Menu
EUR

Steyr 6135 Profi tractor parts & technical data

Engine parts, electrics or a trailer coupling for the Steyr 6135 Profi are all on this page. Choose from more than 150 parts for this Profi series tractor.

171 parts found for Steyr 6135 Profi
Show:
Scharmüller Drawbar 526 mm, 50 x 30 mm, pin 31,5 mm, position 2
Scharmüller
Drawbar 526 mm, 50 x 30 mm, pin 31,5 mm, position 2
Colour: Kubota grey | Width (mm): 50 | Category: Drawbar | Lock: Pin | Trailer l...
€324,75 €268,39
 
Scharmüller Drawbar retrofit kit 820 x 80 x 35 mm, 46,8 kN, 1500 kg, cat. 2, black
Scharmüller
Drawbar retrofit kit 820 x 80 x 35 mm, 46,8 kN, 1500 kg, cat. 2, black
Version: Retrofit kits | Pin Ø (mm): 31,5 | Rail width (mm): 330 | Length (mm): ...
€690,10 €570,33
 
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
16%
Scharmüller
Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330...
€758,99 €627,26 €639,25 €528,31
 
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
5%
CARLISLE
External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
 
GRANIT Contact switch driver’s seat with magnet, electric
GRANIT
Contact switch driver’s seat with magnet, electric
Version: Driver’s seat Switch assembly with magnet
€97,80 €80,83
 
Eaton Shift ring 616 g Case IH, Ford, New Holland, Steyr
5%
Eaton
Shift ring 616 g Case IH, Ford, New Holland, Steyr
Reference no.: E6NN7106AA
€114,83 €94,90 €109,00 €90,08
 
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
5%
LUK
Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31X35.
€551,15 €455,50 €523,55 €432,69
 
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
5%
LUK
Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31x35. Menke no.: 92343.
€734,02 €606,63 €697,30 €576,28
 
Compressed air sensor M12 x 1,5 Case IH, New Holland
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5.
€278,45 €230,12
 
Outer plate hand brake Case IH, New Holland, Steyr
5%
Outer plate hand brake Case IH, New Holland, Steyr
€120,93 €99,94 €114,85 €94,92
 
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
5%
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
€233,24 €192,76 €221,55 €183,10
 
Borg Warner Fan clutch Ford, Case IH, Steyr, New Holland
12%
Borg Warner
Fan clutch Ford, Case IH, Steyr, New Holland
€329,00 €271,90 €288,75 €238,64
 
Silencer with Venturi nozzle for air extraction
5%
Silencer with Venturi nozzle for air extraction
€1.105,12 €913,32 €1.049,85 €867,64
 
GRANIT Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm
5%
GRANIT
Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm
Thread: M30 x 2 L. PCD: 96,77 mm.
€216,15 €178,64 €205,30 €169,67
 
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
 
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
5%
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
€121,56 €100,46 €115,45 €95,41
 
GRANIT Outlet valve Case IH, Steyr
GRANIT
Outlet valve Case IH, Steyr
€32,85 €27,15
 
GRANIT Metering unit with 3 fixing points Case IH, New Holland, Landini
5%
GRANIT
Metering unit with 3 fixing points Case IH, New Holland, Landini
€164,35 €135,83 €156,10 €129,01
 
GRANIT Cylinder head gasket Case IH, Steyr, New Holland
5%
GRANIT
Cylinder head gasket Case IH, Steyr, New Holland
€125,34 €103,59 €119,00 €98,35
 
Exhaust manifold gasket engine F4C Case IH, New Holland, Steyr
Exhaust manifold gasket engine F4C Case IH, New Holland, Steyr
Description: Fits T 6020, 6040, 6060.
€6,90 €5,70
 
GRANIT O-ring thermostat Ford, Case IH, Fiat, Steyr
GRANIT
O-ring thermostat Ford, Case IH, Fiat, Steyr
€4,31 €3,56
 
Showing 73 - 96 of 171

Steyr 6135 Profi parts for hitching, belt drive and the driver's seat

A Steyr 6135 Profi spends much of its working life pulling something, and the more than 150 parts that fit it reflect that. The rear end is well covered with drawbars, drawbar retrofit kits, top drawbars, Piton Fix hitches and adaptor plates. Alongside those you will find multi-rib belts, a PTO speed sensor, push buttons, seats and small seals, supplied by GRANIT, Scharmüller, Walterscheid, GRAMMER and Dayco.

Setting up the rear of the tractor

A height adjustable adaptor plate lets you swap between a drawbar, a Piton Fix and a top drawbar on the same rail. For heavy trailer work, a retrofit kit adds a swinging drawbar. After every change, check that the locking pin drops fully home and that the guide in the rail has not worn oval. Play at that point shows up as a knock every time you pull away.

Belts, sensors and small parts

  • Multi-rib belts and belt kits, including a Dayco Powerband
  • a PTO speed sensor with cable and plug
  • push button switches for the PTO
  • tank caps, thermostat O-rings and sealing rings
  • gas struts for the rear window

Before fitting a new multi-rib belt, spin the tensioner and each pulley by hand. A rough tensioner bearing or a pulley with worn grooves will chew through a fresh belt quickly, which is why belt kits often include the tensioner.

The PTO speed sensor sits close to the shaft, where it takes dirt, water and the odd knock from an implement. If the display shows no speed or a jumping reading, check the plug and cable before replacing the sensor, since green corrosion on the pins is often enough to upset the signal. The PTO push button lives in a similarly damp spot. On the tank cap, look at the seal inside. Once it is hard or cracked, water can get into the tank and you find out later through blocked filters.

Seating

For long days in the cab there are complete air suspended tractor seats and separate seat parts from GRAMMER. If the seat compressor no longer runs, check the fuse and the plug first before you replace the whole seat.

Ordering the right item

The type plate confirms that you are working on a 6135 Profi. For sensors, switches and belts, the number on the old part is your best match. For drawbars and pitons, measure the rail width and pin size of the hitch already fitted.

The 6135 belongs to the Steyr Profi series, and these related tractors each have a page of their own:

The 4120 Profi and 6145 Profi are part of the same series too. Everything else for the brand starts at Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart