Menu
EUR

John Deere 6125R tractor parts & technical data

Matched to the John Deere 6125R from the 6R series: more than 250 parts covering trailer couplings, lighting and electrics, neatly sorted by product group.

288 parts found for John Deere 6125R
Show:
Stabilus Gas strut door 350 N, 245 mm, stroke 69 mm John Deere
10%
Stabilus
Gas strut door 350 N, 245 mm, stroke 69 mm John Deere
To fit as: John Deere Door
€59,73 €49,36 €54,00 €44,63
 
CBM Lift arm category 3, 1011 mm, right John Deere
5%
CBM
Lift arm category 3, 1011 mm, right John Deere
Category: 3 | Dimensions (mm): L: 1011 mm | Installation location: Right
€580,97 €480,14 €551,90 €456,12
 
Scharmüller Drawbar frame rail 390 mm, guide 32 mm, 117 kN, 4000 kg
Scharmüller
Drawbar frame rail 390 mm, guide 32 mm, 117 kN, 4000 kg
Load capacity (kg): 4000 | Category: Lagerböcke | Guide width (mm): 32 | Version...
€1.817,75 €1.502,27
 
Connector head M16 x 1,5 red, supply line, vehicle
Connector head M16 x 1,5 red, supply line, vehicle
Application: Vehicle | Connection thread: M16 x 1.5 | Version: Red, supply line ...
€23,80 €19,67
 
Sauermann Wear plate trailer coupling HS 1710-1KUD/3KUD
5%
Sauermann
Wear plate trailer coupling HS 1710-1KUD/3KUD
€172,30 €142,40 €163,65 €135,25
 
Sauermann Locking bolt set trailer coupling 330 mm rail width
5%
Sauermann
Locking bolt set trailer coupling 330 mm rail width
€205,09 €169,50 €194,80 €160,99
 
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
5%
Sauermann
Verstelplaat with handle trailer coupling 330 mm rail width
€240,79 €199,00 €228,75 €189,05
 
Sauermann Top pin kit trailer coupling Ø 25 x 107 mm John Deere
5%
Sauermann
Top pin kit trailer coupling Ø 25 x 107 mm John Deere
€109,14 €90,20 €103,65 €85,66
 
Sauermann Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
10%
Sauermann
Hold-down device trailer coupling 131 x 85,5 mm, Ø 25,5 mm John Deere
€455,98 €376,84 €412,55 €340,95
 
HELLA LED work light flood beam 30 W, 12 / 24 V, 2500 lm John Deere
HELLA
LED work light flood beam 30 W, 12 / 24 V, 2500 lm John Deere
Light function: Close-range illumination | Housing colour: Black | Effective lum...
€232,25 €191,94
 
MAHLE Alternator 14 V, 200 A, flange 56 mm, John Deere
38%
MAHLE
Alternator 14 V, 200 A, flange 56 mm, John Deere
Belt width (mm) / type: - | Flange size (mm): 56,0 | Additional information: Com...
€673,37 €556,50 €420,85 €347,81
 
Alternator 14 V, 150 A, flange 55,8 mm
5%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 |...
€206,56 €170,71 €196,20 €162,15
 
HELLA Alternator 14 V / 150 A, without belt pulley, 7,25 kg
20%
HELLA
Alternator 14 V / 150 A, without belt pulley, 7,25 kg
Nominal values (V / A): 14 / 150 | Charging current (A): 150 | Nominal voltage (...
€622,63 €514,57 €500,55 €413,68
 
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
20%
HELLA
Alternator 14 V, 120 A, without belt pulley John Deere
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Char...
€515,56 €426,08 €414,51 €342,57
 
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
5%
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32 mm
€361,75 €298,97 €343,65 €284,01
 
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, clockwise, mounting Ø 89 mm
20%
HELLA
Starter motor 12 V, 3,0 kW, 11 teeth, clockwise, mounting Ø 89 mm
€533,07 €440,55 €428,55 €354,17
 
GRANIT Ball joint 145 mm, M22 x 1,5, M24 x 1,5, taper 24,65 - 28,53 mm
5%
GRANIT
Ball joint 145 mm, M22 x 1,5, M24 x 1,5, taper 24,65 - 28,53 mm
A: 145 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,65 mm. F: 28,53 mm. Taper: 24...
€60,06 €49,64 €57,00 €47,11
 
Ball joint, complete 350 mm, M24 x 1,5, M22 x 1,5, taper 27 - 30,5 mm
5%
Ball joint, complete 350 mm, M24 x 1,5, M22 x 1,5, taper 27 - 30,5 mm
A: 350 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 27 mm. F: 30,5 mm. Taper: 27 - 3...
€210,70 €174,13 €200,15 €165,41
 
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
 
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
 
Thermostat Ø 73 mm John Deere
Thermostat Ø 73 mm John Deere
€83,00 €68,60
 
Cooling fan Ø 600 mm John Deere 6020-7530
5%
Cooling fan Ø 600 mm John Deere 6020-7530
€285,49 €235,94 €271,20 €224,13
 
Filler cap for engine cooling
5%
Filler cap for engine cooling
€39,23 €32,42 €37,25 €30,79
 
Showing 169 - 192 of 288

John Deere 6125R parts

The oil pressure warning comes on. Is the engine really short of pressure, or has the sender simply failed? Questions like that are behind a lot of the work on a 6125R. This page holds more than 250 replacement parts that fit the John Deere 6125R, from GRANIT, ROCKINGER, Scharmüller, Sauermann and Walterscheid.

Test before you replace the oil pressure sensor

Never swap an oil pressure sensor on a hunch. Remove it, screw in a mechanical gauge for the time being and read the pressure at idle and at higher revs. If the reading is healthy, the fault lies in the sensor or the wiring, and a new sensor will cure it. If the pressure really is low, the problem is deeper inside the engine. Use a new seal when refitting.

Engine and electrical parts

  • engine oil pressure sensors, oil and fuel line O-rings and oil seals
  • balancer shaft bushes
  • alternators and micro relays
  • LED work lights
  • gas struts for the cab window or bonnet

Gas struts should always be changed in pairs. A new strut working next to a weak old one ends up carrying the whole load and wears out early.

Gas struts lose pressure gradually and cold weather shows it first. A window that will not stay up on a frosty morning is the usual sign. Fit new struts the right way round, which for most is with the rod pointing down.

The hitch end

At the rear there are ball-type drawbars, drawbar frames, flange hitches and trailer couplings, together with forced steering parts with a lock and connector heads for the trailer air brakes.

Balancer shaft bushes

The engine balancer shaft runs in bushes that wear over time. A knock, unfamiliar vibration or oil pressure that drops noticeably when hot can all point that way. Replacing them is a workshop job because part of the engine has to come apart. While it is open, renew the O-rings and seals in the same go, which saves a second strip-down and a second oil fill.

Finding the exact part

Model and serial number are on the type plate. For sensors, relays and alternators, the reference number on the old part is the quickest route to the right replacement. The 6125R belongs to the 6R series, but parts from other 6R models do not automatically fit, so each has a page of its own. The John Deere 6150R is part of the same range.

For every other model, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart