Menu
EUR

Massey Ferguson 7618 tractor parts & technical data

Working on a Massey Ferguson 7618? This page holds more than 300 parts that fit, including trailer couplings, electrics and lighting.

330 parts found for Massey Ferguson 7618
Show:
O-ring PTO shaft 104,37 x 3,53 mm Massey Ferguson
Version: Ø 104,37 x 3,53 mm. More
Version: Ø 104,37 x 3,53 mm.
€8,71 €7,20
Gearshift cable PTO engagement 2520 mm, M6 Massey Ferguson
Cable length: 2520 mm. Sleeve length: 2310 mm. Thread: M6. More
Cable length: 2520 mm. Sleeve length: 2310 mm. Thread: M6.
€165,32 €136,63 €152,09 €125,70
You save 8%
Rep set drive set Fendt, Massey Ferguson
€464,66 €384,02 €427,49 €353,30
You save 8%
Nord-Lock detent edged washers 17 x 25,4 x 3,4 mm, DIN 88132 - 10 pieces
Description: With NORD - LOCK the bolt locks itself., The key to ensuring the best locking action lies in the different angles. The expansion of the N... More
Description: With NORD - LOCK the bolt locks itself., The key to ensur...
€43,62 €36,05 €40,13 €33,17
You save 8%
Signal transmitter exhaust aftertreatment Massey Ferguson 5600-7700
€508,77 €420,47 €468,07 €386,83
You save 8%
Fan clutch Massey Ferguson Tier 3 6485-7499
€574,66 €474,93 €528,69 €436,93
You save 8%
Water pump Massey Ferguson 5465-7626
€326,39 €269,74 €300,28 €248,16
You save 8%
Thermostat Ø 54 mm, 79 °C
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€19,81 €16,37
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
Oil dipstick transmission Massey Ferguson 5425-7618
€51,59 €42,64 €47,46 €39,23
You save 8%
Temperature sensor Injectors-Rail Sisu-engines
Version: For common rail systems, to fit Sisu engines. More
Version: For common rail systems, to fit Sisu engines.
€174,05 €143,84 €160,13 €132,34
You save 8%
Handle for roof hatch Massey Ferguson Series 600-8400
€92,55 €76,49 €85,15 €70,37
You save 8%
Lift arm shaft Massey Ferguson 5400-6600
€558,27 €461,38 €513,61 €424,47
You save 8%
O-ring 55 x 3,4 mm Massey Ferguson
Dimensions: 55 x 3.4 mm. More
Dimensions: 55 x 3.4 mm.
€14,29 €11,81
Front power lift seal set Massey Ferguson 5465-7618
€172,21 €142,32 €158,43 €130,94
You save 8%
Mirror glass heated right / left 310 x 223 mm, 12 V
Dimensions: 310 x 223 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 2000 mm. More
Dimensions: 310 x 223 mm. Version: Can be heated. Installation locatio...
€119,95 €99,13 €110,35 €91,20
You save 8%
Hydraulic top link cat. 3, 640 - 876 mm, stroke 236 mm, 11 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 640 / 876 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Adjustab... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 640 / 876 mm. Piston rod Ø D: 45 m...
€686,94 €567,72 €631,98 €522,30
You save 8%
Mirror 330 x 240 mm, heated, rod-Ø 16 - 22 mm Massey Ferguson
Dimensions: 330 x 240 mm. Height: 330 mm. Width: 240 mm. Version: Heated. Notes: Electric adjustment. Rod Ø: 16 - 22 mm. More
Dimensions: 330 x 240 mm. Height: 330 mm. Width: 240 mm. Version: Heat...
€209,98 €173,54 €193,18 €159,65
You save 8%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.368,70 €1.131,16 €1.247,49 €1.030,99
You save 9%
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 2000 kg, AGCO gray
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 175 mm. Colour: AGCO grey. Overh... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.472,52 €1.216,96
Scharmüller Drawbar K80 manual, rail 322 mm, pin Ø 22 mm, 3000 kg, black
Scharmüller
Rail width: 322 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 322 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.285,36 €1.062,28 €1.155,81 €955,22
You save 10%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
You save 18%
Walterscheid Ball hitch K80 311 / 22 / 30 mm, 84,3 kN
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 84.3 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€2.082,09 €1.720,74 €1.646,11 €1.360,43
You save 21%
Scharmüller Automatic hitch rail width 255 mm, coupling pin 38 mm
Scharmüller
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.236,75 €1.022,11 €1.083,22 €895,22
You save 12%
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.405,31 €1.161,41 €1.082,77 €894,85
You save 23%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 60 mm, 415 mm
Scharmüller
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 6... More
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Ve...
€1.791,03 €1.480,19
Walterscheid Ball insert system 80, shank 60 x 60 mm, working length 203 mm
Walterscheid
Shaft cross section W x H: 60 x 60 mm. Overhang: 203 mm. Hole spacing: 115 mm. Hole: 22,5 mm. Colour: Yellow. Description: The model has an integrated... More
Shaft cross section W x H: 60 x 60 mm. Overhang: 203 mm. Hole spacing:...
€2.404,06 €1.986,83 €1.900,67 €1.570,80
You save 21%
On-board computer control unit
€514,54 €425,24 €473,38 €391,22
You save 8%
Knob black fan switch, heating / air conditioning
Version: For blower switches, heater/air conditioning. More
Version: For blower switches, heater/air conditioning.
€37,33 €30,85
Rotary switch fan 4 levels, without knob
Version: Without knob, Blower, heater (air conditioning). More
Version: Without knob, Blower, heater (air conditioning).
€19,78 €16,34
HELLA Work lamp flood beam H3, 55 W, 12 V, 160 x 100 x 78 mm
HELLA
Bulb: H3. Connection: AMP plug. Form: Oval. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 160 x 100 x 78 mm. Protection class: IP5K4K... More
Bulb: H3. Connection: AMP plug. Form: Oval. Material: Housing: plastic...
€85,73 €70,85 €82,56 €68,23
You save 4%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€89,72 €74,15 €82,54 €68,22
You save 8%
Sensor inductive transmission speed, length 75 mm
Version: Inductive sensor (transmission speed), length: 75 mm. More
Version: Inductive sensor (transmission speed), length: 75 mm.
€190,43 €157,38 €175,20 €144,79
You save 8%
Cardan shaft bearing 36 x 72 x 43 mm Massey Ferguson 5425-6455
€52,89 €43,71 €48,66 €40,21
You save 8%
Universal joint 30,18 x 106,3 mm, maintenance-free
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: ...
€233,83 €193,25 €215,12 €177,79
You save 8%
Piston ring front wheel drive Massey Ferguson 3050-5612
€45,99 €38,01 €42,31 €34,97
You save 8%
Sealing ring rear axle shaft inner Ø 82,62 mm, height 12 mm Massey Ferguson
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 82,62 mm. Height 1: 12 mm. Installation location: front axle. More
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 82,62 mm. Heigh...
€20,58 €17,00
Sealing ring 80 x 60 x 10 mm Massey Ferguson 3050-6470
Version: 80 x 60 x 10 mm. More
Version: 80 x 60 x 10 mm.
€22,96 €18,98
Bush for Vario drive assembly Fendt, Massey Ferguson
€60,13 €49,69 €55,32 €45,72
You save 8%
Showing 193 - 240 of 330

Massey Ferguson 7618 parts

Four wheel drive that no longer engages cleanly, a thermostat stuck open, a seal around the door handle that lets in draughts: the jobs on a Massey Ferguson 7618 vary a lot. This page lists more than 300 parts for it, from GRANIT, Scharmüller, Walterscheid, ROCKINGER and HELLA.

Clutch packs and seals in the transmission

There are internal and external plates, including plates for the four wheel drive clutch, plus adjusting plates, PTO O-rings, sealing rings and seals. When rebuilding a plate pack, lay the old plates out in the order they came out. You will see straight away whether one was missing or fitted the wrong way round, and you can stack the new set the same way.

An inductive sensor reads transmission speed. If it throws a fault, check the tip for metal fines before replacing it. A clean is sometimes all it takes.

Thermostats

Thermostats for the 7618 come in more than one version. The opening temperature is stamped on the old one, and that is the value to match. A thermostat that opens too early keeps the engine running cold in spring and autumn.

Hitching and linkage

For the rear there are drawbars, drawbar frames, adapter plates, automatic hitches and forced steering for trailers with a steered axle. The linkage is covered by hydraulic lift rods. Work lamps come partly from HELLA.

A hydraulic lift rod lets you adjust the lower links without leaving the seat. If oil is weeping past the rod, keep the cylinder clean and replace it before dirt gets into the hydraulic system. On forced steering, play in the lock is the first sign of wear. Check it at every service, since a trailer that no longer tracks cleanly scrubs its tyres. Adjusting plates in axle and gearbox always go back where they came from, so keep them sorted by position when you strip things down.

An automatic hitch needs little care. Keep the catch and the lock clean and lightly greased, and listen for it to latch after coupling up.

Type plate and reference number

Take the serial number from the type plate and the reference number from the old part. Transmissions and equipment vary within the 7600 series, so both help. For clutch plates, measure the inner and outer diameter of an old plate before you order.

Related models have their own pages: Massey Ferguson 7615, Massey Ferguson 7616, Massey Ferguson 7619, Massey Ferguson 7620 and Massey Ferguson 7624. The whole brand is on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart