Menu
EUR

Case IH JX 80U tractor parts & technical data

The Case IH JX 80U from the JXU series is covered with more than 200 parts. Browse trailer couplings, lighting and brake and transmission parts by group.

223 parts found for Case IH JX 80U
Show:
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.616,17 €1.335,68 €1.271,24 €1.050,61
You save 21%
FEBI Engine oil filter Ø 107,67 mm, height 129,92 mm, thread 3/4"-16 UNF
€59,44 €49,12 €10,98 €9,07
You save 82%
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€32,69 €27,02 €30,07 €24,86
You save 8%
Exhaust pipe on the cab pillar New Holland TL, Case IH JXU
Version: On the cab pillar. More
Version: On the cab pillar.
€237,82 €196,55 €218,79 €180,82
You save 8%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €168,86 €139,55
You save 8%
Cobo Work light rectangular H3 12/24 V, 158 x 96 mm, right
Cobo
Nominal voltage (V): 12 / 24 | Bulb: H3 | Height (mm): 96 | Installation location: Right | Color: Black | Fixing: Jointed bracket | Form: Rectangular ... More
Nominal voltage (V): 12 / 24 | Bulb: H3 | Height (mm): 96 | Installati...
€83,93 €69,36 €77,22 €63,81
You save 8%
Eaton Driven gear wheel transmission
Eaton
Reference no.: 5169606 More
Reference no.: 5169606
€136,74 €113,01 €125,80 €103,97
You save 8%
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€30,45 €25,17
Eaton Drive pinion transmission 2,65 kg
Eaton
Reference no.: 5172047 More
Reference no.: 5172047
€418,94 €346,23 €385,42 €318,53
You save 8%
Cobo Work light rectangular H3, steel bracket Case IH, New Holland
Cobo
Material: Polyamide | Bulb: H3 | Color: Black | Fixing: Steel bracket | Form: Rectangular More
Material: Polyamide | Bulb: H3 | Color: Black | Fixing: Steel bracket ...
€77,64 €64,17 €71,43 €59,03
You save 8%
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.157,46 €956,58 €1.064,86 €880,05
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Weight (g): 195 More
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipm...
€57,45 €47,48 €52,85 €43,68
You save 8%
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€33,70 €27,85
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.022,73 €845,23 €940,91 €777,61
You save 8%
Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€25,23 €20,85
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.422,99 €1.176,02 €1.297,49 €1.072,31
You save 9%
HELLA Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
HELLA
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14 | Additional information: With pulley | Pulley Ø (mm): 93 | Nominal values (V ... More
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14...
€305,58 €252,55 €235,44 €194,58
You save 23%
Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional information: Unheated | Installation location: Right/left | To fit: Case... More
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Add...
€503,82 €416,38 €463,51 €383,07
You save 8%
AKS-Dasis Condenser without dryer Case IH, Fiat, Ford, New Holland
AKS-Dasis
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer More
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer
€580,51 €479,76 €534,07 €441,38
You save 8%
Expansion valve 3/8 - 5/8 inch o-ring
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€48,74 €40,28 €44,84 €37,06
You save 8%
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
You save 46%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.363,65 €1.126,98 €1.100,67 €909,64
You save 19%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
MAHLE
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: V/TO | Suitable oil: PAG 46 | Pulley Ø (mm): 132 More
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Co...
€513,19 €424,12 €461,06 €381,04
You save 10%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€196,97 €162,79 €181,21 €149,76
You save 8%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€58,64 €48,46 €53,95 €44,59
You save 8%
SANDEN Air conditioning compressor 12 V, pulley Ø 119 mm, 2 grooves, 200 ccm oil
SANDEN
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable oil: SP 10 | Oil quantity (ccm): 200 | Refrigerant: R 134a More
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fi...
€732,23 €605,15 €673,65 €556,74
You save 8%
Pilot bearing 17 x 47 x 14 mm
Dimensions (mm): 17 x 47 x 14 More
Dimensions (mm): 17 x 47 x 14
€6,59 €5,44
Steering cylinder Case IH, Fiat, Ford, New Holland
Reference no.: 5189893 More
Reference no.: 5189893
€400,19 €330,74 €368,17 €304,28
You save 8%
Eaton Drive pinion transmission 1,37 kg
Eaton
Reference no.: 5179673 More
Reference no.: 5179673
€228,28 €188,66 €210,02 €173,57
You save 8%
Eaton Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125013 More
Reference no.: 5125013
€326,26 €269,64 €300,16 €248,07
You save 8%
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€639,84 €528,79 €383,22 €316,71
You save 40%
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 80,4 kN. Colour: Black. More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€716,17 €591,88 €658,88 €544,53
You save 8%
Bosch/Rexroth Hydraulic pump 22,5 cm³/rpm. anticlockwise Case IH, Fiat, New Holland
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 22,5 More
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction o...
€536,54 €443,42 €493,62 €407,95
You save 8%
LUK Torsion damper Ø 262 mm, 35x40, 14 teeth Case IH
LUK
Diameter (mm): 262 | Tooth profile: 35x40 | Number of teeth: 14 More
Diameter (mm): 262 | Tooth profile: 35x40 | Number of teeth: 14
€498,50 €411,98 €458,62 €379,02
You save 8%
Alternator 12 V / 45 A, pulley Ø 90 mm, W-connection
Nominal voltage (V): 12 | Charging current (A): 45 | Pulley spacing (mm): 58,0 | Additional information: With W connection | Belt tension hole Ø / R ... More
Nominal voltage (V): 12 | Charging current (A): 45 | Pulley spacing (m...
€203,36 €168,07 €187,09 €154,62
You save 8%
Eaton Link wheel Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125007 More
Reference no.: 5125007
€300,25 €248,14 €276,23 €228,29
You save 8%
Eaton Main shaft transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5161817 More
Reference no.: 5161817
€433,08 €357,92 €398,43 €329,28
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
€657,02 €542,99 €506,23 €418,37
You save 23%
Track rod 2WD 1090 - 1180 mm, taper 18 - 20 mm
A: 1090 - 1180 mm. B: M24 x 1,5 mm. C: 18 - 20 mm. G: . D: M24 x 1,5 mm. E: 32 mm. F: 24,4 mm. More
A: 1090 - 1180 mm. B: M24 x 1,5 mm. C: 18 - 20 mm. G: . D: M24 x 1,5 m...
€254,26 €210,13 €233,92 €193,32
You save 8%
LUK Clutch kit Case IH, Fiat, Ford, New Holland
LUK
Contents: Pressure plate 458231010511, clutch plate 458331022010 | To fit: Case IH, New Holland More
Contents: Pressure plate 458231010511, clutch plate 458331022010 | To ...
€1.215,92 €1.004,89 €1.168,65 €965,83
You save 4%
LUK Double clutch 310/310TGU6 40 x 45 mm, 16 splines sintered chain pitch 33 mm
LUK
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specific...
€1.193,19 €986,11 €1.147,73 €948,54
You save 4%
Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 40 x 45 16 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€764,21 €631,58 €753,07 €622,37
You save 1%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø (mm): 132 | Reference no.: QP7H15-7849 | Suitable oil: PAG 46 | Fixi... More
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 ...
€485,74 €401,44 €446,88 €369,32
You save 8%
Showing 1 - 48 of 223

Case IH JX 80U parts that keep the clutch, cooling and cab working

A worn clutch, a weeping head gasket or an air conditioning system that has stopped cooling are the jobs that tend to bring a Case IH JX 80U into the workshop. This page gathers more than 200 replacement parts that fit this tractor, from suppliers such as GRANIT, LUK, Eaton, MAHLE and ROCKINGER.

For the double clutch there are pressure plate assemblies, alongside thrust bearings for the drive clutch and gear wheels for the gearbox. Once the tractor is split, fit a new release bearing with the clutch as a matter of routine. An old bearing that has started to whine will otherwise have you splitting the tractor again within a season. While the bell housing is open, check the rear crankshaft area for oil, because contamination ruins a new friction plate quickly.

Engine, air conditioning, cab and hitch

Engine work calls for cylinder head gaskets and piston sealing rings, and the thermostat housing has its own gasket. Alternators cover the charging side. If the battery keeps going flat, measure the charge at the terminals before swapping the alternator, as a poor earth or a loose belt can produce the same symptoms.

The air conditioning compressor runs on its own V-belt. A cracked or slack belt slips under load and the cab stays hot even though the system still holds gas, so start with a new belt before suspecting anything else. If the compressor itself has failed, a replacement is on this page.

Around the cab you will find gas struts for the rear window, rear lights, a fuel tank cap and seats for the operator. At the back of the tractor there are drawbars and the Piton Fix system from ROCKINGER for heavier trailers.

Matching a part to your JX 80U

The identification plate confirms the exact model, which matters in a family with so many close relatives. The removed part is usually the better guide, though. Gaskets, bearings and alternators often carry a reference number, and comparing that number with the details on the product page is the surest way to get it right first time.

The rest of the JXU line

If you also run one of these sister models, each has its own page with parts listed for that specific tractor:

Older and larger tractors from the same maker are reached through the overview of Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart