Menu
EUR

Case IH 895 XL tractor parts & technical data

The Case IH 895 XL, also known as the IHC 895 XL, has its own page here with more than 250 parts, such as steering and front axle, lighting and electrics.

264 parts found for Case IH 895 XL
Show:
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€124,74 €103,09 €114,76 €94,84
You save 8%
Roof lining XL series Case IH Series 95-1455 XL
€1.130,06 €933,93 €1.039,66 €859,22
You save 8%
LED work lights spotlight 48 W, 6300 lm, 160 x 98,5 x 66,6 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€72,37 €59,81 €66,58 €55,03
You save 8%
Stud exhaust 3/8" x 38 mm Case IH
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm. More
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm.
€4,58 €3,78
Sealing ring
€7,10 €5,87
Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blade terminal. More
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally cl...
€11,46 €9,47
Gas strut rear window 180 N, 550 mm, stroke 231 mm Case IH
Newtons: 180. A: 550 mm. B: 278 mm. C: 10 mm. D: 10 mm. Stroke: 231 mm. d1: 8 mm. d2: 18 mm. To fit: Rear screen. Form: 6. Menke no.: 54790. More
Newtons: 180. A: 550 mm. B: 278 mm. C: 10 mm. D: 10 mm. Stroke: 231 mm...
€33,89 €28,01 €31,18 €25,77
You save 8%
HELLA Rocker switch hazard lights locks in place, 7 connections 6,3 mm
HELLA
Version: Insert with symbol must be ordered separately. Without location light, with function light, 7 blade terminals 6.3 mm, 2 switch positions: 0: ... More
Version: Insert with symbol must be ordered separately. Without locati...
€32,91 €27,20
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
Start safety switch differential lock M18 x 1,5 Case IH
Version: Differential lock (contact function) Thread: M18 x 1.5 2 blade terminals More
Version: Differential lock (contact function) Thread: M18 x 1.5 2 blad...
€40,09 €33,13 €36,88 €30,48
You save 8%
Sleeve drive shaft 24 teeth Case IH 85-1056, 3210-3230
€200,25 €165,50 €184,23 €152,26
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Weight (g): 195 More
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipm...
€57,45 €47,48 €52,85 €43,68
You save 8%
Danfoss Orbitrol OSPC 100 OR Case IH, SAME, Deutz-Fahr
Danfoss
Type: OSPC 100 OR / 150N1222. More
Type: OSPC 100 OR / 150N1222.
€1.002,07 €828,16 €921,90 €761,90
You save 8%
Ball holder for gas strut rear window Case IH Series 32-4240
€62,12 €51,34 €57,15 €47,23
You save 8%
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: Ø 168 x 116 mm. Mount... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€81,44 €67,31 €78,43 €64,82
You save 4%
HELLA Interior lights K (10W), clear, 12 V, built-in
HELLA
Bulb: K (10W). Colour: Transparent. Installation location: Interior. Nominal voltage: 12 V. Switches: On switch. Type: Halogen. Light function: Interi... More
Bulb: K (10W). Colour: Transparent. Installation location: Interior. N...
€14,68 €12,13
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
SANDEN
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. of grooves: 2 | Reference no.: SD7H15-4478, 86993462, 1999755C2, 19997... More
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP -...
€621,28 €513,45 €571,58 €472,38
You save 8%
LUK Clutch kit with thrust bearing and pilot bearing Case IH 248 - 4240
LUK
Contents: Pressure plate 458131003813, clutch plate 458331015411, release bearing 458500104650, pilot bearing 458410002641 More
Contents: Pressure plate 458131003813, clutch plate 458331015411, rele...
€915,73 €756,80 €842,47 €696,26
You save 8%
LUK Clutch plate 310TDCN 1 1/8 inch, 10 splines, sintered Case IH
LUK
Material specifications: Sintered clutch lining | Dimensions (inches): 1 1/8"" 10 grooves More
Material specifications: Sintered clutch lining | Dimensions (inches):...
€336,34 €277,97 €309,43 €255,73
You save 8%
Elring Cylinder head gasket 1,59 mm Case IH engine D-206, D-239, D-246, D-268
€118,89 €98,26 €109,38 €90,40
You save 8%
Koppelingshulpcilinder Case IH 3210 - 4240, CX 50 - CX 100
€127,06 €105,01 €116,90 €96,61
You save 8%
FEBI Alternator 14 V / 70 A, form A, flange 80,5 mm
FEBI
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguson More
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguso...
€213,83 €176,72 €161,65 €133,60
You save 24%
HELLA Steering column switch straight, 115 mm, indicator, horn, indicator
HELLA
Version: Functions: indicators, horn and headlight flasher, lever 115 mm long, steering column switch. Form: Straight. Length: 115 mm. Switching funct... More
Version: Functions: indicators, horn and headlight flasher, lever 115 ...
€120,58 €99,65 €116,12 €95,97
You save 4%
Single clutch 310 DBVO, 1 5/8 inch, 10 splines Case IH
Additional information: Made in Germany | Dimensions (mm): 1 5/8"", 10 grooves | Flywheel dimension (mm): 36 (tief) More
Additional information: Made in Germany | Dimensions (mm): 1 5/8"", 10...
€305,68 €252,63 €281,23 €232,42
You save 8%
Internal plate PTO clutch 2,1 mm, inner 93,3 mm, outer 125 mm
Version: thickness = 2,1 mm inner = 93,3 mm outer 125 mm More
Version: thickness = 2,1 mm inner = 93,3 mm outer 125 mm
€34,20 €28,26 €31,46 €26,00
You save 8%
Clutch plate 310 CCE sintered, 23,4 x 28,9 mm, 10 splines Case IH
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€262,94 €217,31 €241,90 €199,92
You save 8%
Thrust bearing 60 x 102 x 20,5 mm Case IH
Dimensions (mm): 60 x 102 x 20.5 More
Dimensions (mm): 60 x 102 x 20.5
€45,69 €37,76 €42,03 €34,74
You save 8%
Alternator 14 V, 70 A, flange 82 mm
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Installation angle (°): l 60 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm... More
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Instal...
€154,77 €127,91 €142,39 €117,68
You save 8%
Elring Gasket set lower Case IH engine D-206, D-239, D-246, D-268
Elring
Additional information: Without cylinder liner gasket set More
Additional information: Without cylinder liner gasket set
€319,07 €263,69 €293,54 €242,60
You save 8%
Starter ring gear Ø 410/372 mm, 128 teeth Case IH
Version: Ø 410/372 mm, 128 teeth. More
Version: Ø 410/372 mm, 128 teeth.
€94,33 €77,96 €86,78 €71,72
You save 8%
Crankshaft seal set for Case IH
Menke no.: 63685. More
Menke no.: 63685.
€59,48 €49,16 €54,72 €45,22
You save 8%
Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,85 €12,27
AKS-Dasis Air conditioning compressor 12 V, pulley-Ø 152 mm, 2 grooves Case IH
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | No. of grooves: 2 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: M Inlet: 20.5 ... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | No. of grooves: 2 | No...
€532,24 €439,87 €489,66 €404,68
You save 8%
MAHLE Alternator 14 V, 100 A, flange 82 mm
MAHLE
Nominal voltage (V): 14 | Additional information: Compact alternator, dust-tight | Mounting L / d / R (mm): 82,0 / 8,2 / 86,0 | Charging current (A): ... More
Nominal voltage (V): 14 | Additional information: Compact alternator, ...
€410,36 €339,14 €245,78 €203,13
You save 40%
HELLA Starter motor 12 V, 3 kW, 10 teeth, Ø 89 mm, clockwise
€600,18 €496,02 €462,42 €382,17
You save 23%
PTO shaft end piece 244,5 mm Case IH
Version: Length 244,5 mm. More
Version: Length 244,5 mm.
€231,13 €191,02 €212,64 €175,74
You save 8%
Handle half for deurruitverstelling Case IH Series 32-4240
€34,62 €28,61 €31,85 €26,32
You save 8%
Reflector round red Ø 90 mm, M5, bolted
Material: Plastic | Additional information: External thread (M5) | Hole Ø (mm): M5 | Mounting type: Bolted | Form: Round | Total Ø (mm): 90 | Menke ... More
Material: Plastic | Additional information: External thread (M5) | Hol...
€7,98 €6,59
Internal plate Hi-Lo PTO shaft 2 mm, 98 - 125 mm Case IH
Version: thickness = 2 mm inner = 98 mm outer = 125 mm More
Version: thickness = 2 mm inner = 98 mm outer = 125 mm
€33,72 €27,87 €31,02 €25,64
You save 8%
LUK Clutch kit without release bearing Case IH 248 - 4240
LUK
Supplementary set: Without release bearing | Contents: Pressure plate 458131003811, clutch plate 458331015411 More
Supplementary set: Without release bearing | Contents: Pressure plate ...
€752,77 €622,12 €692,55 €572,35
You save 8%
LUK Thrust bearing 2,375 x 4 x 0,8 inch Case IH, McCormick
LUK
Dimensions (inches): 2.375"" x 4"" x 0.8"" More
Dimensions (inches): 2.375"" x 4"" x 0.8""
€104,21 €86,12 €95,87 €79,23
You save 8%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 89 mm, l 135
€610,79 €504,79 €548,74 €453,50
You save 10%
Axial joint 180 mm, M20 x 1,5 / M18 x 1,5, 32 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€43,18 €35,69 €39,73 €32,83
You save 8%
Axial joint 180 mm, M20 x 1,5, M18 x 1,5, 32°
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€76,07 €62,87 €69,98 €57,84
You save 8%
Track rod 500 mm, 7/8" x 16, taper 15,4 - 17,9 mm, 9/16" x 18
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. F: 20,75 mm. More
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. ...
€126,19 €104,29 €116,09 €95,95
You save 8%
Showing 1 - 48 of 264

Case IH 895 XL parts for the engine, steering and cab

Plenty of owners still know it as the IHC 895 XL, and both names refer to the same tractor. This page covers that machine, now known as the Case IH 895 XL, with more than 250 new replacement parts that fit it. Alongside GRANIT you will find makers such as HELLA, ZF, Carraro and KS.

Engine overhaul and sealing

An engine rebuild on the 895 XL calls for pistons, piston ring sets and brass bushes for the injector nozzle holders, together with O-rings, sealing rings and gaskets such as the feed pump O-ring and the gasket under the thermostat housing. Radiator hoses that have gone hard or cracked are best replaced while the coolant is drained anyway.

When fitting new piston rings, stagger the ring gaps around the piston and use a ring expander rather than spreading them with your thumbs. A ring that has been opened too far no longer sits snugly against the cylinder wall, and that shows up later as oil consumption and blow-by.

Steering, clutch plates and cab

Steering play on this tractor often comes down to worn axial joints or track rod ball joints, and you can get both here. For the driveline there are internal and external plates, including parts from ZF and Carraro. Always renew plates as a complete pack, and soak new friction plates in the same oil the unit will run on before you assemble it.

Around the cab there are gas struts for the door, HELLA work lamps, rocker switches and a flasher unit. If the indicators suddenly blink at double speed, look for a blown bulb before you blame the flasher unit.

New radiator hoses deserve new clamps. Old clamps have usually bitten deep into the rubber and no longer grip a fresh hose evenly. Retighten them once the engine has warmed up for the first time, as a new hose settles slightly.

Matching the right part

Confirm the model on the type plate first, then compare the number stamped or cast into the old part with the reference number given for the product. With pistons and gaskets that extra check pays off, because parts that look alike can differ in small details.

The 895 XL belongs to the Case IH 95 series. The Case IH 695 XL and the Case IH 695 each have their own page, which helps if more than one tractor from that line works on the farm. Every other model of the brand is grouped under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart