Menu
EUR

John Deere 7280R tractor parts & technical data

More than 110 parts in our range fit the John Deere 7280R from the 7R series. Start with trailer couplings, lighting and electrics, where the choice is widest.

117 parts found for John Deere 7280R
Show:
Pump screenwash tank 12 V, intake-Ø 6,3 mm, press-Ø 6,3 mm
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system. Voltage: 12 V. Connection type: 2 x 6,3. Operating mode: electric. More
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system...
€35,49 €29,33 €32,65 €26,98
You save 8%
Scharmüller Flange hitch automatic 38 mm, 140 x 80 mm, M16, 2000 kg, 82,4 kN
Scharmüller
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Hole: M16 mm. No. of holes: 4. Colour: Black. Description: ... More
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 k...
€1.046,60 €864,96 €960,31 €793,64
You save 8%
PROBOSS Passenger seat brown, seat cushion 360 mm John Deere
PROBOSS
Colour: Brown | To fit: John Deere More
Colour: Brown | To fit: John Deere
€539,65 €445,99 €426,65 €352,60
You save 21%
ROCKINGER Adaptor plate rail width 390 mm, hole pattern 160 x 100 mm, M20
ROCKINGER
Load capacity: 4000 / 1000 kg. D-value: 98,1 kN. Rail width: 390 mm. Hole pattern: 160 x 100 mm. Pin Ø: 25 mm. Guide width: 32 mm. Colour: black. Des... More
Load capacity: 4000 / 1000 kg. D-value: 98,1 kN. Rail width: 390 mm. H...
€599,63 €495,56 €462,00 €381,82
You save 23%
Scharmüller Support plates ball 80, 74 kN, 912 x 260 mm, 2 heart
Scharmüller
Overhang (mm): 158 / 258 | D-value (kN): 74 | Lock: ball 80 | Version: Standard | Colour: Kubota grey | Load capacity (kg): 3000 | Thickness (mm): 50 ... More
Overhang (mm): 158 / 258 | D-value (kN): 74 | Lock: ball 80 | Version:...
€2.222,78 €1.837,01 €2.094,96 €1.731,37
You save 6%
Scharmüller Drawbar frame standard ball 80, 104 kN, 4000 kg, rail 390 mm
Scharmüller
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Rail width (mm): 390 | Category: Bearing supports | Version: Standard | D-value (k... More
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Ra...
€2.326,08 €1.922,38 €2.189,99 €1.809,91
You save 6%
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
You save 21%
Scharmüller Drawbar retrofit kit 80 x 50 mm, 89,3 kN, 2200 kg, cat. 2, AGCO gray
Scharmüller
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capacity (kg): 2200 | Version: Retrofit kits | D-value (kN): 89,3 | Height (mm): 50 |... More
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capac...
€620,46 €512,78 €570,82 €471,75
You save 8%
Sauermann Wear plate trailer coupling HS 1710-1KUD/3KUD
€179,80 €148,60 €165,42 €136,71
You save 8%
Sauermann Cover trailer coupling Ø 8,2 mm HS 1700-1KUD / 3KUD 330 mm
Sauermann
Description: Ø 8.2 mm More
Description: Ø 8.2 mm
€94,98 €78,50 €87,38 €72,22
You save 8%
ROCKINGER Forced steering left K50
ROCKINGER
Lock: K50. Assembly notes: Anticlockwise. To fit: For hitch support with lateral preparation for forced steering. More
Lock: K50. Assembly notes: Anticlockwise. To fit: For hitch support wi...
€419,19 €346,44 €322,98 €266,93
You save 23%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
You save 21%
Scharmüller Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
Scharmüller
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal width: 101 mm. Colour: Black. Description: Approved for steering forces up to 20 k... More
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal wi...
€1.031,70 €852,64 €977,51 €807,86
You save 5%
LED dipped beam 113 x 122 x 92 mm, 12 / 24 V, 20 W John Deere
Protection class: IP69K | Operating temperature (°C): -40 / +50°C | Connection: HB3/9005 connector | Dimensions W x H x D (mm): 113 x 122 x 92 | Lig... More
Protection class: IP69K | Operating temperature (°C): -40 / +50°C | ...
€68,94 €56,98 €63,42 €52,42
You save 8%
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.305,67 €1.905,51 €2.171,22 €1.794,40
You save 6%
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
Scharmüller Drawbar frame rail 390 mm, guide 32 mm, 117 kN, 4000 kg
Scharmüller
Load capacity (kg): 4000 | Category: Lagerböcke | Guide width (mm): 32 | Version: vorbereitet Zugpendel | Colour: Claas Grau | Rail width (mm): 390 |... More
Load capacity (kg): 4000 | Category: Lagerböcke | Guide width (mm): 3...
€1.887,39 €1.559,83 €1.786,40 €1.476,36
You save 5%
LED headlight dipped beam 12 / 24 V, 84 x 89 x 92 mm, HB3/9005
Current (A): [email protected] [email protected] | Voltage range (V): 10 - 30 | Light function: Dipped beam | EMC: CISPR 25 class 3 | Housing material: Aluminium | Bu... More
Current (A): [email protected] [email protected] | Voltage range (V): 10 - 30 | Light ...
€90,15 €74,50 €82,94 €68,54
You save 8%
Scharmüller Inner part coupling pin 31 mm, rail width 390 mm, pin Ø 25 mm
Scharmüller
Colour: Black | Load capacity (kg): 2500 | D-value (kN): 97,1 | Guide width (mm): 32 | Connecting pin (mm): 31 | Rail width (mm): 390 | Detent pin Ø ... More
Colour: Black | Load capacity (kg): 2500 | D-value (kN): 97,1 | Guide ...
€1.171,76 €968,40 €1.128,02 €932,25
You save 4%
Scharmüller Drawbar frame standard Piton fix, 97,1 kN, 3000 kg, rail 390 mm
Scharmüller
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 | Colour: AGCO grey | D-value (kN): 97,1 | Category: Bearing supports | Version: ... More
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 |...
€1.562,20 €1.291,07 €1.487,22 €1.229,11
You save 5%
Scharmüller Forced steering left 2 ton, 250 mm, K50, AGCO gray
Scharmüller
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | ... More
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes...
€648,30 €535,79 €596,44 €492,92
You save 8%
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
€251,26 €207,65 €231,16 €191,04
You save 8%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€79,91 €66,04 €73,52 €60,76
You save 8%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €60,15 €49,71
You save 8%
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth clockwise, 238 mm
€580,85 €480,04 €347,89 €287,51
You save 40%
ROCKINGER Support plate ball 80, forced steering 4500 kg, 930 x 180 mm
ROCKINGER
Lock: ball 80. Load capacity: 4500 kg. D-value: 100 kN. Length: 930 mm. Width: 180 mm. Thickness: 50 mm. Number of heart pins: 1. Heart pin Ø: 32,5 m... More
Lock: ball 80. Load capacity: 4500 kg. D-value: 100 kN. Length: 930 mm...
€2.819,46 €2.330,13 €2.222,35 €1.836,65
You save 21%
ROCKINGER Support plate System 80 ball 80, 930 x 180 mm, 4.500 kg, 100 kN
ROCKINGER
Lock: ball 80. Load capacity: 4500 kg. D-value: 100 kN. Length: 930 mm. Width: 180 mm. Thickness: 50 mm. Number of heart pins: 1. Heart pin Ø: 32,5 m... More
Lock: ball 80. Load capacity: 4500 kg. D-value: 100 kN. Length: 930 mm...
€1.967,19 €1.625,78 €1.565,68 €1.293,95
You save 20%
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm. More
Dimensions: Ø 80 mm mm.
€137,65 €113,76 €126,64 €104,66
You save 8%
Walterscheid Drawbar support M20, black, John Deere
Walterscheid
Colour: black | Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox. More
Colour: black | Description: Drawbar support that can be mounted secur...
€638,58 €527,75 €504,86 €417,24
You save 21%
Scharmüller Forced steering left 2 ton, K50, connection position 250 John Deere
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 | Steering power (t): 2 | Colou... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€648,30 €535,79 €596,44 €492,92
You save 8%
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
Rail width (mm): 330 | D-value (kN): 74 | Category: Bearing supports | Load capacity (kg): 3000 | Colour: Kubota grey | Version: Prepared for drawbar ... More
Rail width (mm): 330 | D-value (kN): 74 | Category: Bearing supports |...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
Scharmüller Forced steering double-sided 2 ton, 250 mm, K50, AGCO gray, 25 kg
Scharmüller
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes...
€1.023,50 €845,87 €941,62 €778,20
You save 8%
Scharmüller Forced steering right 2 ton, 250 mm, K50, AGCO gray, 15 kg
Scharmüller
Connection position: 250 mm | Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes: Right | Description: Approved for steering force... More
Connection position: 250 mm | Steering power (t): 2 | Colour: AGCO gre...
€648,30 €535,79 €596,44 €492,92
You save 8%
External plate thickness 3 mm, inner 138 mm, outer 215 mm
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€69,85 €57,73 €64,26 €53,11
You save 8%
Expansion valve 3/8 inch o-ring John Deere 6010 - 9620RX
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: - More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€67,42 €55,72 €62,03 €51,26
You save 8%
LED work light oval spotlight 65 W, 3500 lm John Deere 5100R - 8320R
Operating temperature (°C): -40 / +50 | Mounting type: Vertical, M4 | Power consumption (W): 65 | No. of LEDs: 4 | Light function: Spotlight | Theore... More
Operating temperature (°C): -40 / +50 | Mounting type: Vertical, M4 |...
€82,01 €67,78 €75,45 €62,35
You save 8%
Denso Starter motor with reduction 12 V, 4,8 kW, 10 teeth, 245 mm, clamp 30 M12
€809,35 €668,88 €744,60 €615,37
You save 8%
HELLA LED work lights flood beam 28 W, 1700 lm, 177 x 105 mm
HELLA
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs included: Yes. Light function: Close-range illumination. Dimensions W x H x D: 1... More
Nominal voltage: 12 / 24 V. Voltage range: 9 - 33 V. Bulb: LED. Bulbs ...
€306,82 €253,57 €295,50 €244,22
You save 4%
LED work light oval spotlight 65 W, 6000 lm John Deere 5085E - 8320R
Current (A): [email protected] [email protected] | Dimensions W x H x D (mm): 170 x 82 x 79 | Nominal voltage (V): 12 / 24 | No. of LEDs: 4 | Form: Oval | Mounting siz... More
Current (A): [email protected] [email protected] | Dimensions W x H x D (mm): 170 x 82 ...
€90,38 €74,69 €83,15 €68,72
You save 8%
Stabilus Gas strut 200 N, 475 mm, stroke 195 mm John Deere 7200R - 8370R
Stabilus
Newtons: 200 | d1 (mm): 8 | A (mm): 475 | Form: 6 | B (mm): 234,9 | Stroke (mm): 195 | d2 (mm): 18 More
Newtons: 200 | d1 (mm): 8 | A (mm): 475 | Form: 6 | B (mm): 234,9 | St...
€173,49 €143,38 €159,61 €131,91
You save 8%
FEBI Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC
FEBI
Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC More
Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC
€82,72 €68,36 €23,09 €19,08
You save 72%
Connecting rod bearing John Deere
€47,27 €39,07 €43,49 €35,94
You save 8%
Scharmüller Forced steering right 2 ton, K50, connection position 250 John Deere
Scharmüller
Assembly notes: Right | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 | Steering power (t): 2 | Colour: Kubot... More
Assembly notes: Right | Description: Approved for steering forces up t...
€648,30 €535,79 €596,44 €492,92
You save 8%
Scharmüller Support plates ball 80, 965 x 270 mm, thickness 50 mm, 97,1 kN
Scharmüller
Thickness (mm): 50 | Load capacity (t): 3 | Number of heart pins: 1 | Lock: ball 80 | Colour: AGCO grey | Category: Support plates | Version: Standard... More
Thickness (mm): 50 | Load capacity (t): 3 | Number of heart pins: 1 | ...
€2.025,12 €1.673,65 €1.913,11 €1.581,08
You save 6%
Stabilus Gas strut 125 N, 425 mm, stroke 150 mm John Deere 7200R - 9620RX
Stabilus
Form: diverse | d1 (mm): 6 | Stroke (mm): 150 | A (mm): 425 | B (mm): 229,2 | d2 (mm): 15 | Newtons: 125 More
Form: diverse | d1 (mm): 6 | Stroke (mm): 150 | A (mm): 425 | B (mm): ...
€152,02 €125,64 €139,86 €115,59
You save 8%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€645,02 €533,07 €386,32 €319,28
You save 40%
Showing 1 - 48 of 117

John Deere 7280R parts for hitching, lighting and air brakes

The 7280R is the kind of tractor that ends up in front of heavy haulage trailers, wide drills and trailers with a steered axle. That puts the hitch under load every working day. On this page you will find more than 110 new replacement parts for the John Deere 7280R, from GRANIT, Scharmüller, ROCKINGER, Sauermann and Walterscheid, selected for this particular model.

What you can order for the 7280R

  • Forced steering with inserts for the Pick-Up Hitch, for trailers with a self tracking axle.
  • Drawbars and drawbar frames, including automatic hitches for the rail system.
  • Support plates and flange hitches for a ball hitch or a fixed flange mounting.
  • Adapter plates and drawbar supports to set the hitch height and carry the drawbar.
  • LED work lights, both flood beam and oval spotlight versions.
  • Air brake connector heads for the trailer lines.
  • Telescopic mirror brackets for left and right, with electric adjustment.
  • Smaller items such as covers, sleeves, seal kits and pressure sensors.

The forced steering components deserve a little extra care. The insert in the Pick-Up Hitch and the rod to the trailer are loaded on every turn. Grease the ball and the insert regularly and feel for play whenever you unhitch. A worn insert means the trailer no longer follows the tractor cleanly, which you notice straight away on tight corners in the yard.

A word on air brake couplings

The red connector head is the supply line, the yellow one is the control or brake line. Swap them and the trailer will not brake as it should. When you replace a head, look at the rubber seal inside it as well. A cracked seal leaks air, the compressor cuts in more often and the reservoir bleeds down overnight. Keep the dust caps shut whenever nothing is connected so grit and water stay out.

Getting the fit right

Check the data plate on your 7280R and compare the reference number on the old part with the details shown on the product. With drawbar frames and support plates, also look at the mounting on the tractor before you order, since that decides which hitch system will bolt on.

The 7280R is part of the 7R series. The other models in that range each have their own page with their own selection, useful if there is more than one John Deere in the yard:

For any other model from the brand, go to John Deere parts and choose your tractor there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart