Menu
EUR

Case IH CVX 1170 tractor parts & technical data

Working with a Case IH CVX 1170? You will find more than 350 parts for this model here, covering steering and front axle, lighting and trailer couplings.

360 parts found for Case IH CVX 1170
Show:
GRANIT LED work lights spotlight 48 W, 6300 lm, 160 x 98,5 x 66,6 mm, 12 / 24 V
GRANIT
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€72,83 €60,19 €65,85 €54,42
You save 10%
PROBOSS Tractor seat air suspended fabric, 480 mm, 12 V, AS2480
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment, longitudinal adjustment, backrest tilt adjustment. Mechanical lumbar support... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€825,20 €681,98
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.122,52 €927,70 €945,45 €781,36
You save 16%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€913,57 €755,02 €769,50 €635,95
You save 16%
GRANIT LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
GRANIT
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x 76 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€69,88 €57,75 €66,35 €54,83
You save 5%
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€27,80 €22,98
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€792,55 €655,00
Scharmüller Drawbar K50 Scharmüller S32, rail 330 mm, pin Ø 25 mm, 31 kN
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 167 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.049,90 €867,69 €884,31 €730,83
You save 16%
Scharmüller Drawbar 640 mm, 90 x 50 mm, pin 31,5 mm, 78,5 kN, position 1
Scharmüller
Category: Drawbar | Pin Ø (mm): 31,5 | D-value (kN): 78,5 | Version: Standard | Load capacity (kg): 2250 | Colour: Kubota grey | Mounting position: 1... More
Category: Drawbar | Pin Ø (mm): 31,5 | D-value (kN): 78,5 | Version: ...
€377,90 €312,31
Cylinder Carraro front axle 642489 Case IH, Renault, Steyr
€821,89 €679,25 €780,75 €645,25
You save 5%
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.390,39 €1.149,08 €1.171,10 €967,85
You save 16%
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.228,70 €1.015,45
Passenger seat plastic black
To fit: New Holland. Colour: Schwarz. Upholstery type: Plastic, black. More
To fit: New Holland. Colour: Schwarz. Upholstery type: Plastic, black.
€334,45 €276,41
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€39,10 €32,31
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
GRANIT
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€78,15 €64,59 €70,70 €58,43
You save 10%
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
GRAMMER
Side horizontal suspension: Yes | Upholstery type: Fabric / new design | Armrest: Yes | Included in delivery: Seat supplied with seat contact switch a... More
Side horizontal suspension: Yes | Upholstery type: Fabric / new design...
€5.136,45 €4.245,00 €4.879,60 €4.032,73
You save 5%
HELLA Xenon bulb D1S 85 V, 35 W, base Pk32d-2
HELLA
Bulb: D1S / 35W. Power: 35 watts. Socket: Pk32d-2. Voltage: 85 V. More
Bulb: D1S / 35W. Power: 35 watts. Socket: Pk32d-2. Voltage: 85 V.
€109,30 €90,33
HELLA Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
HELLA
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing: 160 mm. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 182 x 1... More
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing...
€80,85 €66,82
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, without bracket
HELLA
Version: Power rating: 12 V / 2 + 1 +1 x 21 W / 8 x 21 W, With hazard warning function, without bracket. Protection class: 64. Nominal voltage: 12 V. ... More
Version: Power rating: 12 V / 2 + 1 +1 x 21 W / 8 x 21 W, With hazard ...
€73,86 €61,04 €56,55 €46,74
You save 23%
Showing 1 - 24 of 360

Case IH CVX 1170 parts for hitching, engine and cab

A CVX 1170 spends much of its working life pulling heavy trailers and implements, so this page starts at the back of the tractor. It holds more than 350 replacement parts for the Case IH CVX 1170 from makers such as Scharmüller, ROCKINGER, GRANIT, HELLA and Carraro.

Drawbar, Piton Fix and adapter plate

For the hitch rail there are drawbars, a Piton Fix for low hitching and adapter plates that let you mount a different coupling system on the existing rail. Pins and catch hooks wear oval over time. Check the play whenever the tractor is in the yard, because a worn pin sends a jolt through the whole driveline every time you pull away or brake with a loaded trailer.

Steering ball joints are part of the same picture. A joint with play shows up as vague steering and knocking over rough ground.

Engine, linkage and cab

Around the engine you will find water pump gaskets, sealing rings, O-rings such as the one on the oil filler cap, other seals and an alternator. Bushes for the lower link shaft keep the three-point linkage tight. Gas struts for the bonnet or rear window lose force gradually. Where two struts are fitted, replace both, otherwise the panel twists and the new strut ends up carrying the whole load.

In the cab there are rocker switches, including one for the front work lamps, push button switches and a tractor seat. Work lamps come as square spotlights for flush mounting.

A practical point on the alternator: when the charge warning light comes on, check the belt, the battery terminals and the earth strap between engine and frame first. Only when those are in order and the charging voltage is still low is the alternator itself to blame. Disconnect the battery before fitting a new unit.

Getting the right part first time

Confirm on the type plate that the tractor really is a CVX 1170 and compare the reference number on the old part with the new one. With seals and O-rings the fitting position matters as much as the number, so note where the old part came from before throwing it away.

The CVX series includes further types, each with a page of its own. Useful for contractors and farms running several CVX tractors:

Parts that apply across the brand are collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart