Menu
EUR

Steyr 6160 CVT tractor parts & technical data

Parts for the Steyr 6160 CVT can be found here by model instead of by part number. More than 400 items, led by trailer couplings, electrics and lighting.

397 parts found for Steyr 6160 CVT
Show:
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
5%
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
€314,60 €260,00 €298,85 €246,98
 
Seal for return lubrication line
Seal for return lubrication line
€10,45 €8,64
 
GRANIT Cooling fan Ø 570 mm Case IH, New Holland, Steyr
5%
GRANIT
Cooling fan Ø 570 mm Case IH, New Holland, Steyr
Ø: 570 mm.
€193,99 €160,32 €184,25 €152,27
 
GRANIT Feed pump Landini Powermaster, Powermax, series 6, series 7
5%
GRANIT
Feed pump Landini Powermaster, Powermax, series 6, series 7
€461,03 €381,02 €437,95 €361,94
 
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
5%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€99,24 €82,02 €94,25 €77,89
 
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
5%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
 
Rail pressure sensor Case IH, Steyr, New Holland
5%
Rail pressure sensor Case IH, Steyr, New Holland
€305,28 €252,30 €290,00 €239,67
 
GRANIT High-pressure pump diesel Case IH, Steyr, New Holland
5%
GRANIT
High-pressure pump diesel Case IH, Steyr, New Holland
Fuel: Diesel.
€1.054,01 €871,08 €1.001,30 €827,52
 
Belt kit 1683 mm, 8 ribs Case IH, Steyr, New Holland
5%
Belt kit 1683 mm, 8 ribs Case IH, Steyr, New Holland
Contents: Belt, belt tensioner, tensioning pulley. Belt length: 1683 mm. Ribs: 8...
€130,21 €107,61 €123,65 €102,19
 
GRANIT Handle right and left Case IH, Steyr
5%
GRANIT
Handle right and left Case IH, Steyr
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
 
Gas strut rear window 200 N, 490 mm, ball socket 10 mm
10%
Gas strut rear window 200 N, 490 mm, ball socket 10 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: rear screen. For...
€49,72 €41,09 €44,95 €37,15
 
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
10%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
€72,68 €60,07 €65,75 €54,34
 
Fender bracket left complete Maxxum 115-150, Puma CVX 140-175
10%
Fender bracket left complete Maxxum 115-150, Puma CVX 140-175
€597,24 €493,59 €540,35 €446,57
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
 
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
 
GRANIT Cylinder New Holland T7, Case IH Puma, Steyr CVT
5%
GRANIT
Cylinder New Holland T7, Case IH Puma, Steyr CVT
€505,34 €417,64 €480,00 €396,69
 
Sensor wheel speed Hall Matteffekt, connection cable with plug
5%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable wi...
€112,05 €92,60 €106,40 €87,93
 
Push button switch front power lift lowering 48 V, button green, Ø 30 mm
5%
Push button switch front power lift lowering 48 V, button green, Ø 30 mm
Version: Button function, 48 V switching voltage, Green button, make contact, To...
€34,98 €28,91 €33,20 €27,44
 
HELLA Work lamp flood beam H9, 12 V, 65 W, square, upright
HELLA
Work lamp flood beam H9, 12 V, 65 W, square, upright
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Power consum...
€65,50 €54,13
 
PTO shaft end piece 136 mm, 1 3/8 inch 6 grooves, 8 bores
5%
PTO shaft end piece 136 mm, 1 3/8 inch 6 grooves, 8 bores
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150, 160, 170,...
€142,82 €118,03 €135,65 €112,11
 
Showing 121 - 144 of 397

Steyr 6160 CVT parts from drawbar to air conditioning

More than 400 replacement parts fit the Steyr 6160 CVT, produced by makers such as GRANIT, Scharmüller, Sauermann, HELLA and GRAMMER. That covers this model from the drawbar right through to the air conditioning compressor. On a tractor that works long days, it helps to find the small items as well, from a switch to an O-ring, in one place.

Drawbar, frame and hitch

At the back of the 6160 CVT it is all about drawbars, drawbar frames and hitch parts, with Scharmüller and Sauermann among the makers. There are drawbars with a towing eye and frames rated for different loads. If you switch often between a tipping trailer and heavy machinery, you know how quickly the locking on a drawbar starts to rattle. Replace worn locking pins in good time, because play in the guide wears out the frame itself too.

Engine, belt drive and cooling

For the engine there are alternators, multi-rib belts and an air conditioning compressor. You will also find seals, for example for the turbocharger oil return line, thermostat O-rings, sealing rings and gaskets for the exhaust and the water pump, among others.

A tip on the multi-rib belt: take a photo of the belt routing before the old one comes off. With the alternator, air conditioning compressor and water pump on one belt, the path is not always obvious. Spin the tensioner pulley by hand while the belt is off. If it rumbles or has play, replace it at the same time, or the new belt will soon start running off line.

Cab and controls

Inside the 6160 CVT there are push button switches, such as the one for the front PTO with cable and plug, and rocker switches for lifting and lowering from the fender. Air suspended tractor seats from GRAMMER, gas struts for windows and panels and HELLA work lamps round off the workplace.

Choosing the matching part

The rating plate tells you which CVT model you have. That matters, because the model numbers in the CVT series sit close together and each has its own page. If in doubt, copy the number from the old part, for instance from a switch or a seal, and compare it with the parts on this page.

Other Steyr CVT tractors have separate pages listing the parts per model:

The Steyr 6185 CVT and 6230 CVT belong to this series as well. Those and every other model are reached through Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart