Menu
EUR

Steyr CVT 130 tractor parts & technical data

Steyr CVT 130 parts, more than 200 of them, are listed on this page. Trailer couplings, lighting and electrics are matched to this CVT series tractor.

194 parts found for Steyr CVT 130
Show:
Wabco Antifreeze pump 13 bar, 0,2 cm³, without control connection 4
Wabco
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 bar. Delivery volume: 0.2 cm³. Contents: 500 ml. Version: • Prevents equipment... More
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 b...
€288,66 €238,56 €274,20 €226,61
You save 5%
GRANIT Master brake cylinder Case IH, Steyr, New Holland
GRANIT
Reference no.: 133135155, 133135418. More
Reference no.: 133135155, 133135418.
€134,35 €111,03 €127,60 €105,45
You save 5%
Scharmüller Drawbar bracket 200 x 120 mm, bore M16, inner width 124 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M16 mm. Colour: Black. Internal width: 124 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M16 mm. Colour: Black. Internal widt...
€287,01 €237,20 €253,80 €209,75
You save 12%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
You save 5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
GRANIT Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
GRANIT
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm...
€230,76 €190,71 €208,75 €172,52
You save 10%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€119,54 €98,79 €113,55 €93,84
You save 5%
GRANIT Bush lower arms Case IH, New Holland, Steyr
€34,67 €28,65 €32,90 €27,19
You save 5%
Return line Case IH, Steyr
€531,07 €438,90 €504,50 €416,94
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€889,04 €734,74 €748,81 €618,85
You save 16%
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecti...
€1.195,30 €987,85 €1.057,10 €873,64
You save 12%
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines More
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines
€89,03 €73,58 €84,55 €69,88
You save 5%
Thrust washer Case IH, Renault, Steyr
€66,79 €55,20 €63,45 €52,44
You save 5%
GRANIT Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
GRANIT
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø...
€92,00 €76,03 €87,40 €72,23
You save 5%
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.220,60 €1.835,21
GRANIT Tension spring engine brake Case IH, Steyr
GRANIT
Description: For engine brake. More
Description: For engine brake.
€8,30 €6,86
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
GRANIT Pressure switch gear insertion, hydraulic filter
GRANIT
Version: Gear insertion, hydraulic filter. More
Version: Gear insertion, hydraulic filter.
€504,20 €416,69
Showing 25 - 48 of 194

Steyr CVT 130 parts

Seeping seals, an electrical fault on the dashboard and a worn hitch are the typical jobs on a hard working Steyr CVT 130. This page brings together more than 200 replacement parts for the tractor, from suppliers including GRANIT, Scharmüller, GRAMMER, HELLA and Walterscheid.

Switches on the CVT 130

If the front work lights have stopped working, the rocker switch on the dashboard is a likely suspect. Contact switches and pressure switches are listed too. When a pressure switch reports a fault while the pressure is fine, check the plug and wiring first, since the problem is often there rather than in the switch.

Hitching, cab, seals and choosing parts

For the rear there are drawbars, automatic hitches, a top drawbar and the Piton Fix system, plus a height adjustable adapter plate for setting the coupling at the right level. Inside, an air suspended GRAMMER seat makes long days easier, and gas struts keep doors and windows where they should be.

On the Piton Fix and the automatic hitch, look at the locking pin and the jaw regularly. A pin with a worn edge or a jaw with play causes knocks when pulling away. When a gas strut can no longer hold a door or window, fit the new one with the rod facing down.

A water pump gasket, O-rings for the feed pump, sealing rings and a seal for the lubrication line cover the usual leak points, and repair kits are available as well for renewing several seals in one go. Never reuse an old O-ring. Clean the groove, give the new ring a light coat of clean oil and make sure it does not twist as it goes in.

The identification plate confirms that you are working on a CVT 130. For switches, compare the symbol and the number of terminals. For O-rings and sealing rings, use the size marked on the old one or measure it. A reference number on the removed part is always a reliable way to check against the product information. For drawbars and hitches, measure the rail width and coupling pin diameter as well.

Other CVT tractors

These related models each have a page of their own, which helps if you run more than one Steyr:

The 6185 CVT and 6230 CVT are part of the same line. For every other model from the brand, visit Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart