Menu
EUR

Steyr 6160 CVT tractor parts & technical data

Parts for the Steyr 6160 CVT can be found here by model instead of by part number. More than 400 items, led by trailer couplings, electrics and lighting.

397 parts found for Steyr 6160 CVT
Show:
Optibelt Powerband V-belt 8 grooves John Deere, Case IH, Steyr, New Holland
Optibelt
Ribs: 8 n. Description: without compressed air and without air conditioning. More
Ribs: 8 n. Description: without compressed air and without air conditi...
€84,22 €69,60 €80,00 €66,12
You save 5%
Optibelt Multi-rib belt Case IH CVX 140-195, 1195
€73,10 €60,41 €69,40 €57,36
You save 5%
Optibelt Multi-rib belt 8 ribs Fendt, Case IH, Steyr, New Holland, Deutz-Fahr
€81,93 €67,71 €77,80 €64,30
You save 5%
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
Description: Oxidation catalyst. Version: -40 to 850°C. More
Description: Oxidation catalyst. Version: -40 to 850°C.
€112,81 €93,23 €107,15 €88,55
You save 5%
Electric feed pump without filter 230 l/hour, 0,55 bar
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005. More
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005...
€109,94 €90,86 €104,40 €86,28
You save 5%
GRANIT Valve cover gasket lower Case IH, Steyr, New Holland
€40,00 €33,06 €38,00 €31,41
You save 5%
Main bearing standard Ø 85 mm
€48,38 €39,98 €45,95 €37,98
You save 5%
GRANIT Air hose intercooler inner-Ø 65 / 75 mm, length 98 mm
GRANIT
Inner Ø: 65 / 75 mm. Length: 98 mm. More
Inner Ø: 65 / 75 mm. Length: 98 mm.
€67,49 €55,78 €64,10 €52,98
You save 5%
Air hose to the intercooler Case IH, New Holland, Steyr
€192,15 €158,80 €182,50 €150,83
You save 5%
GRANIT Rail pressure valve Case IH, Steyr, New Holland
€258,70 €213,80 €245,75 €203,10
You save 5%
Metering unit injection pump Case IH, New Holland, Steyr
€229,27 €189,48 €217,80 €180,00
You save 5%
Adjustment pin stabilizer Case IH, Steyr
€90,01 €74,39 €85,50 €70,66
You save 5%
Pin stabilizer Case IH, Steyr
€61,95 €51,20 €58,85 €48,64
You save 5%
GRANIT Bush for lower link shaft 66 x 70 x 45 mm Case IH, Steyr
GRANIT
Dimensions: 66 x 70 x 45 mm. More
Dimensions: 66 x 70 x 45 mm.
€115,43 €95,40 €109,65 €90,62
You save 5%
Sealing ring 82 x 6 mm Case IH, Steyr
Dimensions: 82 x 6 mm. More
Dimensions: 82 x 6 mm.
€10,65 €8,80
Lock three-point parts Steyr 9105-9145, CVT 6135-6195
€81,59 €67,43 €77,50 €64,05
You save 5%
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Ri...
€16,10 €13,31
Mirror 305 x 215 mm, heated, 12 V, left, rod Ø 16 - 22 mm
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heated. Operating voltage: 12 V. Installation location: Left. Notes: Electric adjust... More
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heat...
€192,03 €158,70 €182,40 €150,74
You save 5%
Mirror 145 x 195 mm for trailer hitch
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. Additional information: For trailer hitch. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. Additional in...
€45,95 €37,98
Showing 313 - 336 of 397

Steyr 6160 CVT parts from drawbar to air conditioning

More than 400 replacement parts fit the Steyr 6160 CVT, produced by makers such as GRANIT, Scharmüller, Sauermann, HELLA and GRAMMER. That covers this model from the drawbar right through to the air conditioning compressor. On a tractor that works long days, it helps to find the small items as well, from a switch to an O-ring, in one place.

Drawbar, frame and hitch

At the back of the 6160 CVT it is all about drawbars, drawbar frames and hitch parts, with Scharmüller and Sauermann among the makers. There are drawbars with a towing eye and frames rated for different loads. If you switch often between a tipping trailer and heavy machinery, you know how quickly the locking on a drawbar starts to rattle. Replace worn locking pins in good time, because play in the guide wears out the frame itself too.

Engine, belt drive and cooling

For the engine there are alternators, multi-rib belts and an air conditioning compressor. You will also find seals, for example for the turbocharger oil return line, thermostat O-rings, sealing rings and gaskets for the exhaust and the water pump, among others.

A tip on the multi-rib belt: take a photo of the belt routing before the old one comes off. With the alternator, air conditioning compressor and water pump on one belt, the path is not always obvious. Spin the tensioner pulley by hand while the belt is off. If it rumbles or has play, replace it at the same time, or the new belt will soon start running off line.

Cab and controls

Inside the 6160 CVT there are push button switches, such as the one for the front PTO with cable and plug, and rocker switches for lifting and lowering from the fender. Air suspended tractor seats from GRAMMER, gas struts for windows and panels and HELLA work lamps round off the workplace.

Choosing the matching part

The rating plate tells you which CVT model you have. That matters, because the model numbers in the CVT series sit close together and each has its own page. If in doubt, copy the number from the old part, for instance from a switch or a seal, and compare it with the parts on this page.

Other Steyr CVT tractors have separate pages listing the parts per model:

The Steyr 6185 CVT and 6230 CVT belong to this series as well. Those and every other model are reached through Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart