Menu
EUR

Steyr 9125 tractor parts & technical data

Need parts for a Steyr 9125 from the 9100 series? Choose from more than 300 items, such as trailer couplings, lighting, and steering and front axle parts.

331 parts found for Steyr 9125
Show:
GRANIT Starter switch 12 / 24 V, 6 blade terminals, M26 x 1,5, 2 keys
GRANIT
Version: Operating voltage: 12 V / 24 V With 6 blade terminals (6.3 x 0.8 / 9.5 x 1.2 mm) Locking cylinder with protection against water 2 keys (type ... More
Version: Operating voltage: 12 V / 24 V With 6 blade terminals (6.3 x ...
€70,02 €57,87 €66,50 €54,96
You save 5%
MAHLE Alternator 14 V, 120 A, flange 50,8 mm Case IH, John Deere, Laverda, Steyr
MAHLE
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mounting L / d / R (mm): 50,8 / 10,2 / 86,0 | Belt width (mm) / type: - | Nominal v... More
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mou...
€520,71 €430,34 €488,15 €403,43
You save 6%
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Additional information: Dust-tight, with fan, with W con... More
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (m...
€201,03 €166,14 €190,95 €157,81
You save 5%
FEBI Engine oil filter Ø 108 mm, height 144,2 mm, thread M24 x 1,5
€34,35 €28,39 €14,07 €11,63
You save 59%
Carraro Seal kit brake cylinder Case IH CS 100-150, Steyr 9105-9145
€163,11 €134,80 €154,95 €128,06
You save 5%
Ball joint 263 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M24 x 1,5
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€76,67 €63,36 €72,80 €60,17
You save 5%
Carraro Combi ring 48 x 65 x 11 mm Case IH, New Holland, Steyr
Carraro
Inner Ø: 48 mm. Outer Ø: 65 mm. Thickness: 11 mm. More
Inner Ø: 48 mm. Outer Ø: 65 mm. Thickness: 11 mm.
€20,15 €16,65
Wabco Antifreeze pump 13 bar, 0,2 cm³, without control connection 4
Wabco
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 bar. Delivery volume: 0.2 cm³. Contents: 500 ml. Version: • Prevents equipment... More
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 b...
€288,66 €238,56 €274,20 €226,61
You save 5%
Master brake cylinder piston Ø 7/8", Knott brake, mineral oil
€148,59 €122,80 €141,15 €116,65
You save 5%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Wheel brake cylinder Sirmac brakes, mineral oil Case IH, Steyr
€806,16 €666,25 €765,85 €632,93
You save 5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
You save 5%
GRANIT Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
GRANIT
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 23 mm. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€116,04 €95,90 €110,20 €91,07
You save 5%
GRANIT Radiator hose, bottom Ø 45 / 55 mm Case IH, Steyr
GRANIT
Inner Ø: 45 / 55 mm. More
Inner Ø: 45 / 55 mm.
€64,28 €53,12 €61,00 €50,41
You save 5%
Radiator hose, bottom Ø 45 mm Case IH CS 100-150, Steyr 9105-9145
€170,22 €140,68 €161,70 €133,64
You save 5%
GRANIT Radiator hose, top Ø 40 / 45 mm Case IH, Steyr
GRANIT
Inner Ø: 40 / 45 mm. More
Inner Ø: 40 / 45 mm.
€126,19 €104,29 €119,85 €99,05
You save 5%
Showing 193 - 216 of 331

Steyr 9125 parts from belt drive to drawbar

There are more than 300 Steyr 9125 parts on this page, made by GRANIT and by brands such as Scharmüller, HELLA, MAHLE and GRAMMER. They run from the belts at the front of the engine to the hitch at the back.

The 9125 often works with heavy trailers and front loaders. That puts extra strain on the steering, the linkage and the electrical controls, which is where many of the parts on this page come in.

Engine front and charging

V-belts, including one for the air conditioning, and alternators with a fixed flange and pulley sit at the front of the engine. There is a gasket for the water pump and a seal for the fuel feed pump. A V-belt that squeals when you pull away or switch on the aircon is usually too slack or glazed on its flanks. Fit a new one, then check the tension again after a few hours of work, because a fresh belt stretches a little at first.

Hitch, steering and seals

For the rear there are drawbars with a K80 ball on a rail and adapter plates. Ball joints and bushes cover the steering and linkage, while O-rings and sealing rings keep oil and coolant where they belong, for example a sealing ring that is used on Case IH and Steyr tractors.

Switches, lights and cab

The cab of the 9125 has plenty of switches that wear over time. You will find push buttons, such as the yellow one for lifting and lowering, and rocker switches in the dashboard, for instance for the front work lights. Work lamps are here too, among them a corner light with a flood beam. A tractor seat and gas struts for the hood complete the list. If a switch only works when you press harder, check the connector behind it before replacing the switch. Contact spray often does the job.

Making sure it fits

Check the type plate to confirm the machine is a 9125. If you still have the old part, look for a reference number on it. With gaskets and sealing rings that look alike, that number is often the only reliable way to tell them apart. Within the Steyr range, the 9125 is part of the 9100 line. The other types in that series each have their own page: Steyr 9105, Steyr 9115 and Steyr 9145. To browse every tractor of the make, go to Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart