Menu
EUR

Steyr 6160 CVT tractor parts & technical data

Parts for the Steyr 6160 CVT can be found here by model instead of by part number. More than 400 items, led by trailer couplings, electrics and lighting.

397 parts found for Steyr 6160 CVT
Show:
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
€314,60 €260,00 €298,85 €246,98
You save 5%
GRANIT Cooling fan Ø 570 mm Case IH, New Holland, Steyr
€193,99 €160,32 €184,25 €152,27
You save 5%
GRANIT Feed pump Landini Powermaster, Powermax, series 6, series 7
€461,03 €381,02 €437,95 €361,94
You save 5%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm. More
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€99,24 €82,02 €94,25 €77,89
You save 5%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
You save 5%
Rail pressure sensor Case IH, Steyr, New Holland
€305,28 €252,30 €290,00 €239,67
You save 5%
GRANIT High-pressure pump diesel Case IH, Steyr, New Holland
€1.054,01 €871,08 €1.001,30 €827,52
You save 5%
Belt kit 1683 mm, 8 ribs Case IH, Steyr, New Holland
Contents: Belt, belt tensioner, tensioning pulley. Belt length: 1683 mm. Ribs: 8 n. More
Contents: Belt, belt tensioner, tensioning pulley. Belt length: 1683 m...
€130,21 €107,61 €123,65 €102,19
You save 5%
GRANIT Handle right and left Case IH, Steyr
GRANIT
Installation location: rechts und links. More
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
You save 5%
Gas strut rear window 200 N, 490 mm, ball socket 10 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€49,72 €41,09 €44,95 €37,15
You save 10%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
€72,68 €60,07 €65,75 €54,34
You save 10%
Fender bracket left complete Maxxum 115-150, Puma CVX 140-175
€597,24 €493,59 €540,35 €446,57
You save 10%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: right. More
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
You save 10%
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: left. More
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
You save 10%
GRANIT Cylinder New Holland T7, Case IH Puma, Steyr CVT
€505,34 €417,64 €480,00 €396,69
You save 5%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€112,05 €92,60 €106,40 €87,93
You save 5%
Push button switch front power lift lowering 48 V, button green, Ø 30 mm
Version: Button function, 48 V switching voltage, Green button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal seri... More
Version: Button function, 48 V switching voltage, Green button, make c...
€34,98 €28,91 €33,20 €27,44
You save 5%
HELLA Work lamp flood beam H9, 12 V, 65 W, square, upright
HELLA
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Power consumption: 65 W. Light function: Close-range illumination. Bulbs included:... More
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Po...
€65,50 €54,13
PTO shaft end piece 136 mm, 1 3/8 inch 6 grooves, 8 bores
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150, 160, 170, 175, 195, 1135, 1145, 1155, 1170, 1190, 1195 More
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150,...
€142,82 €118,03 €135,65 €112,11
You save 5%
Showing 121 - 144 of 397

Steyr 6160 CVT parts from drawbar to air conditioning

More than 400 replacement parts fit the Steyr 6160 CVT, produced by makers such as GRANIT, Scharmüller, Sauermann, HELLA and GRAMMER. That covers this model from the drawbar right through to the air conditioning compressor. On a tractor that works long days, it helps to find the small items as well, from a switch to an O-ring, in one place.

Drawbar, frame and hitch

At the back of the 6160 CVT it is all about drawbars, drawbar frames and hitch parts, with Scharmüller and Sauermann among the makers. There are drawbars with a towing eye and frames rated for different loads. If you switch often between a tipping trailer and heavy machinery, you know how quickly the locking on a drawbar starts to rattle. Replace worn locking pins in good time, because play in the guide wears out the frame itself too.

Engine, belt drive and cooling

For the engine there are alternators, multi-rib belts and an air conditioning compressor. You will also find seals, for example for the turbocharger oil return line, thermostat O-rings, sealing rings and gaskets for the exhaust and the water pump, among others.

A tip on the multi-rib belt: take a photo of the belt routing before the old one comes off. With the alternator, air conditioning compressor and water pump on one belt, the path is not always obvious. Spin the tensioner pulley by hand while the belt is off. If it rumbles or has play, replace it at the same time, or the new belt will soon start running off line.

Cab and controls

Inside the 6160 CVT there are push button switches, such as the one for the front PTO with cable and plug, and rocker switches for lifting and lowering from the fender. Air suspended tractor seats from GRAMMER, gas struts for windows and panels and HELLA work lamps round off the workplace.

Choosing the matching part

The rating plate tells you which CVT model you have. That matters, because the model numbers in the CVT series sit close together and each has its own page. If in doubt, copy the number from the old part, for instance from a switch or a seal, and compare it with the parts on this page.

Other Steyr CVT tractors have separate pages listing the parts per model:

The Steyr 6185 CVT and 6230 CVT belong to this series as well. Those and every other model are reached through Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart