Menu
EUR

Steyr CVT 170 tractor parts & technical data

This page holds more than 200 parts for the Steyr CVT 170 from the CVT series, such as trailer couplings, steering and front axle parts and lighting.

202 parts found for Steyr CVT 170
Show:
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€119,54 €98,79 €113,55 €93,84
You save 5%
Cover upper arm Carraro front axle 642489
€120,52 €99,60 €114,45 €94,59
You save 5%
Universal joint 30,2 x 83 / 88 mm, maintenance-free
€166,62 €137,70 €158,25 €130,79
You save 5%
GRANIT Ball joint 265 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M24 x 1,5
GRANIT
A: 265 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 265 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€91,29 €75,45 €86,70 €71,65
You save 5%
GRANIT Master brake cylinder Case IH, Steyr, New Holland
GRANIT
Reference no.: 133135155, 133135418. More
Reference no.: 133135155, 133135418.
€134,35 €111,03 €127,60 €105,45
You save 5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
You save 5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
GRANIT Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
GRANIT
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm...
€230,76 €190,71 €208,75 €172,52
You save 10%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
GRANIT Flange Carraro front axle 145706
€146,77 €121,30 €139,40 €115,21
You save 5%
Thrust washer Case IH, Renault, Steyr
€66,79 €55,20 €63,45 €52,44
You save 5%
Return line Case IH, Steyr
€531,07 €438,90 €504,50 €416,94
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
GRANIT Pressure switch gear insertion, hydraulic filter
GRANIT
Version: Gear insertion, hydraulic filter. More
Version: Gear insertion, hydraulic filter.
€504,20 €416,69
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines More
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines
€89,03 €73,58 €84,55 €69,88
You save 5%
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.220,60 €1.835,21
GRANIT Tension spring engine brake Case IH, Steyr
GRANIT
Description: For engine brake. More
Description: For engine brake.
€8,30 €6,86
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€889,04 €734,74 €748,81 €618,85
You save 16%
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecti...
€1.195,30 €987,85 €1.057,10 €873,64
You save 12%
HELLA Rear light right hole spacing 110 mm, 12 V
HELLA
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 mm. Form: Rectangular. Height: 140 mm. Hole spacing: 110 mm. Housing: ... More
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. W...
€95,00 €78,51 €72,75 €60,12
You save 23%
Showing 25 - 48 of 202

Steyr CVT 170 parts for the hitch, the cab and the engine

A CVT 170 piles on hours, and hours mean wear in the same few places: the hitch, the seat and switches that get pressed thousands of times. This page holds more than 200 parts for this Steyr, from GRANIT, Scharmüller, GRAMMER, HELLA and Walterscheid.

Hitching up

For the rear there are drawbars, top drawbars, Piton Fix hooks, automatic hitches, loose pins and adapter plates for the hitch rail. An adapter plate makes it easy to change systems, for example from an automatic hitch to a piton for a heavy trailer.

A tip for the automatic hitch: grease the coupling pin and the jaw regularly, and after every hook-up check that the pin has dropped all the way. A pin that hangs halfway because of dirt or rust is a classic start to trouble on the road. A quick hose-down after a day in the mud saves a lot of that.

Seat and switches in the cab

For the cab there are tractor seats, including an air suspended GRAMMER seat, and gas struts for windows and hatches. The dashboard carries rocker switches, for instance for the front work lights, and contact switches and pressure switches are on offer too. If a lamp stays dark, check the fuse and the bulb before replacing the switch. If the switch no longer clicks or feels loose, it is the culprit itself.

When an air suspended seat slowly sinks or no longer rises to height, the cause is often the air bag, the valve or the compressor connection. Check those points before replacing the whole seat. If the base is worn out or the cover torn, a new seat is usually the simplest answer.

Engine seals

For the engine there is a water pump gasket for the Sisu unit, an O-ring for the feed pump, sealing rings and seals, including one for the lubrication line.

The right part for your CVT 170

Type and chassis number are on the type plate. That number helps when the equipment differs within the CVT 170, for example in the cab or the hitch system. For seals the number on the old part is often even clearer.

Steyr's CVT family is a big one. If you have several of its tractors, each type has its own page, such as the Steyr 6145 CVT, Steyr 6150 CVT, Steyr 6165 CVT, Steyr 6175 CVT, Steyr 6195 CVT and Steyr 6240 CVT. Pick the parts for that tractor there. For the remaining Steyr ranges, start from the brand overview at Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart