Menu
EUR

Massey Ferguson 8240 tractor parts & technical data

Time to replace a trailer coupling or a light on the Massey Ferguson 8240? More than 350 parts for this 8200 series tractor are listed here, electrics too.

343 parts found for Massey Ferguson 8240
Show:
External plate PTO clutch 4 mm, inner 163 mm, outer 232 mm
5%
External plate PTO clutch 4 mm, inner 163 mm, outer 232 mm
Version: Thickness: 4 mm Inner: 163 mm Outer: 232 mm
€103,26 €85,34 €98,00 €80,99
 
AKS-Dasis Thermostat airco Challenger, Massey Ferguson
5%
AKS-Dasis
Thermostat airco Challenger, Massey Ferguson
€102,51 €84,72 €97,35 €80,45
 
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 238 g
5%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 238 g
Connection thread A: # 8, 1/2"" O-ring | Connection thread E: # 6, 3/8"" O-ring ...
€54,78 €45,27 €52,00 €42,98
 
SANDEN Aircon compressor 12 V, pulley Ø 140 mm, 2 grooves Massey Ferguson
5%
SANDEN
Aircon compressor 12 V, pulley Ø 140 mm, 2 grooves Massey Ferguson
No. of grooves: 2 | Refrigerant: R 134a | Pulley Ø (mm): 140 | Nominal voltage (...
€575,91 €475,96 €547,10 €452,15
 
Ball joint with axial joint 350 mm, M20 x 1,5 / M22 x 1,5
5%
Ball joint with axial joint 350 mm, M20 x 1,5 / M22 x 1,5
Taper (mm): 23,5 - 26 | E (mm): 23,5 | F (mm): 26 | A (mm): 350 | D (mm): M22 x ...
€157,26 €129,97 €149,35 €123,43
 
Ball head with female thread 270 mm, taper 24 - 26 mm
5%
Ball head with female thread 270 mm, taper 24 - 26 mm
Taper (mm): 24 - 26 | C (mm): M20 x 1,5 | F (mm): 26 | A (mm): 270 | D (mm): M24...
€78,72 €65,06 €74,75 €61,78
 
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
12%
Scharmüller
Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwis...
€472,38 €390,40 €417,75 €345,25
 
GRANIT Starter motor with reduction 12 V, 3,0 kW, 10 teeth, 227 mm, Ø 89 mm
5%
GRANIT
Starter motor with reduction 12 V, 3,0 kW, 10 teeth, 227 mm, Ø 89 mm
€278,71 €230,34 €264,75 €218,80
 
GRANIT Sealing ring drive shaft 93 x 105 x 6 mm Massey Ferguson 3050-8240
5%
GRANIT
Sealing ring drive shaft 93 x 105 x 6 mm Massey Ferguson 3050-8240
€45,42 €37,54 €43,10 €35,62
 
LUK Tractor damper Massey Ferguson 8110-8160, 8210-8250
5%
LUK
Tractor damper Massey Ferguson 8110-8160, 8210-8250
€580,19 €479,50 €551,15 €455,50
 
GRANIT Gaiter for gear lever Massey Ferguson 5425-8250
5%
GRANIT
Gaiter for gear lever Massey Ferguson 5425-8250
€87,30 €72,15 €82,90 €68,51
 
GRANIT Sealing ring hollow shaft Ø 48 x 72 x 10 mm Massey Ferguson 3050-8250
5%
GRANIT
Sealing ring hollow shaft Ø 48 x 72 x 10 mm Massey Ferguson 3050-8250
Material: FPM (fluorine rubber). Inner Ø d1: 48 mm. Height 1: 10 mm.
€39,80 €32,89 €37,80 €31,24
 
Gearshift cable PTO engagement 2520 mm, M6 Massey Ferguson
5%
Gearshift cable PTO engagement 2520 mm, M6 Massey Ferguson
Cable length: 2520 mm. Sleeve length: 2310 mm. Thread: M6.
€158,43 €130,93 €150,50 €124,38
 
Gasket manifold for turbocharger 162000110800, 47107834
5%
Gasket manifold for turbocharger 162000110800, 47107834
€31,81 €26,29 €30,20 €24,96
 
GRANIT O-ring sump Ø 50 x 5,6 mm Massey Ferguson 8170-8280
GRANIT
O-ring sump Ø 50 x 5,6 mm Massey Ferguson 8170-8280
Ø: 50 x 5,6 mm.
€4,76 €3,93
 
GRANIT Seal timing case Massey Ferguson, Valtra-Valmet
GRANIT
Seal timing case Massey Ferguson, Valtra-Valmet
€28,80 €23,80
 
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm.
€14,60 €12,07
 
Hand throttle cable A 860 mm, B 710 mm Massey Ferguson
5%
Hand throttle cable A 860 mm, B 710 mm Massey Ferguson
A: 860 mm. B: 710 mm.
€80,88 €66,84 €76,80 €63,47
 
Showing 265 - 288 of 343

Massey Ferguson 8240 parts for the PTO clutch, cab and hitch

A slipping PTO is one of the classic jobs on a Massey Ferguson 8240, which is why inner and outer plates for the PTO clutch sit on this page next to more than 350 other parts that fit this tractor. They come from GRANIT and from makers such as Scharmüller, Cobo, HELLA and GRAMMER, and cover the engine bay, the cab, lighting and the rear hitch.

What you can fit to an 8240

  • Driveline and engine: PTO clutch plates, starter motors, thermostats and O-rings, for example for the feed pump.
  • Sealing: seals and sealing rings, such as a seal for the tank sensor and a sealing ring for the rear window lock.
  • Cab: gas struts for the rear window, mirrors, tractor seats, contact switches and push buttons.
  • Lighting: work lamps from HELLA and others, including a square built-in spotlight.
  • Hitching: drawbars for the hitch rail and bushes for the split pin lock.

Rebuilding the PTO clutch properly

Once the clutch housing is open, replace the inner and outer plates as a full pack. Fitting a fresh friction plate against a worn, heat-blued steel plate means it runs hot again and the PTO starts slipping under heavy load. Lay every steel plate on a flat bench and check that it sits true. While you are in there, renew the O-rings and sealing rings in that area too, so a small weep does not send you back into the housing a month later.

If the engine does not crank when you turn the key, do not condemn the starter straight away. A worn contact switch gives exactly the same symptoms. With a multimeter, check whether voltage reaches the starter signal wire with the key in the start position. If nothing arrives, the fault lies in the switch or the wiring and the starter can stay where it is. The two gas struts on the rear window age at the same rate, so change them as a pair. A single new strut pushes the glass open unevenly and strains the hinges. When fitting a new HELLA work lamp, look at the plug as well and protect the pins with a little contact grease.

Matching the part to your tractor

The type plate on the tractor tells you exactly which 8240 you are working on. For a thermostat, starter or switch, your best clue is the number stamped on or stuck to the old part. Compare it with the product details on this page. For clutch plates, measure the thickness and the inner and outer size of the old plate with a caliper before ordering.

Other tractors in the 8200 series

If the 8240 shares the yard with another model from the same series, order through that tractor's own page so you only see the parts recorded for it:

Every other model page for the brand is gathered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart