Menu
EUR

Steyr CVT 170 tractor parts & technical data

This page holds more than 200 parts for the Steyr CVT 170 from the CVT series, such as trailer couplings, steering and front axle parts and lighting.

202 parts found for Steyr CVT 170
Show:
Pressure sensor 50 bar, thread M12 x 1,5, transmission hydraulic plate
Version: Function: gear insertion - hydraulic plate, Thread: M12 x 1.5, Pressure: 50 bar. More
Version: Function: gear insertion - hydraulic plate, Thread: M12 x 1.5...
€922,92 €762,74 €876,75 €724,59
You save 5%
Cobo Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
Cobo
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90 F/S, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4, 47, ... More
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90...
€35,65 €29,46
Internal plate front axle wheel hub Ø 215 x 36,5 mm, 10 mm, 13 teeth
Number of teeth: 13 | Outer Ø (mm): 215 | Inner Ø (mm): 36,5 | Thickness (mm): 10 More
Number of teeth: 13 | Outer Ø (mm): 215 | Inner Ø (mm): 36,5 | Thick...
€132,01 €109,10 €125,40 €103,64
You save 5%
GRANIT Pressure switch 1 bar transmission filter Case IH, New Holland, Steyr
GRANIT
Version: 1 bar, transmission filter contamination indicator More
Version: 1 bar, transmission filter contamination indicator
€218,25 €180,37
Radiator hose by-pass inner-Ø 17 / 22 / 22 mm Steyr CVT 120-170
Inner Ø: 17 / 22 / 22 mm. More
Inner Ø: 17 / 22 / 22 mm.
€71,52 €59,11 €67,90 €56,12
You save 5%
GRANIT O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
GRANIT
Dimensions: All rings 115 x 3.5 mm. More
Dimensions: All rings 115 x 3.5 mm.
€33,54 €27,72 €31,85 €26,32
You save 5%
GRANIT Hydraulic pump 30 / 35 cm³/rpm. Case IH, Steyr
GRANIT
Output volume: 30/ 35 cc/rev. More
Output volume: 30/ 35 cc/rev.
€5.431,75 €4.489,05
Plate three-point parts Ø 28 mm Massey Ferguson, Steyr
Dimensions: Ø 28 mm. More
Dimensions: Ø 28 mm.
€20,00 €16,53
Pin 28 x 95 mm Steyr Series 6135 CVT - 9145, CVT 120-170
Dimensions: 28 x 95 mm. More
Dimensions: 28 x 95 mm.
€68,00 €56,20 €64,60 €53,39
You save 5%
Showing 193 - 202 of 202

Steyr CVT 170 parts for the hitch, the cab and the engine

A CVT 170 piles on hours, and hours mean wear in the same few places: the hitch, the seat and switches that get pressed thousands of times. This page holds more than 200 parts for this Steyr, from GRANIT, Scharmüller, GRAMMER, HELLA and Walterscheid.

Hitching up

For the rear there are drawbars, top drawbars, Piton Fix hooks, automatic hitches, loose pins and adapter plates for the hitch rail. An adapter plate makes it easy to change systems, for example from an automatic hitch to a piton for a heavy trailer.

A tip for the automatic hitch: grease the coupling pin and the jaw regularly, and after every hook-up check that the pin has dropped all the way. A pin that hangs halfway because of dirt or rust is a classic start to trouble on the road. A quick hose-down after a day in the mud saves a lot of that.

Seat and switches in the cab

For the cab there are tractor seats, including an air suspended GRAMMER seat, and gas struts for windows and hatches. The dashboard carries rocker switches, for instance for the front work lights, and contact switches and pressure switches are on offer too. If a lamp stays dark, check the fuse and the bulb before replacing the switch. If the switch no longer clicks or feels loose, it is the culprit itself.

When an air suspended seat slowly sinks or no longer rises to height, the cause is often the air bag, the valve or the compressor connection. Check those points before replacing the whole seat. If the base is worn out or the cover torn, a new seat is usually the simplest answer.

Engine seals

For the engine there is a water pump gasket for the Sisu unit, an O-ring for the feed pump, sealing rings and seals, including one for the lubrication line.

The right part for your CVT 170

Type and chassis number are on the type plate. That number helps when the equipment differs within the CVT 170, for example in the cab or the hitch system. For seals the number on the old part is often even clearer.

Steyr's CVT family is a big one. If you have several of its tractors, each type has its own page, such as the Steyr 6145 CVT, Steyr 6150 CVT, Steyr 6165 CVT, Steyr 6175 CVT, Steyr 6195 CVT and Steyr 6240 CVT. Pick the parts for that tractor there. For the remaining Steyr ranges, start from the brand overview at Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart