Menu
EUR

Steyr CVT 130 tractor parts & technical data

Steyr CVT 130 parts, more than 200 of them, are listed on this page. Trailer couplings, lighting and electrics are matched to this CVT series tractor.

194 parts found for Steyr CVT 130
Show:
HELLA Rear light right hole spacing 110 mm, 12 V
23%
HELLA
Rear light right hole spacing 110 mm, 12 V
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 ...
€95,00 €78,51 €72,75 €60,12
 
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
40%
MAHLE
Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | A...
€525,90 €434,63 €313,00 €258,68
 
GRANIT Multifunction switch 2 lever, cable with 2 plugs
5%
GRANIT
Multifunction switch 2 lever, cable with 2 plugs
Version: 2 levers: forwards/reverse/neutral, For indicator light, lights, horn, ...
€1.128,33 €932,50 €1.071,90 €885,87
 
MAHLE Air conditioning compressor 12 V, R 134a, pulley-Ø 152 mm, 2 grooves, Rotolock
38%
MAHLE
Air conditioning compressor 12 V, R 134a, pulley-Ø 152 mm, 2 grooves, Rotolock
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quantity (ccm)...
€653,40 €540,00 €408,35 €337,48
 
Carraro Pivot bush Carraro front axle 115 x 125 x 44 mm
5%
Carraro
Pivot bush Carraro front axle 115 x 125 x 44 mm
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 44 mm.
€69,58 €57,50 €66,10 €54,63
 
Wabco Reservoir for antifreeze pump
5%
Wabco
Reservoir for antifreeze pump
€106,94 €88,38 €101,55 €83,93
 
Seal brake reservoir Case IH, Steyr
Seal brake reservoir Case IH, Steyr
€10,85 €8,97
 
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
5%
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
€314,60 €260,00 €298,85 €246,98
 
Seal for return lubrication line
Seal for return lubrication line
€10,45 €8,64
 
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
5%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€99,24 €82,02 €94,25 €77,89
 
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
5%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
 
GRANIT Handle right and left Case IH, Steyr
5%
GRANIT
Handle right and left Case IH, Steyr
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
 
Gas strut for roof hatch 100 N, 275 mm
5%
Gas strut for roof hatch 100 N, 275 mm
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof hatch. Form...
€46,65 €38,55 €44,30 €36,61
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
 
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
 
Pressure switch air conditioning with female thread, 2 blade connections
10%
Pressure switch air conditioning with female thread, 2 blade connections
Version: With female thread, 2 blade terminals.
€252,59 €208,75 €228,50 €188,84
 
PTO shaft end piece 136 mm, 1 3/8 inch 6 grooves, 8 bores
5%
PTO shaft end piece 136 mm, 1 3/8 inch 6 grooves, 8 bores
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150, 160, 170,...
€142,82 €118,03 €135,65 €112,11
 
GRANIT External plate PTO clutch 3 mm, inner 135 mm, outer 193,5 mm
5%
GRANIT
External plate PTO clutch 3 mm, inner 135 mm, outer 193,5 mm
Version: Thickness: 3 mm Inner: 135 mm Outer: 193.5 mm
€104,04 €85,98 €98,80 €81,65
 
Rocker switch dashboard sprung front axle, PTO shaft
5%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung fr...
€92,65 €76,57 €88,00 €72,73
 
GRANIT Seal PU 55 x 70 x 7 mm
GRANIT
Seal PU 55 x 70 x 7 mm
€12,45 €10,29
 
Showing 49 - 72 of 194

Steyr CVT 130 parts

Seeping seals, an electrical fault on the dashboard and a worn hitch are the typical jobs on a hard working Steyr CVT 130. This page brings together more than 200 replacement parts for the tractor, from suppliers including GRANIT, Scharmüller, GRAMMER, HELLA and Walterscheid.

Switches on the CVT 130

If the front work lights have stopped working, the rocker switch on the dashboard is a likely suspect. Contact switches and pressure switches are listed too. When a pressure switch reports a fault while the pressure is fine, check the plug and wiring first, since the problem is often there rather than in the switch.

Hitching, cab, seals and choosing parts

For the rear there are drawbars, automatic hitches, a top drawbar and the Piton Fix system, plus a height adjustable adapter plate for setting the coupling at the right level. Inside, an air suspended GRAMMER seat makes long days easier, and gas struts keep doors and windows where they should be.

On the Piton Fix and the automatic hitch, look at the locking pin and the jaw regularly. A pin with a worn edge or a jaw with play causes knocks when pulling away. When a gas strut can no longer hold a door or window, fit the new one with the rod facing down.

A water pump gasket, O-rings for the feed pump, sealing rings and a seal for the lubrication line cover the usual leak points, and repair kits are available as well for renewing several seals in one go. Never reuse an old O-ring. Clean the groove, give the new ring a light coat of clean oil and make sure it does not twist as it goes in.

The identification plate confirms that you are working on a CVT 130. For switches, compare the symbol and the number of terminals. For O-rings and sealing rings, use the size marked on the old one or measure it. A reference number on the removed part is always a reliable way to check against the product information. For drawbars and hitches, measure the rail width and coupling pin diameter as well.

Other CVT tractors

These related models each have a page of their own, which helps if you run more than one Steyr:

The 6185 CVT and 6230 CVT are part of the same line. For every other model from the brand, visit Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart