can feel there will only get worse under a loaded front linkage.

Rocker switches usually give warning before they fail. One that needs a firm push to switch is on its way out, so replace it before the front work lights go dark in the middle of a night shift.

Before ordering, a quick look at the type plate confirms that the machine in your yard is a 9145. For the part itself, the quickest route is the reference number stamped or printed on the old component, which you can match against the items on this page. If the old part is too worn to read, compare its shape and connections with the product photos.

Other tractors in the Steyr 9100 series

The 9145 shares the 9100 series with the Steyr 9105, the Steyr 9115 and the Steyr 9125. Each has its own page, so you can see exactly which parts are listed for each tractor in your yard. Other Steyr tractors each have their own page, all listed under Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart