Menu
EUR

Massey Ferguson 8240 tractor parts & technical data

Time to replace a trailer coupling or a light on the Massey Ferguson 8240? More than 350 parts for this 8200 series tractor are listed here, electrics too.

343 parts found for Massey Ferguson 8240
Show:
Sealing ring 48 x 75 x 14/17 mm Massey Ferguson
5%
Sealing ring 48 x 75 x 14/17 mm Massey Ferguson
€76,67 €63,36 €72,80 €60,17
 
Universal joint 30,18 x 106,3 mm, maintenance-free
5%
Universal joint 30,18 x 106,3 mm, maintenance-free
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: Maintenanc...
€224,08 €185,19 €212,85 €175,91
 
Scharmüller Support plates ball 80, 3000 kg, 868 x 290 mm, thickness 50 mm
Scharmüller
Support plates ball 80, 3000 kg, 868 x 290 mm, thickness 50 mm
suitable for: Massey Ferguson. Series: 8200. Category: Support plates. Version: ...
€1.604,00 €1.325,62
 
Inlet valve engine Sisu 320-620
5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.414,07 €1.168,65 €1.082,75 €894,83
 
GRANIT Rocker switch hydraulics linkage rear, lift / lower
10%
GRANIT
Rocker switch hydraulics linkage rear, lift / lower
Version: Rear power lift: lift/lower, if 3782020M2 or 4270970M2 was originally i...
€120,02 €99,19 €108,55 €89,71
 
Bowden cable steering valve 1460 mm Massey Ferguson 6110 - 8280
5%
Bowden cable steering valve 1460 mm Massey Ferguson 6110 - 8280
Length (mm): 1460
€246,65 €203,84 €234,30 €193,64
 
Bosch/Rexroth Hydraulic pump 71 cm³ left Massey Ferguson 8170 - 8280
10%
Bosch/Rexroth
Hydraulic pump 71 cm³ left Massey Ferguson 8170 - 8280
Direction of rotation: Anticlockwise | Output volume (cc/rev): 71
€5.367,26 €4.435,75 €4.856,00 €4.013,22
 
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lo...
€1.855,80 €1.533,72
 
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
5%
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Pow...
€119,54 €98,79 €113,55 €93,84
 
MAHLE Starter motor with reduction 12 V, 3,2 kW, 10 teeth, Ø 89 mm, angle r 50
38%
MAHLE
Starter motor with reduction 12 V, 3,2 kW, 10 teeth, Ø 89 mm, angle r 50
€502,92 €415,64 €314,30 €259,75
 
GRANIT Cardan shaft bearing 38 x 80 x 49 mm Massey Ferguson 3635-8280
5%
GRANIT
Cardan shaft bearing 38 x 80 x 49 mm Massey Ferguson 3635-8280
€137,31 €113,48 €130,40 €107,77
 
GRANIT Ball joint, complete right and left 420 mm, taper 23,5 - 26,5 mm
5%
GRANIT
Ball joint, complete right and left 420 mm, taper 23,5 - 26,5 mm
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5...
€136,27 €112,62 €129,45 €106,98
 
LUK Torsion damper 26 teeth, 39 x 42,5 mm Massey Ferguson 8210-8280
5%
LUK
Torsion damper 26 teeth, 39 x 42,5 mm Massey Ferguson 8210-8280
Number of teeth: 26. Tooth profile: 39x42.5.
€637,97 €527,25 €606,00 €500,83
 
Radiator cap Ø 58 mm, height 26 mm, 0,5 bar
Radiator cap Ø 58 mm, height 26 mm, 0,5 bar
Neck Ø: 58 mm. Height: 26 mm. Opening pressure: 0,5 bar.
€12,65 €10,45
 
Valve cover gasket engine Sisu 320D
Valve cover gasket engine Sisu 320D
€23,40 €19,34
 
Force sensor pin 60 kN Massey Ferguson
5%
Force sensor pin 60 kN Massey Ferguson
€395,80 €327,11 €376,00 €310,74
 
GRANIT Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
GRANIT
Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. For...
€38,15 €31,53
 
Pivot
5%
Pivot
€560,71 €463,40 €532,65 €440,21
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
GRANIT Push button switch hazard warning light switch 12 / 24 V, button red
GRANIT
Push button switch hazard warning light switch 12 / 24 V, button red
Version: 12/24 V Red button, with light and lock, Ø 30 mm, 7 blade terminals 6.3...
€35,45 €29,30
 
Replacement key blank
Replacement key blank
Version: To fit: Ford, David Brown, Massey Ferguson. To fit: Types:, Case IH 385...
€3,16 €2,61
 
GRANIT Rocker switch work light with illumination indicator
5%
GRANIT
Rocker switch work light with illumination indicator
Version: With illumination indicator.
€34,21 €28,27 €32,45 €26,82
 
Showing 25 - 48 of 343

Massey Ferguson 8240 parts for the PTO clutch, cab and hitch

A slipping PTO is one of the classic jobs on a Massey Ferguson 8240, which is why inner and outer plates for the PTO clutch sit on this page next to more than 350 other parts that fit this tractor. They come from GRANIT and from makers such as Scharmüller, Cobo, HELLA and GRAMMER, and cover the engine bay, the cab, lighting and the rear hitch.

What you can fit to an 8240

  • Driveline and engine: PTO clutch plates, starter motors, thermostats and O-rings, for example for the feed pump.
  • Sealing: seals and sealing rings, such as a seal for the tank sensor and a sealing ring for the rear window lock.
  • Cab: gas struts for the rear window, mirrors, tractor seats, contact switches and push buttons.
  • Lighting: work lamps from HELLA and others, including a square built-in spotlight.
  • Hitching: drawbars for the hitch rail and bushes for the split pin lock.

Rebuilding the PTO clutch properly

Once the clutch housing is open, replace the inner and outer plates as a full pack. Fitting a fresh friction plate against a worn, heat-blued steel plate means it runs hot again and the PTO starts slipping under heavy load. Lay every steel plate on a flat bench and check that it sits true. While you are in there, renew the O-rings and sealing rings in that area too, so a small weep does not send you back into the housing a month later.

If the engine does not crank when you turn the key, do not condemn the starter straight away. A worn contact switch gives exactly the same symptoms. With a multimeter, check whether voltage reaches the starter signal wire with the key in the start position. If nothing arrives, the fault lies in the switch or the wiring and the starter can stay where it is. The two gas struts on the rear window age at the same rate, so change them as a pair. A single new strut pushes the glass open unevenly and strains the hinges. When fitting a new HELLA work lamp, look at the plug as well and protect the pins with a little contact grease.

Matching the part to your tractor

The type plate on the tractor tells you exactly which 8240 you are working on. For a thermostat, starter or switch, your best clue is the number stamped on or stuck to the old part. Compare it with the product details on this page. For clutch plates, measure the thickness and the inner and outer size of the old plate with a caliper before ordering.

Other tractors in the 8200 series

If the 8240 shares the yard with another model from the same series, order through that tractor's own page so you only see the parts recorded for it:

Every other model page for the brand is gathered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart