Menu
EUR

Steyr CVT 170 tractor parts & technical data

This page holds more than 200 parts for the Steyr CVT 170 from the CVT series, such as trailer couplings, steering and front axle parts and lighting.

202 parts found for Steyr CVT 170
Show:
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable...
€1.079,85 €892,44
 
Scharmüller Drawbar 640 mm, 90 x 50 mm, pin 31,5 mm, 78,5 kN, position 1
Scharmüller
Drawbar 640 mm, 90 x 50 mm, pin 31,5 mm, 78,5 kN, position 1
Category: Drawbar | Pin Ø (mm): 31,5 | D-value (kN): 78,5 | Version: Standard | ...
€377,90 €312,31
 
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
16%
Scharmüller
Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.390,39 €1.149,08 €1.171,10 €967,85
 
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, without bracket
23%
HELLA
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, without bracket
Version: Power rating: 12 V / 2 + 1 +1 x 21 W / 8 x 21 W, With hazard warning fu...
€73,86 €61,04 €56,55 €46,74
 
GRANIT Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
GRANIT
Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
Version: Function: engine and PTO shaft speed (front), M18 x 1.5 mm, Connection ...
€353,30 €291,98
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.228,70 €1.015,45
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
5%
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
€74,31 €61,41 €70,55 €58,31
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
Passenger seat plastic black
Passenger seat plastic black
To fit: New Holland. Colour: Schwarz. Upholstery type: Plastic, black.
€334,45 €276,41
 
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
23%
ROCKINGER
Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini...
€1.387,39 €1.146,60 €1.062,30 €877,93
 
Position sensor linkage for lower link shaft
5%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
 
Mirror unheated 318 x 186 mm, rod Ø 14 - 20 mm
10%
Mirror unheated 318 x 186 mm, rod Ø 14 - 20 mm
Tractor type: Steyr Cabine SK2, 9105, 9115, 9125, 9145, CVT 120, 130, 150, 170, ...
€46,18 €38,17 €41,75 €34,50
 
SACHS Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
5%
SACHS
Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation location: ...
€166,42 €137,54 €158,00 €130,58
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. o...
€595,38 €492,05 €565,60 €467,44
 
Scharmüller Drawbar bracket 200 x 120 mm, bore M16, inner width 124 mm, black
12%
Scharmüller
Drawbar bracket 200 x 120 mm, bore M16, inner width 124 mm, black
Hole pattern: 200 x 120 mm. Hole: M16 mm. Colour: Black. Internal width: 124 mm....
€287,01 €237,20 €253,80 €209,75
 
Gasket exhaust Case IH, Steyr
5%
Gasket exhaust Case IH, Steyr
€43,10 €35,62 €40,90 €33,80
 
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Co...
€27,00 €22,31
 
Showing 1 - 24 of 202

Steyr CVT 170 parts for the hitch, the cab and the engine

A CVT 170 piles on hours, and hours mean wear in the same few places: the hitch, the seat and switches that get pressed thousands of times. This page holds more than 200 parts for this Steyr, from GRANIT, Scharmüller, GRAMMER, HELLA and Walterscheid.

Hitching up

For the rear there are drawbars, top drawbars, Piton Fix hooks, automatic hitches, loose pins and adapter plates for the hitch rail. An adapter plate makes it easy to change systems, for example from an automatic hitch to a piton for a heavy trailer.

A tip for the automatic hitch: grease the coupling pin and the jaw regularly, and after every hook-up check that the pin has dropped all the way. A pin that hangs halfway because of dirt or rust is a classic start to trouble on the road. A quick hose-down after a day in the mud saves a lot of that.

Seat and switches in the cab

For the cab there are tractor seats, including an air suspended GRAMMER seat, and gas struts for windows and hatches. The dashboard carries rocker switches, for instance for the front work lights, and contact switches and pressure switches are on offer too. If a lamp stays dark, check the fuse and the bulb before replacing the switch. If the switch no longer clicks or feels loose, it is the culprit itself.

When an air suspended seat slowly sinks or no longer rises to height, the cause is often the air bag, the valve or the compressor connection. Check those points before replacing the whole seat. If the base is worn out or the cover torn, a new seat is usually the simplest answer.

Engine seals

For the engine there is a water pump gasket for the Sisu unit, an O-ring for the feed pump, sealing rings and seals, including one for the lubrication line.

The right part for your CVT 170

Type and chassis number are on the type plate. That number helps when the equipment differs within the CVT 170, for example in the cab or the hitch system. For seals the number on the old part is often even clearer.

Steyr's CVT family is a big one. If you have several of its tractors, each type has its own page, such as the Steyr 6145 CVT, Steyr 6150 CVT, Steyr 6165 CVT, Steyr 6175 CVT, Steyr 6195 CVT and Steyr 6240 CVT. Pick the parts for that tractor there. For the remaining Steyr ranges, start from the brand overview at Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart