Menu
EUR

Massey Ferguson 8240 tractor parts & technical data

Time to replace a trailer coupling or a light on the Massey Ferguson 8240? More than 350 parts for this 8200 series tractor are listed here, electrics too.

343 parts found for Massey Ferguson 8240
Show:
GRANIT LED work lights spotlight 48 W, 6300 lm, 160 x 98,5 x 66,6 mm, 12 / 24 V
10%
GRANIT
LED work lights spotlight 48 W, 6300 lm, 160 x 98,5 x 66,6 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€72,83 €60,19 €65,85 €54,42
 
GRANIT Agricultural machinery spotlight 36 W, 3908 lm, 183 x 102 x 61 mm, 12 / 24 V
5%
GRANIT
Agricultural machinery spotlight 36 W, 3908 lm, 183 x 102 x 61 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€53,43 €44,16 €50,75 €41,94
 
GRANIT LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
5%
GRANIT
LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x ...
€69,88 €57,75 €66,35 €54,83
 
LED work lights spotlight 23 W, 3071 lm, 183 x 101 x 67 mm, 12 / 24 V
5%
LED work lights spotlight 23 W, 3071 lm, 183 x 101 x 67 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€61,09 €50,49 €58,00 €47,93
 
Bush wheel hub 40 x 44 x 35 mm
Bush wheel hub 40 x 44 x 35 mm
€10,55 €8,72
 
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
16%
Scharmüller
Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.390,39 €1.149,08 €1.171,10 €967,85
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
5%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€55,70 €46,03 €52,90 €43,72
 
MAHLE Starter motor 12 V, 2,8 kW, 10 teeth, 237 mm, clockwise
38%
MAHLE
Starter motor 12 V, 2,8 kW, 10 teeth, 237 mm, clockwise
€423,03 €349,61 €264,35 €218,47
 
GRANIT King pin bore 15 mm, outer-Ø 28 mm, hole spacing 66 mm Carraro front axle
5%
GRANIT
King pin bore 15 mm, outer-Ø 28 mm, hole spacing 66 mm Carraro front axle
€38,27 €31,63 €36,35 €30,04
 
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
5%
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
€74,31 €61,41 €70,55 €58,31
 
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Scharmüller
Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M2...
€1.855,80 €1.533,72
 
Bush 86 mm Massey Ferguson 3050-8240
18%
Bush 86 mm Massey Ferguson 3050-8240
€33,27 €27,50 €27,40 €22,64
 
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
20%
ROCKINGER
Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.043,02 €862,00 €838,55 €693,02
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
HELLA Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
HELLA
Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing: 160 mm. ...
€80,85 €66,82
 
Ball joint 240 mm, taper 27 - 30 mm, M24 x 1,5, M24 x 1,5
5%
Ball joint 240 mm, taper 27 - 30 mm, M24 x 1,5, M24 x 1,5
A: 240 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 27 mm. F: 30 mm. Taper: 27 - 30 ...
€95,30 €78,76 €90,50 €74,79
 
GRANIT Ball joint 77 mm, M18 x 1,5, M24 x 1,5 L, taper 19,7 - 22,2 mm
5%
GRANIT
Ball joint 77 mm, M18 x 1,5, M24 x 1,5 L, taper 19,7 - 22,2 mm
A: 77 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 19,7 mm. F: 22,2 mm. Taper: 19,...
€50,24 €41,52 €47,70 €39,42
 
GRANIT Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
GRANIT
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C.
€38,30 €31,65
 
Scharmüller Drawbar K80 rail 314 mm, pin Ø 20 mm, 3000 kg, black
12%
Scharmüller
Drawbar K80 rail 314 mm, pin Ø 20 mm, 3000 kg, black
Rail width: 314 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Load capacity: 3000...
€1.305,87 €1.079,23 €1.154,91 €954,47
 
GRANIT Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
GRANIT
Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
Version: 12 V / 50 A, With bracket, 4-pin, blade terminal 6.3 mm.
€31,60 €26,12
 
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Drawbar frame standard 97,1 kN, 330 mm, ball 80
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN)...
€3.271,95 €2.704,09
 
Eaton Screw transmission Challenger, Massey Ferguson
Eaton
Screw transmission Challenger, Massey Ferguson
Reference no.: 3771408M1
€5,40 €4,46
 
Showing 1 - 24 of 343

Massey Ferguson 8240 parts for the PTO clutch, cab and hitch

A slipping PTO is one of the classic jobs on a Massey Ferguson 8240, which is why inner and outer plates for the PTO clutch sit on this page next to more than 350 other parts that fit this tractor. They come from GRANIT and from makers such as Scharmüller, Cobo, HELLA and GRAMMER, and cover the engine bay, the cab, lighting and the rear hitch.

What you can fit to an 8240

  • Driveline and engine: PTO clutch plates, starter motors, thermostats and O-rings, for example for the feed pump.
  • Sealing: seals and sealing rings, such as a seal for the tank sensor and a sealing ring for the rear window lock.
  • Cab: gas struts for the rear window, mirrors, tractor seats, contact switches and push buttons.
  • Lighting: work lamps from HELLA and others, including a square built-in spotlight.
  • Hitching: drawbars for the hitch rail and bushes for the split pin lock.

Rebuilding the PTO clutch properly

Once the clutch housing is open, replace the inner and outer plates as a full pack. Fitting a fresh friction plate against a worn, heat-blued steel plate means it runs hot again and the PTO starts slipping under heavy load. Lay every steel plate on a flat bench and check that it sits true. While you are in there, renew the O-rings and sealing rings in that area too, so a small weep does not send you back into the housing a month later.

If the engine does not crank when you turn the key, do not condemn the starter straight away. A worn contact switch gives exactly the same symptoms. With a multimeter, check whether voltage reaches the starter signal wire with the key in the start position. If nothing arrives, the fault lies in the switch or the wiring and the starter can stay where it is. The two gas struts on the rear window age at the same rate, so change them as a pair. A single new strut pushes the glass open unevenly and strains the hinges. When fitting a new HELLA work lamp, look at the plug as well and protect the pins with a little contact grease.

Matching the part to your tractor

The type plate on the tractor tells you exactly which 8240 you are working on. For a thermostat, starter or switch, your best clue is the number stamped on or stuck to the old part. Compare it with the product details on this page. For clutch plates, measure the thickness and the inner and outer size of the old plate with a caliper before ordering.

Other tractors in the 8200 series

If the 8240 shares the yard with another model from the same series, order through that tractor's own page so you only see the parts recorded for it:

Every other model page for the brand is gathered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart