Menu
EUR

Massey Ferguson 7618 tractor parts & technical data

Working on a Massey Ferguson 7618? This page holds more than 300 parts that fit, including trailer couplings, electrics and lighting.

330 parts found for Massey Ferguson 7618
Show:
Ball joint 260 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€82,15 €67,89 €75,58 €62,46
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 289 mm, 540 rpm
Version: 540 rpm br> Length 289 mm, 1 3/8", 6 grooves. More
Version: 540 rpm br> Length 289 mm, 1 3/8", 6 grooves.
€311,98 €257,83 €287,02 €237,21
You save 8%
Bosch/Rexroth Double pump anticlockwise 14 + 19 cm³/rpm. Massey Ferguson
Bosch/Rexroth
Output volume: 14 + 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Anticlockwise. Bosch no.: 0510665440. More
Output volume: 14 + 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direc...
€1.107,71 €915,46 €1.019,09 €842,23
You save 8%
V-belt with compressed air system Massey Ferguson 6612-7626 - 2 pieces
Version: With compressed air system. More
Version: With compressed air system.
€37,88 €31,30
Oil cooler 570 x 260 x 65 mm Massey Ferguson 6612-7618
Width: 65 mm. Height: 260 mm. Length: 570 mm. More
Width: 65 mm. Height: 260 mm. Length: 570 mm.
€1.221,46 €1.009,48
Rail pressure sensor Fendt 5255L-9470X, Massey Ferguson Series 5600-9530
Tensioning pulley Ø 74 mm, height 46,5 mm Massey Ferguson
Outer Ø: 74 mm. Height: 46,5 mm. More
Outer Ø: 74 mm. Height: 46,5 mm.
€72,09 €59,58
Pressure pipe Fendt, Massey Ferguson
Designation: For 38015243. More
Designation: For 38015243.
€133,71 €110,50
Gas strut door 600 N, 245 mm, stroke 76 mm Massey Ferguson
suitable for: Tür. Newtons: 600. A: 245 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 19 mm. Stroke: 76 mm. To fit: door. More
suitable for: Tür. Newtons: 600. A: 245 mm. B: 120 mm. C: 10 mm. D: 1...
€34,86 €28,81 €32,07 €26,51
You save 8%
Threaded spindle adjuster Massey Ferguson 3050-3125, 6110-6290
€89,14 €73,67 €82,01 €67,78
You save 8%
ROCKINGER Drawbar without sensor rail 311 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 84,3 kN. Colour: Black. Descript... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.143,32 €944,89 €880,91 €728,02
You save 23%
Walterscheid Drawbar frame System 80 335/22/30, 2000/3000 kg, 75,0/85,6/88,2 kN
Walterscheid
D-value: 75,0 ; 85,6 ; 88,2 kN. Detent pin Ø: 22 mm. Guide width: 30 mm. Rail width: 335 mm. Load capacity: 2000 / 3000 kg. Detent: 6. EC certificati... More
D-value: 75,0 ; 85,6 ; 88,2 kN. Detent pin Ø: 22 mm. Guide width: 30 ...
€5.170,49 €4.273,13 €4.087,83 €3.378,38
You save 21%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Scharmüller Forced steering inner part right Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Right. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load capacity:... More
Assembly notes: Right. Steering power: 2 t. Lock: K50. Description: Ap...
€548,49 €453,30 €501,80 €414,71
You save 9%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
Sensor Power Boost transmission with connection cable 6445-7618
Version: Power boost sensor, Connection cable with plug. More
Version: Power boost sensor, Connection cable with plug.
€528,72 €436,96
Brake disc Ø 353,5 mm, Dyna 4/6 Massey Ferguson
€189,28 €156,43 €174,14 €143,92
You save 8%
Brake mechanism hand brake with 3 tension springs Massey Ferguson 3050-6480
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
Borg Warner Fan clutch Massey Ferguson Tier 3 6480-6499, 7480-7497
€646,94 €534,66 €544,20 €449,75
You save 16%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
V-belt without compressed air system Massey Ferguson 6612-7626
Version: Without compressed air system with one or two alternators, and with compressed air system and two alternators. More
Version: Without compressed air system with one or two alternators, an...
€59,23 €48,95
Valve cover gasket lower, two-piece valve cover
€38,54 €31,85 €35,46 €29,30
You save 8%
Crankshaft seal for Ø 65 x 90 x 10 mm Fendt, Massey Ferguson
Outer Ø: 90 mm. Width: 10 mm. Inner Ø: 65 mm. More
Outer Ø: 90 mm. Width: 10 mm. Inner Ø: 65 mm.
€70,13 €57,96 €64,52 €53,32
You save 8%
Tool box
€182,91 €151,17 €168,28 €139,07
You save 8%
Lock tool box Massey Ferguson series 5600-8700/S
€91,16 €75,34 €83,87 €69,31
You save 8%
Pivot
€585,11 €483,56 €538,30 €444,88
You save 8%
Scharmüller Drawbar K80 rail 309 mm, pin Ø 22 mm, 3000 kg, black
Scharmüller
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.553,04 €1.283,50 €1.265,01 €1.045,46
You save 19%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 311 mm, 4000 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.231,07 €1.017,41 €1.077,64 €890,61
You save 12%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.347,24 €1.939,87 €1.855,75 €1.533,68
You save 21%
Scharmüller Drawbar frame 335/22/30, 89,3 kN, 4000 kg Challenger
Scharmüller
suitable for: Massey Ferguson. Series: 6400 Dyna-4/6 / Dynashift. Category: Bearing supports. Version: Standard. Colour: AGCO grey. D-value: 89,3 kN. ... More
suitable for: Massey Ferguson. Series: 6400 Dyna-4/6 / Dynashift. Cate...
€2.540,32 €2.099,44 €2.387,09 €1.972,80
You save 6%
Knob black switch, heating / air conditioning
Version: For switch, heater/air conditioning. More
Version: For switch, heater/air conditioning.
€19,96 €16,50
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€370,79 €306,44 €314,26 €259,72
You save 15%
Pressure switch vacuum gauge hydraulics, right-hand cover
Version: Hydraulics, right-hand cover. More
Version: Hydraulics, right-hand cover.
€98,86 €81,70 €90,95 €75,17
You save 8%
Temperature sensor transmission oil temperature
Version: Transmission oil temperature. More
Version: Transmission oil temperature.
€37,53 €31,02 €34,53 €28,54
You save 8%
Number plate light 12V5WK / R5W
To fit as: Case IH 238, 248, 258, 268, 288, 433, 533, 633, 733, 833, 933, 440, 540, 640, 740, 840, 940, 743, 745 S, 844 S, 845, 1255, 1455, 956, 1056,... More
To fit as: Case IH 238, 248, 258, 268, 288, 433, 533, 633, 733, 833, 9...
€23,68 €19,57
Hand brake cable 1060 mm Massey Ferguson 6445-7718S
Length: 1060 mm. Dimensions: Length = 1060 mm. More
Length: 1060 mm. Dimensions: Length = 1060 mm.
€120,81 €99,84 €111,15 €91,86
You save 8%
Brake disc hand brake Ø 165 mm, thickness 4 mm Massey Ferguson
€67,07 €55,43 €61,70 €51,00
You save 8%
O-ring PTO shaft 47,29 x 2,62 mm Massey Ferguson
Version: Ø 47,29 x 2,62 mm. More
Version: Ø 47,29 x 2,62 mm.
€8,74 €7,22
Showing 145 - 192 of 330

Massey Ferguson 7618 parts

Four wheel drive that no longer engages cleanly, a thermostat stuck open, a seal around the door handle that lets in draughts: the jobs on a Massey Ferguson 7618 vary a lot. This page lists more than 300 parts for it, from GRANIT, Scharmüller, Walterscheid, ROCKINGER and HELLA.

Clutch packs and seals in the transmission

There are internal and external plates, including plates for the four wheel drive clutch, plus adjusting plates, PTO O-rings, sealing rings and seals. When rebuilding a plate pack, lay the old plates out in the order they came out. You will see straight away whether one was missing or fitted the wrong way round, and you can stack the new set the same way.

An inductive sensor reads transmission speed. If it throws a fault, check the tip for metal fines before replacing it. A clean is sometimes all it takes.

Thermostats

Thermostats for the 7618 come in more than one version. The opening temperature is stamped on the old one, and that is the value to match. A thermostat that opens too early keeps the engine running cold in spring and autumn.

Hitching and linkage

For the rear there are drawbars, drawbar frames, adapter plates, automatic hitches and forced steering for trailers with a steered axle. The linkage is covered by hydraulic lift rods. Work lamps come partly from HELLA.

A hydraulic lift rod lets you adjust the lower links without leaving the seat. If oil is weeping past the rod, keep the cylinder clean and replace it before dirt gets into the hydraulic system. On forced steering, play in the lock is the first sign of wear. Check it at every service, since a trailer that no longer tracks cleanly scrubs its tyres. Adjusting plates in axle and gearbox always go back where they came from, so keep them sorted by position when you strip things down.

An automatic hitch needs little care. Keep the catch and the lock clean and lightly greased, and listen for it to latch after coupling up.

Type plate and reference number

Take the serial number from the type plate and the reference number from the old part. Transmissions and equipment vary within the 7600 series, so both help. For clutch plates, measure the inner and outer diameter of an old plate before you order.

Related models have their own pages: Massey Ferguson 7615, Massey Ferguson 7616, Massey Ferguson 7619, Massey Ferguson 7620 and Massey Ferguson 7624. The whole brand is on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart