Menu
EUR

Case IH 740 tractor parts & technical data

Case IH 740 or IHC 740, the name on the bonnet makes no difference here: more than 250 items for this tractor, including trailer couplings and oldtimer parts.

299 parts found for Case IH 740
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€124,74 €103,09 €114,76 €94,84
You save 8%
Steering valve dw without float position 210 bar, 40 l/min, system SB1
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 124... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€250,23 €206,80 €230,21 €190,26
You save 8%
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.137,00 €939,67 €1.026,33 €848,21
You save 10%
Indicator-width bulb LED 12 / 24 V, 84 x 84 x 51 mm, cable 4000 mm
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light function: Indicator, position light | Nominal voltage (V): 12 / 24 | Additional ... More
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light ...
€54,98 €45,44 €50,58 €41,80
You save 8%
Ball joint taper 16,2 - 18,3 mm, 101 mm, M14 x 1,5, M20 x 1,5
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread (mm): M20 x 1.5. More
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread...
€39,32 €32,50 €36,17 €29,90
You save 8%
Scharmüller Drawbar K50 Scharmüller S32, rail 330 mm, pin Ø 25 mm, 31 kN
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 167 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.043,39 €862,31 €959,92 €793,32
You save 8%
FEBI Air filter C13114/4
€37,09 €30,65 €16,38 €13,54
You save 56%
Blue Print Air filter C13114/4
€37,09 €30,65 €16,38 €13,54
You save 56%
Stud exhaust 3/8" x 38 mm Case IH
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm. More
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm.
€4,58 €3,78
Sealing ring
€7,10 €5,87
Scharmüller Automatic hitch rail width 330 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,2 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.229,18 €1.015,85 €1.090,39 €901,15
You save 11%
FEBI Ball joint taper 16,2 - 18,3 mm, 101 mm, M14 x 1,5, M20 x 1,5
FEBI
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread (mm): M20 x 1.5. More
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread...
€31,22 €25,80 €16,53 €13,66
You save 47%
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€20,09 €16,60
Scharmüller Drawbar frame 295/25/26, 34 kN, 2000 kg IHC, Case IH
Scharmüller
To fit as: Case IH Serie A-Familie 433-933, A-Familie 440-940; More
To fit as: Case IH Serie A-Familie 433-933, A-Familie 440-940;
€868,74 €717,97 €849,24 €701,85
You save 2%
Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blade terminal. More
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally cl...
€11,46 €9,47
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €168,86 €139,55
You save 8%
FEBI Mirror black unheated 185 x 130 mm, rod Ø 10, 12, 13 mm
FEBI
Tractor type: all types with cover, half-cab and cab. More
Tractor type: all types with cover, half-cab and cab.
€46,83 €38,70 €38,14 €31,52
You save 19%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.092,43 €902,83 €1.005,04 €830,61
You save 8%
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€30,45 €25,17
Steering valve ew/dw without float position 220 bar, 40 l/min, system SB1
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 170... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€467,96 €386,74 €430,52 €355,80
You save 8%
HELLA Indicator/position light 12 V, R21W/C5W, yellow/white - 2 pieces
HELLA
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horizontal, yellow indicator light, white position light, with 2 holes for M4 fixing ... More
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horiz...
€47,11 €38,94
LED work lights round Ø 120 mm floodlight 6800 lm, 60 W
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Voltage range (V): 10 - 30 | Power (watts): 60 | Protection class: IP6K9K / IP67 | W... More
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Volt...
€85,72 €70,84 €78,86 €65,18
You save 8%
Steering valve ew blocked 220 bar, 30 l/min, system SB1
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 30 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 110... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€269,42 €222,66 €247,87 €204,85
You save 8%
HELLA Rocker switch hazard lights locks in place, 7 connections 6,3 mm
HELLA
Version: Insert with symbol must be ordered separately. Without location light, with function light, 7 blade terminals 6.3 mm, 2 switch positions: 0: ... More
Version: Insert with symbol must be ordered separately. Without locati...
€32,91 €27,20
HELLA Steering column switch straight, 115 mm, indicator, horn, indicator
HELLA
Version: Functions: indicators, horn and headlight flasher, lever 115 mm long, steering column switch. Form: Straight. Length: 115 mm. Switching funct... More
Version: Functions: indicators, horn and headlight flasher, lever 115 ...
€120,58 €99,65 €116,12 €95,97
You save 4%
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€754,30 €623,39 €693,96 €573,52
You save 8%
Replacement key Case IH - 2 pieces
Version: To fit as: Case IH More
Version: To fit as: Case IH
€34,91 €28,85 €32,12 €26,54
You save 8%
Elring Cylinder head gasket 1,59 mm Case IH engine D-206, D-239, D-246, D-268
€118,89 €98,26 €109,38 €90,40
You save 8%
Scharmüller Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M20
Scharmüller
Load capacity: 2000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 160 x 100 mm. Guide width: 32 mm. Plate height: 120 mm. Thread: M20. Colou... More
Load capacity: 2000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€600,57 €496,34 €552,52 €456,63
You save 8%
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: Ø 168 x 116 mm. Mount... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€81,44 €67,31 €78,43 €64,82
You save 4%
Clutch kit flywheel 40 mm deep IHC, Case IH 433-933
To fit as: Case IH 533, 633, 733, 833, 933, 640, 740, 840, 940 More
To fit as: Case IH 533, 633, 733, 833, 933, 640, 740, 840, 940
€1.048,33 €866,39 €964,46 €797,08
You save 8%
Walterscheid Clutch coupling pin 31 mm, width 60 mm, nose weight 1250 kg
Walterscheid
Locking pin Ø (mm): 26 | Colour: Black | Connecting pin (mm): 31 | Lock: Manual, cylindrical hitch bolt | Hole spacing (mm): 72 | Drawbar eye: DIN 11... More
Locking pin Ø (mm): 26 | Colour: Black | Connecting pin (mm): 31 | Lo...
€1.472,23 €1.216,72 €1.163,96 €961,95
You save 21%
SACHS Clutch plate 290, 22 x 25 mm, 13 splines sintered Case IH 433 - 940
SACHS
Dimensions (mm): 22 x 25 13 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22 x 25 13 grooves | Material specifications: Sintere...
€469,45 €387,98 €431,89 €356,94
You save 8%
Scharmüller Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Scharmüller
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Dc-value (kN): 106 | D-value (... More
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole...
€600,57 €496,34 €552,52 €456,63
You save 8%
Rotary switch fan, 5 blade terminals Case IH
Version: For blower With 5 blade terminals More
Version: For blower With 5 blade terminals
€39,39 €32,55 €36,24 €29,95
You save 8%
Elring Gasket set lower Case IH engine D-206, D-239, D-246, D-268
Elring
Additional information: Without cylinder liner gasket set More
Additional information: Without cylinder liner gasket set
€319,07 €263,69 €293,54 €242,60
You save 8%
Crankshaft seal set for Case IH
Menke no.: 63685. More
Menke no.: 63685.
€59,48 €49,16 €54,72 €45,22
You save 8%
Hydraulic pump short 8 cm³/rpm., taper 1:5, Ø 17 x 17 mm
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. More
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17.
€163,62 €135,22 €150,53 €124,41
You save 8%
Breather filter hydraulic venting Ø 60 mm Case IH
D1: 60 mm. D2: 60 mm. H1: 49,5 mm. D3: 52,5 mm. Hifi no.: SA12498. More
D1: 60 mm. D2: 60 mm. H1: 49,5 mm. D3: 52,5 mm. Hifi no.: SA12498.
€36,81 €30,42 €33,87 €27,99
You save 8%
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.324,09 €1.094,29
Tank cap with ventilation, tank collar Ø 65 mm Case IH, IHC, International
To fit as: Case IH 433, 533, 633, 733, 833, 933, 440, 540, 640, 740, 840, 940, 743, 744, 745S, 844, 844S, 946, 1046, 1246, 955, 1055, 1255, 1455, 743X... More
To fit as: Case IH 433, 533, 633, 733, 833, 933, 440, 540, 640, 740, 8...
€23,36 €19,31
Bolt set 2de steering valve 2x M8 x 150, 1x M8 x 100, 2x M8
Technical data: consisting of:, 2 x M8 x 150, 1 x M8 x 100, 2 x M8, for 2nd Control unit. More
Technical data: consisting of:, 2 x M8 x 150, 1 x M8 x 100, 2 x M8, fo...
€30,96 €25,59
LED rear light 12/24 V, 96 x 80 x 25.5 mm Case IH, John Deere
Depth (mm): 25.5 | Form: Rectangular | Additional information: Power consumption: Indicator: 20 W Rear light: 0.5 W Brake light: 4 W | Cable length (m... More
Depth (mm): 25.5 | Form: Rectangular | Additional information: Power c...
€85,24 €70,45 €78,42 €64,81
You save 8%
SACHS Double clutch DuT 228/290 41 x 45 mm, 25 splines sintered Case IH
SACHS
Material specifications: Sintered clutch lining | Dimensions (mm): 41 x 45 25 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 41 ...
€1.313,14 €1.085,24 €1.208,09 €998,42
You save 8%
LUK Double clutch 228/290TGU 41 x 45 mm, 25 splines Case IH 433 - 940
LUK
Flywheel dimension (mm): 40 (tief) | Dimensions (mm): 41 x 45 25 grooves More
Flywheel dimension (mm): 40 (tief) | Dimensions (mm): 41 x 45 25 groov...
€937,99 €775,20 €862,95 €713,18
You save 8%
Showing 1 - 48 of 299

Case IH 740 parts, also listed as IHC 740

Plenty of these tractors still wear an IHC 740 badge, and the type plate may well say the same. The more than 250 parts on this page fit the Case IH 740 whichever name is on the bonnet. They are new parts from GRANIT, HELLA, Scharmüller, LUK and FEBI.

Steering, clutch and driveline

The steering side covers ball joints and steering valves. A steering valve that leaks internally lets the wheel creep back and makes loader work heavy going. When fitting a new valve, flush the lines and refill with fresh oil so dirt from the old oil does not go straight into the new unit. Further back you will find clutch plates, double clutch pressure plates and universal joints for the drive shafts.

Grease universal joints until fresh grease appears at all four bearing seals. If one side stays dry, the passage is blocked and that needle bearing is running without lubrication, which is the usual reason a joint fails early.

Engine sealing and cooling

For the engine there are gaskets, O-rings for the feed pump, sealing rings and a crankshaft seal set. Cooling is covered by radiator hoses and a thermostat gasket. Replace a hose that feels soft or crunchy when you squeeze it, even if it is not leaking yet, and fit new clamps at the same time because old ones are often stretched. At the thermostat housing, scrape off every trace of the old gasket with a flat scraper, or the new one will weep as well.

Switches, lights and towing

Rocker switches and indicator lenses, partly from HELLA, cover the electrics. Gas struts for the windscreen frame make the screen stay open again, and drawbars from Scharmüller and GRANIT handle the towing side. A rocker switch that only works now and then usually has burnt contacts, so replace it before it lets you down at the wrong moment.

Checking the fit and related models

Read the type plate first and note whether it says Case IH or IHC 740. For steering valves and clutch plates, which look very similar, the reference number on the part you removed is the safest check. Write it down before you clean the part, because stamped figures soon vanish under rust and paint. Compare it with the numbers shown with the item before you order.

Related models from the same family have their own pages with the parts that fit them:

To browse the whole brand, go to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart