Menu
EUR

Case IH 695 XL tractor parts & technical data

Whether you call it Case IH 695 XL or IHC 695 XL, this page has more than 250 fitting parts. Steering and front axle, lighting and electrics lead the range.

272 parts found for Case IH 695 XL
Show:
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€124,74 €103,09 €114,76 €94,84
You save 8%
Roof lining XL series Case IH Series 95-1455 XL
€1.130,06 €933,93 €1.039,66 €859,22
You save 8%
LED work lights spotlight 48 W, 6300 lm, 160 x 98,5 x 66,6 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€72,37 €59,81 €66,58 €55,03
You save 8%
Stud exhaust 3/8" x 38 mm Case IH
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm. More
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm.
€4,58 €3,78
Sealing ring
€7,10 €5,87
KS Piston set, complete Ø 98,43 mm, combustion chamber Ø 56 mm Case IH
KS
Dimensions: 3 rings, Ø 98.43 mm, Gudgeon pin Ø 36 x 82 mm, Combustion chamber Ø 56 mm, Combustion chamber depth 24 mm, Ring carrier piston. Descrip... More
Dimensions: 3 rings, Ø 98.43 mm, Gudgeon pin Ø 36 x 82 mm, Combustio...
€242,91 €200,75 €223,48 €184,69
You save 8%
Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blade terminal. More
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally cl...
€11,46 €9,47
Gas strut rear window 180 N, 550 mm, stroke 231 mm Case IH
Newtons: 180. A: 550 mm. B: 278 mm. C: 10 mm. D: 10 mm. Stroke: 231 mm. d1: 8 mm. d2: 18 mm. To fit: Rear screen. Form: 6. Menke no.: 54790. More
Newtons: 180. A: 550 mm. B: 278 mm. C: 10 mm. D: 10 mm. Stroke: 231 mm...
€33,89 €28,01 €31,18 €25,77
You save 8%
HELLA Rocker switch hazard lights locks in place, 7 connections 6,3 mm
HELLA
Version: Insert with symbol must be ordered separately. Without location light, with function light, 7 blade terminals 6.3 mm, 2 switch positions: 0: ... More
Version: Insert with symbol must be ordered separately. Without locati...
€32,91 €27,20
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
Start safety switch differential lock M18 x 1,5 Case IH
Version: Differential lock (contact function) Thread: M18 x 1.5 2 blade terminals More
Version: Differential lock (contact function) Thread: M18 x 1.5 2 blad...
€40,09 €33,13 €36,88 €30,48
You save 8%
Sleeve drive shaft 24 teeth Case IH 85-1056, 3210-3230
€200,25 €165,50 €184,23 €152,26
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Weight (g): 195 More
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipm...
€57,45 €47,48 €52,85 €43,68
You save 8%
Danfoss Orbitrol OSPC 100 OR Case IH, SAME, Deutz-Fahr
Danfoss
Type: OSPC 100 OR / 150N1222. More
Type: OSPC 100 OR / 150N1222.
€1.002,07 €828,16 €921,90 €761,90
You save 8%
Ball holder for gas strut rear window Case IH Series 32-4240
€62,12 €51,34 €57,15 €47,23
You save 8%
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: Ø 168 x 116 mm. Mount... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€81,44 €67,31 €78,43 €64,82
You save 4%
HELLA Interior lights K (10W), clear, 12 V, built-in
HELLA
Bulb: K (10W). Colour: Transparent. Installation location: Interior. Nominal voltage: 12 V. Switches: On switch. Type: Halogen. Light function: Interi... More
Bulb: K (10W). Colour: Transparent. Installation location: Interior. N...
€14,68 €12,13
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
SANDEN
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. of grooves: 2 | Reference no.: SD7H15-4478, 86993462, 1999755C2, 19997... More
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP -...
€621,28 €513,45 €571,58 €472,38
You save 8%
LUK Clutch kit with thrust bearing and pilot bearing Case IH 248 - 4240
LUK
Contents: Pressure plate 458131003813, clutch plate 458331015411, release bearing 458500104650, pilot bearing 458410002641 More
Contents: Pressure plate 458131003813, clutch plate 458331015411, rele...
€915,73 €756,80 €842,47 €696,26
You save 8%
LUK Clutch plate 310TDCN 1 1/8 inch, 10 splines, sintered Case IH
LUK
Material specifications: Sintered clutch lining | Dimensions (inches): 1 1/8"" 10 grooves More
Material specifications: Sintered clutch lining | Dimensions (inches):...
€336,34 €277,97 €309,43 €255,73
You save 8%
Elring Cylinder head gasket 1,59 mm Case IH engine D-206, D-239, D-246, D-268
€118,89 €98,26 €109,38 €90,40
You save 8%
Koppelingshulpcilinder Case IH 3210 - 4240, CX 50 - CX 100
€127,06 €105,01 €116,90 €96,61
You save 8%
FEBI Alternator 14 V / 70 A, form A, flange 80,5 mm
FEBI
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguson More
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguso...
€213,83 €176,72 €161,65 €133,60
You save 24%
HELLA Steering column switch straight, 115 mm, indicator, horn, indicator
HELLA
Version: Functions: indicators, horn and headlight flasher, lever 115 mm long, steering column switch. Form: Straight. Length: 115 mm. Switching funct... More
Version: Functions: indicators, horn and headlight flasher, lever 115 ...
€120,58 €99,65 €116,12 €95,97
You save 4%
Internal plate PTO clutch 2,1 mm, inner 93,3 mm, outer 125 mm
Version: thickness = 2,1 mm inner = 93,3 mm outer 125 mm More
Version: thickness = 2,1 mm inner = 93,3 mm outer 125 mm
€34,20 €28,26 €31,46 €26,00
You save 8%
Rotary switch fan, 5 blade terminals Case IH
Version: For blower With 5 blade terminals More
Version: For blower With 5 blade terminals
€39,39 €32,55 €36,24 €29,95
You save 8%
Clutch plate 310 CCE sintered, 23,4 x 28,9 mm, 10 splines Case IH
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€262,94 €217,31 €241,90 €199,92
You save 8%
Thrust bearing 60 x 102 x 20,5 mm Case IH
Dimensions (mm): 60 x 102 x 20.5 More
Dimensions (mm): 60 x 102 x 20.5
€45,69 €37,76 €42,03 €34,74
You save 8%
Alternator 14 V, 70 A, flange 82 mm
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Installation angle (°): l 60 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm... More
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Instal...
€154,77 €127,91 €142,39 €117,68
You save 8%
Elring Gasket set lower Case IH engine D-206, D-239, D-246, D-268
Elring
Additional information: Without cylinder liner gasket set More
Additional information: Without cylinder liner gasket set
€319,07 €263,69 €293,54 €242,60
You save 8%
Crankshaft seal set for Case IH
Menke no.: 63685. More
Menke no.: 63685.
€59,48 €49,16 €54,72 €45,22
You save 8%
Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,85 €12,27
AKS-Dasis Air conditioning compressor 12 V, pulley-Ø 152 mm, 2 grooves Case IH
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | No. of grooves: 2 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: M Inlet: 20.5 ... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | No. of grooves: 2 | No...
€532,24 €439,87 €489,66 €404,68
You save 8%
MAHLE Alternator 14 V, 100 A, flange 82 mm
MAHLE
Nominal voltage (V): 14 | Additional information: Compact alternator, dust-tight | Mounting L / d / R (mm): 82,0 / 8,2 / 86,0 | Charging current (A): ... More
Nominal voltage (V): 14 | Additional information: Compact alternator, ...
€410,36 €339,14 €245,78 €203,13
You save 40%
HELLA Starter motor 12 V, 3 kW, 10 teeth, Ø 89 mm, clockwise
€600,18 €496,02 €462,42 €382,17
You save 23%
PTO shaft end piece 244,5 mm Case IH
Version: Length 244,5 mm. More
Version: Length 244,5 mm.
€231,13 €191,02 €212,64 €175,74
You save 8%
Handle half for deurruitverstelling Case IH Series 32-4240
€34,62 €28,61 €31,85 €26,32
You save 8%
Reflector round red Ø 90 mm, M5, bolted
Material: Plastic | Additional information: External thread (M5) | Hole Ø (mm): M5 | Mounting type: Bolted | Form: Round | Total Ø (mm): 90 | Menke ... More
Material: Plastic | Additional information: External thread (M5) | Hol...
€7,98 €6,59
Internal plate Hi-Lo PTO shaft 2 mm, 98 - 125 mm Case IH
Version: thickness = 2 mm inner = 98 mm outer = 125 mm More
Version: thickness = 2 mm inner = 98 mm outer = 125 mm
€33,72 €27,87 €31,02 €25,64
You save 8%
LUK Clutch kit without release bearing Case IH 248 - 4240
LUK
Supplementary set: Without release bearing | Contents: Pressure plate 458131003811, clutch plate 458331015411 More
Supplementary set: Without release bearing | Contents: Pressure plate ...
€752,77 €622,12 €692,55 €572,35
You save 8%
LUK Thrust bearing 2,375 x 4 x 0,8 inch Case IH, McCormick
LUK
Dimensions (inches): 2.375"" x 4"" x 0.8"" More
Dimensions (inches): 2.375"" x 4"" x 0.8""
€104,21 €86,12 €95,87 €79,23
You save 8%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 89 mm, l 135
€610,79 €504,79 €548,74 €453,50
You save 10%
Axial joint 180 mm, M20 x 1,5 / M18 x 1,5, 32 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€43,18 €35,69 €39,73 €32,83
You save 8%
Axial joint 180 mm, M20 x 1,5, M18 x 1,5, 32°
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€76,07 €62,87 €69,98 €57,84
You save 8%
Track rod 500 mm, 7/8" x 16, taper 15,4 - 17,9 mm, 9/16" x 18
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. F: 20,75 mm. More
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. ...
€126,19 €104,29 €116,09 €95,95
You save 8%
Showing 1 - 48 of 272

Case IH 695 XL parts for engine rebuilds and upkeep

The Case IH 695 XL, which many farmers still call the IHC 695 XL, often gets a second life through an engine rebuild. This page lists more than 250 replacement parts for this tractor, from manufacturers including GRANIT, HELLA, ZF, KS and Carraro.

Rebuilding the engine

For an overhaul there are complete piston sets and piston ring sets, backed up by gaskets and O-rings, for instance for the feed pump and the thermostat. The brass bushes that hold the injector nozzle holders are here too.

A word on those bushes: they separate the coolant from the combustion chamber. If you see bubbles in the radiator or coolant disappears without a visible leak, a failed bush may be the cause. Replace them whenever you rebuild, since the head is already on the bench. With new piston rings, check the ring gap by pushing each ring squarely into the bore and measuring before it goes onto the piston.

Cooling, steering and driveline

Around the cooling system there are radiator hoses, such as the by-pass hose, and thermostat gaskets. The by-pass hose is often awkward to reach and tends to get forgotten. Replace it along with the thermostat, since everything is already open. For the front axle and steering there are axial joints and ball joints, which announce wear through play at the steering wheel. In the driveline you will find clutch packs with internal and external plates.

Cab and electrics

Gas struts hold the cab door open, and one that no longer holds is more than a nuisance on a windy day. For the lights there are work lamps, rocker switches and flasher units. If the indicators suddenly flash twice as fast, a bulb has usually blown. If they stop flashing altogether, suspect the flasher unit first.

  • piston sets and piston ring sets
  • nozzle holder bushes, gaskets and O-rings
  • radiator hoses and sealing rings
  • axial joints and ball joints
  • work lamps, rocker switches and flasher units

From type plate to engine number

The type plate on your 695 XL confirms the model, but for an engine rebuild the number on the block matters just as much. Pistons and rings are matched to the bore, so measure the cylinders before you order. For individual parts, the reference number on the old component is a good guide.

The same series also includes the Case IH 695 and the Case IH 895 XL. Each has its own page, so pick the one matching the model on your type plate. Other Case IH and IHC tractors are under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart