Menu
EUR

Steyr 6195 CVT tractor parts & technical data

More than 250 parts are matched to the Steyr 6195 CVT. Among them are trailer couplings, electrics, and steering and front axle components.

283 parts found for Steyr 6195 CVT
Show:
Bush for lower link shaft 66 x 70 x 45 mm Case IH, Steyr
Dimensions: 66 x 70 x 45 mm. More
Dimensions: 66 x 70 x 45 mm.
€120,46 €99,55 €110,82 €91,59
You save 8%
Sealing ring 82 x 6 mm Case IH, Steyr
Dimensions: 82 x 6 mm. More
Dimensions: 82 x 6 mm.
€11,13 €9,19
Windshield frame shock absorber 150 N, 585 mm
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: windscreen. Form: 2. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: windsc...
€37,75 €31,20 €34,73 €28,70
You save 8%
Gas strut door 500 N, 205 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Form: 6. To fit: door. More
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 ...
€35,93 €29,69 €33,06 €27,32
You save 8%
Gas strut for roof hatch 100 N, 275 mm
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof hatch. Form: 6. More
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof h...
€48,67 €40,22 €44,78 €37,01
You save 8%
Spring right fender Case IH, New Holland, Steyr
€46,02 €38,03 €42,34 €34,99
You save 8%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
You save 18%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft. More
Version: Function: position sensor for lifting arm shaft.
€482,97 €399,15 €444,33 €367,22
You save 8%
HELLA Main headlight insert left / right 12V55W H7, dipped beam, glass 90 mm
HELLA
Bulb: 12V55W / H7. Colour: Indicator: white, lens: transparent. Width: 109 mm. Form: Round. Height: 119 mm. Material: Diffusing lens: glass. Dimension... More
Bulb: 12V55W / H7. Colour: Indicator: white, lens: transparent. Width:...
€108,59 €89,74 €104,58 €86,43
You save 4%
Carraro Seal kit front axle Case IH, New Holland, Steyr
€137,63 €113,74 €126,62 €104,64
You save 8%
O-ring Ø 305 x 4 mm Case IH, Steyr
€57,32 €47,37 €52,73 €43,58
You save 8%
Wheel brake cylinder mineral oil Case IH, New Holland, Steyr
€1.638,90 €1.354,46 €1.507,79 €1.246,11
You save 8%
Hand brake cable 980 mm Case IH CVX, New Holland TVT, Steyr CVT
Length: 980 mm. Dimensions: Length = 980 mm. More
Length: 980 mm. Dimensions: Length = 980 mm.
€135,54 €112,02 €124,70 €103,06
You save 8%
Starter ring gear Ø 390/360 mm, 128 teeth Case IH, Steyr, New Holland
Version: Ø 390/360 mm, 128 teeth. More
Version: Ø 390/360 mm, 128 teeth.
€150,52 €124,40 €138,48 €114,45
You save 8%
Borg Warner Fan clutch M30 x 2 L, Ø 152,4 mm Steyr, Case IH
Borg Warner
Thread: M30 x 2 L. PCD: 152,4 mm. More
Thread: M30 x 2 L. PCD: 152,4 mm.
€438,39 €362,31 €368,77 €304,77
You save 16%
Water pump Case IH CVX 140-1195, New Holland T7510-T7550, Steyr
€418,35 €345,74 €384,88 €318,08
You save 8%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm. More
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€103,56 €85,59 €95,28 €78,74
You save 8%
Cylinder head gasket engine Sisu
€82,88 €68,50 €76,25 €63,02
You save 8%
Cover fender
€18,94 €15,65
Adjustment pin stabilizer Case IH, Steyr
€93,93 €77,63 €86,42 €71,42
You save 8%
Pin stabilizer Case IH, Steyr
€64,65 €53,43 €59,48 €49,16
You save 8%
Base plate fender Case IH, Steyr, New Holland
€122,98 €101,64 €113,14 €93,51
You save 8%
Fender bracket left Case IH, Steyr, New Holland
€660,99 €546,27 €608,11 €502,57
You save 8%
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 148 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€899,63 €743,50 €871,22 €720,02
You save 3%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€839,65 €693,93 €812,85 €671,77
You save 3%
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right. More
Length min./max.: 500 - 800 mm. Installation location: right.
€259,22 €214,23 €238,48 €197,09
You save 8%
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecti...
€1.147,51 €948,35
Pressure sensor 50 bar, thread M12 x 1,5, transmission hydraulic plate
Version: Function: gear insertion - hydraulic plate, Thread: M12 x 1.5, Pressure: 50 bar. More
Version: Function: gear insertion - hydraulic plate, Thread: M12 x 1.5...
€963,06 €795,92 €886,02 €732,24
You save 8%
Pressure switch gear insertion, hydraulic filter
Version: Gear insertion, hydraulic filter. More
Version: Gear insertion, hydraulic filter.
€504,24 €416,73
Rotation angle sensor transmission clutch operation servo motor
Version: Function: clutch operation, Rotation angle sensor, reversible PTO shaft (servomotor). More
Version: Function: clutch operation, Rotation angle sensor, reversible...
€499,25 €412,60 €459,31 €379,60
You save 8%
Push button switch front power lift lowering 48 V, button green, Ø 30 mm
Version: Button function, 48 V switching voltage, Green button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal seri... More
Version: Button function, 48 V switching voltage, Green button, make c...
€36,50 €30,17 €33,58 €27,75
You save 8%
LED work lights floodlight 28 W, 2692 lm, Ø 84 x 64 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: -. Dimensions W x H x D: Ø 84 x 64 mm. Mounting... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€68,74 €56,81 €63,24 €52,27
You save 8%
LED headlight dipped beam 118,1 x 112,8 x 114,3 mm, H7
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam. Dimensions W x H x D: 118,1 x 112,,... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€140,39 €116,02 €129,16 €106,74
You save 8%
Cobo Work lamp H3 left 55 / 70 W, 158 x 96 x 85 mm, 12/24 V
Cobo
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Installation location: Left. Nominal voltage: 12 / 24 V. Power consumption: 55 / ... More
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. I...
€110,99 €91,73 €102,11 €84,39
You save 8%
HELLA Rear light right hole spacing 110 mm, 12 V
HELLA
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 mm. Form: Rectangular. Height: 140 mm. Hole spacing: 110 mm. Housing: ... More
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. W...
€94,42 €78,03 €72,75 €60,13
You save 23%
Cobo Indicator/position light oval PY21W, R5W left
Cobo
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. Cable length: 1200 mm. Type: Bulb. More
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation locatio...
€112,58 €93,04 €103,57 €85,60
You save 8%
Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm...
€229,33 €189,53 €210,98 €174,37
You save 8%
Showing 193 - 240 of 283

Parts for the Steyr 6195 CVT

Lifting the bonnet on a Steyr 6195 CVT should be easy, and if it is not, the gas struts are worn. That is one of many small jobs covered by this page, which lists more than 250 parts for the 6195 CVT from GRANIT, Scharmüller, HELLA, GRAMMER and Cobo.

Bonnet struts and engine seals

The heavy bonnet is held up by gas struts. If it opens sluggishly or sinks on its own, replace both struts at the same time, and never work under a bonnet resting on tired struts. For the engine there are gaskets, including one for the water pump, along with seals, sealing rings and O-rings, for example for the oil filler cap.

Belt drive and charging

Alternators and multi-rib belts keep the charging system working. Replace a belt that shows cross cracks or glazed flanks, and check the tensioner pulley at the same time. A tensioner that rattles or runs rough will ruin a new belt quickly.

Dashboard switches

Rocker switches for the dashboard, such as the one for the front work lights, and push button switches, for instance for front linkage lowering, are available too. Before replacing a switch, check the plug at the back. Vibration can work it loose and cause exactly the same fault. A shot of contact spray on the connector sometimes cures it. Only when the switch itself sticks or no longer clicks cleanly is a new one needed.

Cab and rear hitch

Air suspended tractor seats and work lamps, including HELLA flood beams, cover the cab. At the rear there are drawbars, adapter plates, automatic hitches and top drawbars. Measure rail width and hole pattern on the frame currently fitted. An automatic hitch saves time when trailers change several times a day, while a plain drawbar with a towing eye covers routine haulage. Always renew a worn locking pin when the hitch is replaced.

Identifying the correct part

The type plate shows the model and serial number. The reference number on the old part decides it, so compare it with the product description. For switches, also check the symbol and function, and for a multi-rib belt the number of ribs and the length of the old belt.

The other tractors in the Steyr CVT series each have their own page with the parts for that type:

The 6160 CVT, the 6230 CVT and all other Steyr tractors are reachable through the overview of Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart