Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Steyr 9125 tractor parts & technical data

Need parts for a Steyr 9125 from the 9100 series? Choose from more than 300 items, such as trailer couplings, lighting, and steering and front axle parts.

331 parts found for Steyr 9125
Show:
Pin lower arm Carraro front axle 145706 Case IH, Renault, Steyr
€559,15 €462,11 €514,42 €425,14
You save 8%
Thrust washer Case IH, Renault, Steyr
€69,70 €57,60 €64,12 €53,00
You save 8%
Bush lower arms Case IH, New Holland, Steyr
€36,17 €29,89 €33,28 €27,50
You save 8%
Bush rotary housing and steering cylinder Case IH, Renault, Steyr
Nut steering cylinder and housing CARRARO front axle 642489
€33,52 €27,70 €30,84 €25,49
You save 8%
Universal joint 30,2 x 82 mm, maintenance-free
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Main...
€122,70 €101,41 €112,88 €93,29
You save 8%
Master brake cylinder piston Ø 7/8", Knott brake, mineral oil
€370,96 €306,58 €341,28 €282,05
You save 8%
Internal plate powershift 1,5 mm thick, inner 70,7 mm, outer 110,9 mm
Version: Thickness: 1.5 mm, Inner: 70.7 mm, Outer: 110.9 mm, 36 teeth. More
Version: Thickness: 1.5 mm, Inner: 70.7 mm, Outer: 110.9 mm, 36 teeth.
€13,45 €11,12
Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 23 mm. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€121,09 €100,07 €111,40 €92,07
You save 8%
Oil cooler Case IH CS 100 - CS 150, Steyr 9105-9145
€3.190,59 €2.636,85 €2.935,34 €2.425,90
You save 8%
Gasket exhaust turbocharger New Holland, Steyr, Case IH
€79,60 €65,79 €73,23 €60,52
You save 8%
Gasket cooling channel, thermostat housing CS 68, 75, engine Sisu 320D
Gasket assembly cover CS 68-150, CVX 120-1190
€36,49 €30,16 €33,57 €27,74
You save 8%
Radiator cap Ø 58 mm, height 25 mm, 0,7 bar
Neck Ø: 58 mm. Height: 25 mm. Opening pressure: 0,7 bar. More
Neck Ø: 58 mm. Height: 25 mm. Opening pressure: 0,7 bar.
€9,88 €8,16
V-belt set AV13 x 1400LE Massey Ferguson, Case IH, Steyr
Dimensions: AV13 x 1400LE. Length: 1400 mm. Reference no.: S.11172. More
Dimensions: AV13 x 1400LE. Length: 1400 mm. Reference no.: S.11172.
€24,30 €20,08
Radiator hose, bottom Ø 45 mm Case IH CS 100-150, Steyr 9105-9145
€177,63 €146,80 €163,42 €135,06
You save 8%
Tension spring engine brake Case IH, Steyr
Description: For engine brake. More
Description: For engine brake.
€8,36 €6,91
Optibelt V-belt Massey Ferguson 3120, 5425-5460, 6180, 6445, 6455
€36,11 €29,84 €33,22 €27,46
You save 8%
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€44,86 €37,07 €41,27 €34,11
You save 8%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm. More
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
You save 8%
Foot throttle cable A 1370 mm, B 1125 mm Case IH, Steyr
A: 1370 mm. B: 1125 mm. More
A: 1370 mm. B: 1125 mm.
€60,04 €49,62 €55,24 €45,65
You save 8%
Hand throttle cable A 3400 mm, B 3115 mm Case IH, Steyr
A: 3400 mm. B: 3115 mm. More
A: 3400 mm. B: 3115 mm.
€95,24 €78,71 €87,62 €72,41
You save 8%
Bolt set 4de steering valve 3x M8 x 220 Steyr
Technical data: 3x M8 x 220. More
Technical data: 3x M8 x 220.
€51,52 €42,58 €47,40 €39,17
You save 8%
Bowden cable 1ste steering valve 980 mm Case IH, Steyr
€255,09 €210,82 €234,68 €193,95
You save 8%
Windshield frame shock absorber or hood 500 N, 585 mm, stroke 252 mm
suitable for: Frontscheibe oder Motorhaube. Newtons: 500. A: 585 mm. B: 315 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 252 mm. To fit... More
suitable for: Frontscheibe oder Motorhaube. Newtons: 500. A: 585 mm. B...
€71,35 €58,97 €65,64 €54,25
You save 8%
Bush for lower link shaft 66 x 70 x 45 mm Case IH, Steyr
Dimensions: 66 x 70 x 45 mm. More
Dimensions: 66 x 70 x 45 mm.
€120,46 €99,55 €110,82 €91,59
You save 8%
Yoke Steyr 9105-9145
€181,15 €149,71 €166,66 €137,73
You save 8%
Pin 28 x 95 mm Steyr Series 6135 CVT - 9145, CVT 120-170
Dimensions: 28 x 95 mm. More
Dimensions: 28 x 95 mm.
€70,96 €58,64 €65,28 €53,95
You save 8%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Gas strut door 500 N, 205 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Form: 6. To fit: door. More
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 ...
€35,93 €29,69 €33,06 €27,32
You save 8%
Gas strut for roof hatch 100 N, 275 mm
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof hatch. Form: 6. More
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof h...
€48,67 €40,22 €44,78 €37,01
You save 8%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
You save 18%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft. More
Version: Function: position sensor for lifting arm shaft.
€482,97 €399,15 €444,33 €367,22
You save 8%
Rotation angle sensor transmission clutch operation servo motor
Version: Function: clutch operation, Rotation angle sensor, reversible PTO shaft (servomotor). More
Version: Function: clutch operation, Rotation angle sensor, reversible...
€499,25 €412,60 €459,31 €379,60
You save 8%
Push button switch Power shuttle reverse gear, green
Version: Button function, Green button, Connection cable with plug. More
Version: Button function, Green button, Connection cable with plug.
€167,77 €138,65
Main headlight insert left / right 12V55W H4, lens 168 x 106 mm
Bulb: 12V55W / H4. Version: H4 headlight with full and dipped beam, without position light, For flush mounting, Lens: 168 x 106 mm. More
Bulb: 12V55W / H4. Version: H4 headlight with full and dipped beam, wi...
€56,63 €46,80 €52,10 €43,06
You save 8%
Sealing ring 115 x 154 x 5,5 mm Ford, Case IH, Steyr, New Holland
Showing 193 - 240 of 331

Steyr 9125 parts from belt drive to drawbar

There are more than 300 Steyr 9125 parts on this page, made by GRANIT and by brands such as Scharmüller, HELLA, MAHLE and GRAMMER. They run from the belts at the front of the engine to the hitch at the back.

The 9125 often works with heavy trailers and front loaders. That puts extra strain on the steering, the linkage and the electrical controls, which is where many of the parts on this page come in.

Engine front and charging

V-belts, including one for the air conditioning, and alternators with a fixed flange and pulley sit at the front of the engine. There is a gasket for the water pump and a seal for the fuel feed pump. A V-belt that squeals when you pull away or switch on the aircon is usually too slack or glazed on its flanks. Fit a new one, then check the tension again after a few hours of work, because a fresh belt stretches a little at first.

Hitch, steering and seals

For the rear there are drawbars with a K80 ball on a rail and adapter plates. Ball joints and bushes cover the steering and linkage, while O-rings and sealing rings keep oil and coolant where they belong, for example a sealing ring that is used on Case IH and Steyr tractors.

Switches, lights and cab

The cab of the 9125 has plenty of switches that wear over time. You will find push buttons, such as the yellow one for lifting and lowering, and rocker switches in the dashboard, for instance for the front work lights. Work lamps are here too, among them a corner light with a flood beam. A tractor seat and gas struts for the hood complete the list. If a switch only works when you press harder, check the connector behind it before replacing the switch. Contact spray often does the job.

Making sure it fits

Check the type plate to confirm the machine is a 9125. If you still have the old part, look for a reference number on it. With gaskets and sealing rings that look alike, that number is often the only reliable way to tell them apart. Within the Steyr range, the 9125 is part of the 9100 line. The other types in that series each have their own page: Steyr 9105, Steyr 9115 and Steyr 9145. To browse every tractor of the make, go to Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart