Menu
EUR

Massey Ferguson 8240 tractor parts & technical data

Time to replace a trailer coupling or a light on the Massey Ferguson 8240? More than 350 parts for this 8200 series tractor are listed here, electrics too.

343 parts found for Massey Ferguson 8240
Show:
GRANIT King pin Carraro front axle 143605
5%
GRANIT
King pin Carraro front axle 143605
€43,44 €35,90 €41,25 €34,09
 
Seal front axle 40 x 60 x 25 mm Case IH, Massey Ferguson
5%
Seal front axle 40 x 60 x 25 mm Case IH, Massey Ferguson
€56,63 €46,80 €53,75 €44,42
 
Carraro Bearing bush front axle 40 x 44 x 35 mm
Carraro
Bearing bush front axle 40 x 44 x 35 mm
€8,85 €7,31
 
GRANIT Bush for splitpenborging 24 teeth, length 112 mm Massey Ferguson
5%
GRANIT
Bush for splitpenborging 24 teeth, length 112 mm Massey Ferguson
Length: 112 mm.
€76,47 €63,20 €72,60 €60,00
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.682,20 €1.390,25
 
Scharmüller Ball connection K80 320 / 25 / 38 mm, 2000 kg, 83,9 kN
12%
Scharmüller
Ball connection K80 320 / 25 / 38 mm, 2000 kg, 83,9 kN
Rail width: 320 mm. Detent pin Ø: 25 mm. Guide width: 38 mm. Load capacity: 2000...
€1.744,57 €1.441,79 €1.542,85 €1.275,08
 
Hose radiator lower Ø 55 mm Massey Ferguson 6497, 6499, 8240-8260
5%
Hose radiator lower Ø 55 mm Massey Ferguson 6497, 6499, 8240-8260
Inner Ø: 55 mm.
€120,29 €99,41 €114,25 €94,42
 
V-belt for air conditioning Massey Ferguson 3670-8280
V-belt for air conditioning Massey Ferguson 3670-8280
Version: For air conditioning.
€6,80 €5,62
 
Optibelt V-belt set Massey Ferguson 2680-8260 - 2 pieces
5%
Optibelt
V-belt set Massey Ferguson 2680-8260 - 2 pieces
€82,03 €67,79 €77,90 €64,38
 
GRANIT Seal valve cover Ø 10 x 21,25 x 7,8 mm
GRANIT
Seal valve cover Ø 10 x 21,25 x 7,8 mm
€1,74 €1,44
 
Sealing ring fuel line Ø 10,7 x 7,74 mm, tube-Ø 5/16 inch
Sealing ring fuel line Ø 10,7 x 7,74 mm, tube-Ø 5/16 inch
Dimensions: Height 6, Outer Ø 10.7, Inner Ø 7.74, For pipe Ø 5/16" mm.
€1,49 €1,23
 
GRANIT Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
5%
GRANIT
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long.
€40,74 €33,67 €38,70 €31,98
 
GRANIT Gas strut door 600 N, 230 mm, stroke 71 mm Massey Ferguson 17476
5%
GRANIT
Gas strut door 600 N, 230 mm, stroke 71 mm Massey Ferguson 17476
suitable for: Tür. Newtons: 600. A: 230 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2...
€48,53 €40,11 €46,10 €38,10
 
Gas strut hood 600 N, 885 mm Massey Ferguson Series 6400-8260
10%
Gas strut hood 600 N, 885 mm Massey Ferguson Series 6400-8260
Newtons: 600. A: 885 mm. B: 460 mm. C: 13 mm. D: 13 mm. To fit: bonnet. Form: 2.
€68,36 €56,50 €61,80 €51,07
 
GRANIT Gas strut door 600 N, 230 mm Massey Ferguson Series 5400-8400
10%
GRANIT
Gas strut door 600 N, 230 mm Massey Ferguson Series 5400-8400
Newtons: 600. A: 230 mm. B: 110 mm. C: 110 mm. D: 8 mm. To fit: door. Form: 2.
€44,57 €36,83 €40,30 €33,31
 
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 2000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 rail 330 mm, pin Ø 25 mm, 2000 kg, AGCO gray
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000...
€1.610,53 €1.331,02 €1.356,50 €1.121,07
 
Scharmüller Drawbar K80 rail 309 mm, pin Ø 22 mm, 3000 kg, black
16%
Scharmüller
Drawbar K80 rail 309 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.383,57 €1.143,45 €1.165,35 €963,10
 
Push button switch lowering 48 V, yellow, make contact
Push button switch lowering 48 V, yellow, make contact
Version: 48 V switching voltage, Yellow button, make contact, Total button trave...
€29,35 €24,26
 
Showing 145 - 168 of 343

Massey Ferguson 8240 parts for the PTO clutch, cab and hitch

A slipping PTO is one of the classic jobs on a Massey Ferguson 8240, which is why inner and outer plates for the PTO clutch sit on this page next to more than 350 other parts that fit this tractor. They come from GRANIT and from makers such as Scharmüller, Cobo, HELLA and GRAMMER, and cover the engine bay, the cab, lighting and the rear hitch.

What you can fit to an 8240

  • Driveline and engine: PTO clutch plates, starter motors, thermostats and O-rings, for example for the feed pump.
  • Sealing: seals and sealing rings, such as a seal for the tank sensor and a sealing ring for the rear window lock.
  • Cab: gas struts for the rear window, mirrors, tractor seats, contact switches and push buttons.
  • Lighting: work lamps from HELLA and others, including a square built-in spotlight.
  • Hitching: drawbars for the hitch rail and bushes for the split pin lock.

Rebuilding the PTO clutch properly

Once the clutch housing is open, replace the inner and outer plates as a full pack. Fitting a fresh friction plate against a worn, heat-blued steel plate means it runs hot again and the PTO starts slipping under heavy load. Lay every steel plate on a flat bench and check that it sits true. While you are in there, renew the O-rings and sealing rings in that area too, so a small weep does not send you back into the housing a month later.

If the engine does not crank when you turn the key, do not condemn the starter straight away. A worn contact switch gives exactly the same symptoms. With a multimeter, check whether voltage reaches the starter signal wire with the key in the start position. If nothing arrives, the fault lies in the switch or the wiring and the starter can stay where it is. The two gas struts on the rear window age at the same rate, so change them as a pair. A single new strut pushes the glass open unevenly and strains the hinges. When fitting a new HELLA work lamp, look at the plug as well and protect the pins with a little contact grease.

Matching the part to your tractor

The type plate on the tractor tells you exactly which 8240 you are working on. For a thermostat, starter or switch, your best clue is the number stamped on or stuck to the old part. Compare it with the product details on this page. For clutch plates, measure the thickness and the inner and outer size of the old plate with a caliper before ordering.

Other tractors in the 8200 series

If the 8240 shares the yard with another model from the same series, order through that tractor's own page so you only see the parts recorded for it:

Every other model page for the brand is gathered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart