Menu
EUR

Steyr 6160 CVT tractor parts & technical data

Parts for the Steyr 6160 CVT can be found here by model instead of by part number. More than 400 items, led by trailer couplings, electrics and lighting.

397 parts found for Steyr 6160 CVT
Show:
GRANIT Rocker switch dashboard hazard warning light switch
GRANIT
Version: Dashboard Control panel Hazard warning light switch More
Version: Dashboard Control panel Hazard warning light switch
€88,18 €72,88 €83,75 €69,21
You save 5%
MAHLE Alternator 14 V, 200 A, flange 82 mm Case IH, New Holland, Steyr
MAHLE
Charging current (A): 200 | Installation angle (°): r 68 | Form: A | Additional information: Compact alternator, dust-tight, with toroidal coil, coil... More
Charging current (A): 200 | Installation angle (°): r 68 | Form: A | ...
€835,67 €690,64 €522,25 €431,61
You save 38%
MAHLE Alternator 14 V, 95 A, flange 50,8 mm, form B
MAHLE
Installation angle (°): 0 | Mounting hole Ø / R (mm): 10,2 / 86,0 | Nominal values (V / A): 14 / 95 | Form: B | Nominal voltage (V): 14 | Flange siz... More
Installation angle (°): 0 | Mounting hole Ø / R (mm): 10,2 / 86,0 | ...
€434,17 €358,82 €271,35 €224,26
You save 38%
MAHLE Alternator 14 V, 200 A, flange 56 mm Case IH, New Holland, Steyr
MAHLE
Charging current (A): 200 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Installation angle (°): l 60 | Direction of rotati... More
Charging current (A): 200 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,...
€724,92 €599,11 €453,00 €374,38
You save 38%
GRANIT Alternator 14 V / 200 A, pulley-Ø 61 mm, flange 56 mm
GRANIT
Pulley spacing (mm): 27,6 | Installation angle (°): l 60 | Form: B | Charging current (A): 200 | Pulley Ø (mm): 61.0 | Mounting hole Ø / R (mm): 10... More
Pulley spacing (mm): 27,6 | Installation angle (°): l 60 | Form: B | ...
€388,95 €321,45 €369,50 €305,37
You save 5%
FEBI Temperature sensor -40 up to 850 °C, curved, length 50 mm
FEBI
Version: -40 to 850°C More
Version: -40 to 850°C
€172,44 €142,51 €68,45 €56,57
You save 60%
FEBI Gas strut door 850 N, 213 mm, stroke 44 mm Steyr, New Holland
FEBI
To fit as: Case IH Door More
To fit as: Case IH Door
€65,34 €54,00 €28,77 €23,78
You save 56%
Nut steering cylinder and housing CARRARO front axle 642489
€32,13 €26,55 €30,50 €25,21
You save 5%
GRANIT Track rod 426 mm, taper 23,5 - 26,5 mm
GRANIT
A: 426 mm. C: M20 x 1,5 mm. D: M20 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 426 mm. C: M20 x 1,5 mm. D: M20 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€137,78 €113,87 €130,85 €108,14
You save 5%
Brake lining hand brake lining on one side Case IH, Steyr, New Holland
GRANIT Starter ring gear Ø 390/360 mm, 128 teeth Case IH, Steyr, New Holland
GRANIT
Version: Ø 390/360 mm, 128 teeth. More
Version: Ø 390/360 mm, 128 teeth.
€144,24 €119,21 €137,00 €113,22
You save 5%
GRANIT Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
GRANIT
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€216,46 €178,89 €205,60 €169,92
You save 5%
Dayco V-belt air conditioning and air brake system 13 mm, 950 mm heavy duty
Dayco
Width: 13 mm. Length: 950 mm. Version: Heavy Duty. More
Width: 13 mm. Length: 950 mm. Version: Heavy Duty.
€23,55 €19,46
Borg Warner Fan clutch Case IH, Steyr, New Holland
€545,30 €450,66
Borg Warner Cooling fan Ø 570 mm Case IH, New Holland, Steyr
€212,48 €175,60 €186,50 €154,13
You save 12%
Borg Warner Fan clutch M30 x 2 L, Ø 152,4 mm Steyr, Case IH
Borg Warner
Thread: M30 x 2 L. PCD: 152,4 mm. More
Thread: M30 x 2 L. PCD: 152,4 mm.
€420,11 €347,20 €368,75 €304,75
You save 12%
Gasket exhaust turbocharger New Holland, Steyr, Case IH
€76,28 €63,04 €72,45 €59,88
You save 5%
GRANIT O-ring Case IH, New Holland, Steyr
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€37,90 €31,32 €36,00 €29,75
You save 5%
Humidity sensor exhaust aftertreatment Steyr, Case IH
€270,44 €223,50 €256,90 €212,31
You save 5%
Showing 289 - 312 of 397

Steyr 6160 CVT parts from drawbar to air conditioning

More than 400 replacement parts fit the Steyr 6160 CVT, produced by makers such as GRANIT, Scharmüller, Sauermann, HELLA and GRAMMER. That covers this model from the drawbar right through to the air conditioning compressor. On a tractor that works long days, it helps to find the small items as well, from a switch to an O-ring, in one place.

Drawbar, frame and hitch

At the back of the 6160 CVT it is all about drawbars, drawbar frames and hitch parts, with Scharmüller and Sauermann among the makers. There are drawbars with a towing eye and frames rated for different loads. If you switch often between a tipping trailer and heavy machinery, you know how quickly the locking on a drawbar starts to rattle. Replace worn locking pins in good time, because play in the guide wears out the frame itself too.

Engine, belt drive and cooling

For the engine there are alternators, multi-rib belts and an air conditioning compressor. You will also find seals, for example for the turbocharger oil return line, thermostat O-rings, sealing rings and gaskets for the exhaust and the water pump, among others.

A tip on the multi-rib belt: take a photo of the belt routing before the old one comes off. With the alternator, air conditioning compressor and water pump on one belt, the path is not always obvious. Spin the tensioner pulley by hand while the belt is off. If it rumbles or has play, replace it at the same time, or the new belt will soon start running off line.

Cab and controls

Inside the 6160 CVT there are push button switches, such as the one for the front PTO with cable and plug, and rocker switches for lifting and lowering from the fender. Air suspended tractor seats from GRAMMER, gas struts for windows and panels and HELLA work lamps round off the workplace.

Choosing the matching part

The rating plate tells you which CVT model you have. That matters, because the model numbers in the CVT series sit close together and each has its own page. If in doubt, copy the number from the old part, for instance from a switch or a seal, and compare it with the parts on this page.

Other Steyr CVT tractors have separate pages listing the parts per model:

The Steyr 6185 CVT and 6230 CVT belong to this series as well. Those and every other model are reached through Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart