Menu
EUR

Steyr 9125 tractor parts & technical data

Need parts for a Steyr 9125 from the 9100 series? Choose from more than 300 items, such as trailer couplings, lighting, and steering and front axle parts.

331 parts found for Steyr 9125
Show:
GRANIT Master brake cylinder Case IH, Steyr, New Holland
GRANIT
Reference no.: 133135155, 133135418. More
Reference no.: 133135155, 133135418.
€134,35 €111,03 €127,60 €105,45
You save 5%
Scharmüller Drawbar bracket 200 x 120 mm, bore M16, inner width 124 mm, black
Scharmüller
Hole pattern: 200 x 120 mm. Hole: M16 mm. Colour: Black. Internal width: 124 mm. Version: Brackets. Category: Drawbar. More
Hole pattern: 200 x 120 mm. Hole: M16 mm. Colour: Black. Internal widt...
€287,01 €237,20 €253,80 €209,75
You save 12%
Gasket cooling channel, thermostat housing CS 68, 75, engine Sisu 320D
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
You save 5%
GRAMMER Tractor seat Maximo Basic MSG85/721
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 480 mm. Joystick console: Optional. S... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.305,84 €1.079,21 €1.240,50 €1.025,21
You save 5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€28,25 €23,35
Scharmüller Drawbar frame 330/25/32, 2500 kg, black
Scharmüller
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 (MK1), Agrotron 80-165 (MK2/MK3), Agrotron 80-180.7, Agrotron M, Agrotron TTV; D... More
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 ...
€1.229,36 €1.016,00 €1.087,20 €898,51
You save 12%
GRANIT Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
GRANIT
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm...
€230,76 €190,71 €208,75 €172,52
You save 10%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
Scharmüller Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Scharmüller
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Dc-value (kN): 106 | D-value (... More
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole...
€578,40 €478,02
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€119,54 €98,79 €113,55 €93,84
You save 5%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€489,63 €404,65 €306,00 €252,89
You save 38%
GRANIT Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
€302,23 €249,78 €287,10 €237,27
You save 5%
GRANIT Flange Carraro front axle 145706
€146,77 €121,30 €139,40 €115,21
You save 5%
GRANIT Bush lower arms Case IH, New Holland, Steyr
€34,67 €28,65 €32,90 €27,19
You save 5%
Tank cap bayonet connection with ventilation, tank collar Ø 83 mm
€78,53 €64,90 €74,60 €61,65
You save 5%
Return line Case IH, Steyr
€531,07 €438,90 €504,50 €416,94
You save 5%
GRANIT Bowden cable 2de steering valve 1040 mm Case IH, Steyr
€283,20 €234,05 €269,00 €222,31
You save 5%
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€17,60 €14,55
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
Showing 49 - 72 of 331

Steyr 9125 parts from belt drive to drawbar

There are more than 300 Steyr 9125 parts on this page, made by GRANIT and by brands such as Scharmüller, HELLA, MAHLE and GRAMMER. They run from the belts at the front of the engine to the hitch at the back.

The 9125 often works with heavy trailers and front loaders. That puts extra strain on the steering, the linkage and the electrical controls, which is where many of the parts on this page come in.

Engine front and charging

V-belts, including one for the air conditioning, and alternators with a fixed flange and pulley sit at the front of the engine. There is a gasket for the water pump and a seal for the fuel feed pump. A V-belt that squeals when you pull away or switch on the aircon is usually too slack or glazed on its flanks. Fit a new one, then check the tension again after a few hours of work, because a fresh belt stretches a little at first.

Hitch, steering and seals

For the rear there are drawbars with a K80 ball on a rail and adapter plates. Ball joints and bushes cover the steering and linkage, while O-rings and sealing rings keep oil and coolant where they belong, for example a sealing ring that is used on Case IH and Steyr tractors.

Switches, lights and cab

The cab of the 9125 has plenty of switches that wear over time. You will find push buttons, such as the yellow one for lifting and lowering, and rocker switches in the dashboard, for instance for the front work lights. Work lamps are here too, among them a corner light with a flood beam. A tractor seat and gas struts for the hood complete the list. If a switch only works when you press harder, check the connector behind it before replacing the switch. Contact spray often does the job.

Making sure it fits

Check the type plate to confirm the machine is a 9125. If you still have the old part, look for a reference number on it. With gaskets and sealing rings that look alike, that number is often the only reliable way to tell them apart. Within the Steyr range, the 9125 is part of the 9100 line. The other types in that series each have their own page: Steyr 9105, Steyr 9115 and Steyr 9145. To browse every tractor of the make, go to Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart