Menu
EUR

Massey Ferguson 6616 tractor parts & technical data

Looking for Massey Ferguson 6616 parts? This page brings together more than 250 items, including trailer couplings, electrics and lighting for the 6600 series.

287 parts found for Massey Ferguson 6616
Show:
Internal plate PTO clutch 3,6 mm, inner 8,8 mm, outer 135 mm
Version: thickness = 3,6 mm inner = 8,8 mm outer = 135 mm More
Version: thickness = 3,6 mm inner = 8,8 mm outer = 135 mm
€24,80 €20,50
GRANIT Internal plate differential catch 2,5 mm, inner 148,8 mm
GRANIT
Version: thickness = 2,5 mm inner = 148,8 mm outer = 211 mm More
Version: thickness = 2,5 mm inner = 148,8 mm outer = 211 mm
€42,10 €34,79 €39,95 €33,02
You save 5%
AKS-Dasis Thermostat airco Challenger, Massey Ferguson
€102,51 €84,72 €97,35 €80,45
You save 5%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€472,38 €390,40 €417,75 €345,25
You save 12%
Brake disc Ø 353,5 mm, Dyna 4/6 Massey Ferguson
€181,39 €149,91 €172,30 €142,40
You save 5%
Brake mechanism hand brake with 3 tension springs Massey Ferguson 3050-6480
GRANIT O-ring PTO shaft 47,29 x 2,62 mm Massey Ferguson
GRANIT
Version: Ø 47,29 x 2,62 mm. More
Version: Ø 47,29 x 2,62 mm.
€8,35 €6,90
Gearshift cable PTO engagement 2520 mm, M6 Massey Ferguson
Cable length: 2520 mm. Sleeve length: 2310 mm. Thread: M6. More
Cable length: 2520 mm. Sleeve length: 2310 mm. Thread: M6.
€158,43 €130,93 €150,50 €124,38
You save 5%
PTO shaft end piece 1 3/8 inch, 21 splines Fendt, Valtra-Valmet
Version: 1 3/8", 21 splines. More
Version: 1 3/8", 21 splines.
€343,36 €283,77 €326,15 €269,55
You save 5%
MAHLE Fan clutch Ø 198 mm Massey Ferguson 6485-7499
€1.062,76 €878,31 €664,20 €548,93
You save 38%
Signal transmitter exhaust aftertreatment Massey Ferguson 5600-7700
€487,56 €402,94 €463,15 €382,77
You save 5%
GRANIT Air hose to the intercooler Massey Ferguson 6612-6616
€167,96 €138,81 €159,55 €131,86
You save 5%
GRANIT Pressure pipe Fendt, Massey Ferguson
GRANIT
Designation: For 38015243. More
Designation: For 38015243.
€133,70 €110,50
Gas strut door 600 N, 245 mm, stroke 76 mm Massey Ferguson
suitable for: Tür. Newtons: 600. A: 245 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 19 mm. Stroke: 76 mm. To fit: door. More
suitable for: Tür. Newtons: 600. A: 245 mm. B: 120 mm. C: 10 mm. D: 1...
€33,41 €27,61 €31,70 €26,20
You save 5%
GRANIT Handle side window, right Massey Ferguson Series 5S-8400
€58,56 €48,40 €55,60 €45,95
You save 5%
GRANIT Bearing pin bore Ø 20 mm Massey Ferguson, Renault
GRANIT
Dimensions: Hole Ø: 20 mm. More
Dimensions: Hole Ø: 20 mm.
€42,12 €34,81 €40,00 €33,06
You save 5%
Walterscheid Top drawbar rail 311 mm, pin Ø 22 mm, coupling pin 38 mm
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 88,5 kN. Colour: Black. Descript... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€2.209,02 €1.825,64 €1.822,40 €1.506,12
You save 18%
Showing 217 - 240 of 287

Massey Ferguson 6616 parts for the driveline, hitch and cab

When the four wheel drive clutch on a 6616 starts to slip, or the dash flags a fault on a speed sensor, the parts you need sit deep inside the tractor. More than 250 replacement parts fit this Massey Ferguson, from clutch plates to work lamps, with makers such as GRANIT, Scharmüller, Walterscheid, HELLA and DANA Spicer.

Inside the driveline

For the 4WD clutch there are external and internal plates. Alongside them you will find inductive sensors, such as the one for transmission speed, and temperature sensors. Then there are O-rings, including ones for the PTO, sealing rings, adjusting plates and seals, right down to the seal on the cab door handle.

If you are rebuilding a plate pack, soak the new friction plates in the same oil the transmission runs on before you assemble them. Plates fitted dry tend to judder or glaze in the first hours. Look at the steel plates too. Blue heat marks or warping tell you how hot the pack has been running and whether the steels should be renewed at the same time.

A fault code from an inductive sensor does not always mean the sensor has failed. Metal fines on the tip are enough to upset the signal. Wipe it clean and check the plug for green corrosion before ordering a new one. If the fault stays, replacement is the next step.

Hitching and hydraulics at the rear

At the back there are ball drawbars, drawbar frames and adapter plates. If you pull a trailer with forced steering, inner parts and other components for that system are on this page as well. A hydraulic top link from Walterscheid lets you adjust heavy implements without climbing down from the seat.

For the cab there are work lamps from HELLA and GRANIT, welcome once autumn shortens the days, plus control knobs.

Choosing the right part for a 6616

The rating plate confirms you are working on a 6616. Stick to that model, because each tractor in the 6600 series has a page of its own. With plates, sensors and sealing rings, the safest route is the number on the old component. Compare it with the parts on this page before ordering, and with clutch plates check whether the teeth sit on the inside or the outside.

Running more than one tractor from this series? Each has its own page:

Older or other Massey Ferguson tractors are covered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart