Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXM 130 tractor parts & technical data

Servicing a Case IH MXM 130? This page holds more than 250 parts for the model, from trailer couplings and electrics to brake and transmission components.

248 parts found for Case IH MXM 130
Show:
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€29,04 €24,00
PROBOSS Seat air suspended AS4550 550 mm, 12 V, heating
PROBOSS
Restraint system: Optional | To fit: Case, Steyr, New Holland | Height (mm): 270 → 370 | Seat heater: Yes | Seat contact switch: Yes | Seat width (m... More
Restraint system: Optional | To fit: Case, Steyr, New Holland | Height...
€2.481,08 €2.050,48 €2.427,65 €2.006,32
You save 2%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 92 mm
€527,52 €435,97 €406,44 €335,90
You save 23%
AKS-Dasis Thermostat airco Case IH, Fiat, Ford, New Holland
AKS-Dasis
Version: Air conditioning system More
Version: Air conditioning system
€142,98 €118,17 €131,54 €108,71
You save 8%
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
Scharmüller Drawbar K50 Scharmüller S32, rail 255 mm, pin Ø 25 mm, 31 kN
Scharmüller
Rail width: 255 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 167 mm. Plate height: 120 mm. Hole: M10... More
Rail width: 255 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€893,95 €738,80 €822,43 €679,70
You save 8%
Scharmüller Automatic hitch rail width 330 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,2 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.229,18 €1.015,85 €1.090,39 €901,15
You save 11%
GRAMMER Tractor seat Maximo Evolution Dynamic air suspended, 550 mm
GRAMMER
Restraint system: Yes | On-board voltage (V): 12 | Seat heater: Yes | Suspension: Air suspension | Side horizontal suspension: Yes | Track gauge (mm):... More
Restraint system: Yes | On-board voltage (V): 12 | Seat heater: Yes | ...
€7.058,13 €5.833,17 €6.543,48 €5.407,83
You save 7%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
GRAMMER
Side horizontal suspension: Yes | Upholstery type: Fabric / new design | Armrest: Yes | Included in delivery: Seat supplied with seat contact switch a... More
Side horizontal suspension: Yes | Upholstery type: Fabric / new design...
€5.359,89 €4.429,66 €4.981,10 €4.116,61
You save 7%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€936,88 €774,28 €740,70 €612,15
You save 21%
Hydraulic top link cat. 3, 640 - 900 mm, cylinder-Ø 90 mm
Top link type: hydraulic. Type: Clevis joint/ball joint. A cat.: 3 / 32. B cat.: 28. F: 640 / 900 mm. Stroke: 260 mm. Piston rod Ø D: 45 mm. Cylinder... More
Top link type: hydraulic. Type: Clevis joint/ball joint. A cat.: 3 / 3...
€688,45 €568,97 €633,37 €523,45
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: Ø 168 x 116 mm. Mount... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€81,44 €67,31 €78,43 €64,82
You save 4%
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.092,43 €902,83 €1.005,04 €830,61
You save 8%
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€754,30 €623,39 €693,96 €573,52
You save 8%
FEBI Secondary air filter CF1140/2
€45,56 €37,65 €17,32 €14,31
You save 62%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.363,65 €1.126,98 €1.100,67 €909,64
You save 19%
Hand brake switch mechanical contact switch with plug connection
Version: Contact switch, Connection cable with plug connection. More
Version: Contact switch, Connection cable with plug connection.
€61,91 €51,17 €56,96 €47,07
You save 8%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€651,63 €538,54 €627,60 €518,67
You save 4%
Scharmüller Adapter plate 255 mm rail, guide 32 mm, hole pattern 140 x 80 mm
Scharmüller
Colour: Verkehrs Grau | Detent pin Ø (mm): 25 | Pin Ø (mm): 16 | Guide width (mm): 32 | Hole pattern (mm): 140 x 80 | Rail width (mm): 255 | Plate h... More
Colour: Verkehrs Grau | Detent pin Ø (mm): 25 | Pin Ø (mm): 16 | Gui...
€556,82 €460,18 €512,27 €423,37
You save 8%
Scharmüller Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Scharmüller
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Dc-value (kN): 106 | D-value (... More
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole...
€600,57 €496,34 €552,52 €456,63
You save 8%
Eaton Planetary gear transmission, 994 g
Eaton
Reference no.: 5145497 More
Reference no.: 5145497
€85,99 €71,07 €79,11 €65,38
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 8 grooves, 200 ccm oil
SANDEN
Suitable oil: SP 10 | Pulley Ø (mm): 119 | Refrigerant: R 134a | Nominal voltage (V): 12 | Fixing: EM | Oil quantity (ccm): 200 | No. of grooves: 8 More
Suitable oil: SP 10 | Pulley Ø (mm): 119 | Refrigerant: R 134a | Nomi...
€748,87 €618,90 €688,96 €569,39
You save 8%
LUK Thrust bearing 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
LUK
Dimensions (mm): 65 x 115 x 30 More
Dimensions (mm): 65 x 115 x 30
€409,98 €338,83 €377,18 €311,72
You save 8%
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
PROBOSS
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adjustment - Longitudinal adjustment - Backrest tilt adjustment - Mechani... More
- Air suspension with 12V compressor - Fore/aft isolator - Continuous ...
€1.818,19 €1.502,64 €1.792,40 €1.481,32
You save 1%
HELLA Alternator 14 V, 120 A, pulley Ø 67 mm, 8 grooves
HELLA
Charging current (A): 120 | Nominal voltage (V): 14 | Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 67 | Nominal values (V / A):... More
Charging current (A): 120 | Nominal voltage (V): 14 | Additional infor...
€505,61 €417,86 €389,56 €321,95
You save 23%
Walterscheid Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.852,29 €1.530,82 €1.464,43 €1.210,28
You save 21%
Bosch/Rexroth Hydraulic pump 22,5 cm³/rpm. anticlockwise Case IH, Fiat, New Holland
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 22,5 More
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction o...
€536,54 €443,42 €493,62 €407,95
You save 8%
Double gear transmission Case IH, Fiat, New Holland
€447,45 €369,79 €411,65 €340,21
You save 8%
Pick-up hooks 320 mm, Ø 25 mm, 70 x 59 mm Case IH, New Holland
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25 More
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25
€218,56 €180,63 €201,08 €166,18
You save 8%
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
CARLISLE
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth More
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€32,93 €27,21
LUK Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
LUK
Contents: Pressure plate 458133021410, clutch plate 458333007211 | Supplementary set: Without release bearing More
Contents: Pressure plate 458133021410, clutch plate 458333007211 | Sup...
€657,87 €543,69 €605,24 €500,20
You save 8%
Thrust bearing single 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
Dimensions (mm): 65 x 115 x 30 More
Dimensions (mm): 65 x 115 x 30
€126,14 €104,25 €116,05 €95,91
You save 8%
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case IH, Steyr, New Holland
GRAMMER
Length (mm): 648 | - Storage pocket - APS: automatic positioning system - Left armrest, 80 x 380 mm, tilt adjustable - Swivel adaptor 7.5° left/15° ... More
Length (mm): 648 | - Storage pocket - APS: automatic positioning syste...
€5.221,00 €4.314,88 €4.853,32 €4.011,01
You save 7%
FEBI Electric cooling fan Case IH, New Holland
FEBI
To fit as: New Holland TM 120, 130, 140, 155, 175, 190 More
To fit as: New Holland TM 120, 130, 140, 155, 175, 190
€820,56 €678,15 €435,06 €359,55
You save 47%
MAHLE Gear reduction starter 12 V, 3,0 kW, 10 teeth, clockwise, Ø 92 mm
€560,37 €463,12 €335,62 €277,38
You save 40%
Outer plate hand brake Case IH, New Holland, Steyr
€126,19 €104,29 €116,09 €95,95
You save 8%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.167,94 €965,24 €923,38 €763,13
You save 21%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.285,58 €1.062,46 €990,51 €818,61
You save 23%
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€877,53 €725,23 €807,33 €667,21
You save 8%
MAHLE Airco compressor 12 V, R 134a, pulley Ø 119 mm, 8 grooves
MAHLE
Suitable oil: PAG 46 | For compressor: SD7H15 | No. of grooves: 8 | Additional information: With V-ribbed belt pulley, with sealing ring | Connection:... More
Suitable oil: PAG 46 | For compressor: SD7H15 | No. of grooves: 8 | Ad...
€507,16 €419,14 €455,64 €376,56
You save 10%
Scharmüller Drawbar frame 82,4 kN, rail width 330 mm, nose weight 3000 kg
Scharmüller
Detent pin Ø (mm): 25 | Lock: Ball 80 manual | Category: Bearing supports | Guide width (mm): 32 | Load capacity (kg): 3000 | Colour: AGCO grey | D-v... More
Detent pin Ø (mm): 25 | Lock: Ball 80 manual | Category: Bearing supp...
€2.239,36 €1.850,71 €2.110,21 €1.743,98
You save 6%
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
CARLISLE
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm More
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€35,28 €29,16 €32,46 €26,82
You save 8%
Showing 1 - 48 of 248

Case IH MXM 130 parts, front to back

More than 250 parts fit the MXM 130, from GRANIT, Scharmüller, GRAMMER, ROCKINGER and HELLA. Here they are in the order a mechanic would walk round the tractor, from the rear forwards and then into the cab.

Rear: drawbar and hitch

At the back you will find drawbars, a top drawbar, Piton Fix hitches and height adjustable adaptor plates. A Piton Fix sits fixed in the rail and is meant for drawbars with an eye that drops over the pin. For each of these, check the rail width and the thickness of the locking pin on the tractor before choosing. After fitting, push the locking pin fully home and secure it with its clip.

Middle: engine, steering and tank

Under the bonnet there are gaskets, including one for the exhaust manifold, seal kits, a starter motor, a torsion damper and a viscous fan clutch. The fan clutch is easy to judge yourself. With the engine stopped and cold, spin the fan by hand. If it freewheels with no resistance, or there is oil around the hub, it is due for replacement. A clutch that no longer grips lets the engine run hot under heavy load.

For the steering there are ball joints and a front axle steering angle sensor with cable and plug. Have the toe-in reset after replacing a ball joint, or the front tyres will wear unevenly. A vented tank cap is also available.

Inside: seating and visibility

In the cab you will find tractor seats, such as an air suspended GRAMMER Maximo and a PROBOSS seat with heating, plus gas struts for the rear window. A rear window that drops shut on its own is a nuisance and can hurt if your head happens to be out of it.

The torsion damper sits between engine and transmission and soaks up the engine's power pulses. If you hear a rattle from the clutch housing at idle that disappears as soon as you open the throttle a little, the damper is the obvious suspect. If the starter has been turning slowly lately, this is a good moment to deal with that too.

Choosing the right parts

The type plate on the MXM 130 gives the model and chassis number, which you need for parts that come in several versions, such as the ball joints. If the old part carries a reference number, take it along when you compare.

If you also run another tractor from the MXM series, its parts are on its own page:

The rest of the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart