Menu
EUR

Case IH JX 100U tractor parts & technical data

The Case IH JX 100U from the JXU series has more than 200 matching parts here, many of them trailer couplings, lighting or parts for brakes and transmission.

223 parts found for Case IH JX 100U
Show:
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.616,17 €1.335,68 €1.271,24 €1.050,61
You save 21%
FEBI Engine oil filter Ø 107,67 mm, height 129,92 mm, thread 3/4"-16 UNF
€59,44 €49,12 €10,98 €9,07
You save 82%
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€32,69 €27,02 €30,07 €24,86
You save 8%
Exhaust pipe on the cab pillar New Holland TL, Case IH JXU
Version: On the cab pillar. More
Version: On the cab pillar.
€237,82 €196,55 €218,79 €180,82
You save 8%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
Cobo Work light rectangular H3 12/24 V, 158 x 96 mm, right
Cobo
Nominal voltage (V): 12 / 24 | Bulb: H3 | Height (mm): 96 | Installation location: Right | Color: Black | Fixing: Jointed bracket | Form: Rectangular ... More
Nominal voltage (V): 12 / 24 | Bulb: H3 | Height (mm): 96 | Installati...
€83,93 €69,36 €77,22 €63,81
You save 8%
Eaton Driven gear wheel transmission
Eaton
Reference no.: 5169606 More
Reference no.: 5169606
€136,74 €113,01 €125,80 €103,97
You save 8%
Eaton Drive pinion transmission 2,65 kg
Eaton
Reference no.: 5172047 More
Reference no.: 5172047
€418,94 €346,23 €385,42 €318,53
You save 8%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Cobo Work light rectangular H3, steel bracket Case IH, New Holland
Cobo
Material: Polyamide | Bulb: H3 | Color: Black | Fixing: Steel bracket | Form: Rectangular More
Material: Polyamide | Bulb: H3 | Color: Black | Fixing: Steel bracket ...
€77,64 €64,17 €71,43 €59,03
You save 8%
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.157,46 €956,58 €1.064,86 €880,05
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Weight (g): 195 More
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipm...
€57,45 €47,48 €52,85 €43,68
You save 8%
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€33,70 €27,85
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.022,73 €845,23 €940,91 €777,61
You save 8%
Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€25,23 €20,85
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.422,99 €1.176,02 €1.297,49 €1.072,31
You save 9%
HELLA Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
HELLA
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14 | Additional information: With pulley | Pulley Ø (mm): 93 | Nominal values (V ... More
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14...
€305,58 €252,55 €235,44 €194,58
You save 23%
Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional information: Unheated | Installation location: Right/left | To fit: Case... More
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Add...
€503,82 €416,38 €463,51 €383,07
You save 8%
AKS-Dasis Condenser without dryer Case IH, Fiat, Ford, New Holland
AKS-Dasis
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer More
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer
€580,51 €479,76 €534,07 €441,38
You save 8%
Expansion valve 3/8 - 5/8 inch o-ring
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€48,74 €40,28 €44,84 €37,06
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
MAHLE
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: V/TO | Suitable oil: PAG 46 | Pulley Ø (mm): 132 More
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Co...
€513,19 €424,12 €461,06 €381,04
You save 10%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€58,64 €48,46 €53,95 €44,59
You save 8%
SANDEN Air conditioning compressor 12 V, pulley Ø 119 mm, 2 grooves, 200 ccm oil
SANDEN
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable oil: SP 10 | Oil quantity (ccm): 200 | Refrigerant: R 134a More
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fi...
€732,23 €605,15 €673,65 €556,74
You save 8%
Pilot bearing 17 x 47 x 14 mm
Dimensions (mm): 17 x 47 x 14 More
Dimensions (mm): 17 x 47 x 14
€6,59 €5,44
Steering cylinder Case IH, Fiat, Ford, New Holland
Reference no.: 5189893 More
Reference no.: 5189893
€400,19 €330,74 €368,17 €304,28
You save 8%
Eaton Drive pinion transmission 1,37 kg
Eaton
Reference no.: 5179673 More
Reference no.: 5179673
€228,28 €188,66 €210,02 €173,57
You save 8%
Eaton Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125013 More
Reference no.: 5125013
€326,26 €269,64 €300,16 €248,07
You save 8%
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€639,84 €528,79 €383,22 €316,71
You save 40%
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 80,4 kN. Colour: Black. More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€716,17 €591,88 €658,88 €544,53
You save 8%
Bosch/Rexroth Hydraulic pump 22,5 cm³/rpm. anticlockwise Case IH, Fiat, New Holland
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 22,5 More
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction o...
€536,54 €443,42 €493,62 €407,95
You save 8%
LUK Torsion damper Ø 262 mm, 35x40, 14 teeth Case IH
LUK
Diameter (mm): 262 | Tooth profile: 35x40 | Number of teeth: 14 More
Diameter (mm): 262 | Tooth profile: 35x40 | Number of teeth: 14
€498,50 €411,98 €458,62 €379,02
You save 8%
Alternator 12 V / 45 A, pulley Ø 90 mm, W-connection
Nominal voltage (V): 12 | Charging current (A): 45 | Pulley spacing (mm): 58,0 | Additional information: With W connection | Belt tension hole Ø / R ... More
Nominal voltage (V): 12 | Charging current (A): 45 | Pulley spacing (m...
€203,36 €168,07 €187,09 €154,62
You save 8%
Eaton Link wheel Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125007 More
Reference no.: 5125007
€300,25 €248,14 €276,23 €228,29
You save 8%
Eaton Main shaft transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5161817 More
Reference no.: 5161817
€433,08 €357,92 €398,43 €329,28
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
€657,02 €542,99 €506,23 €418,37
You save 23%
Track rod 2WD 1090 - 1180 mm, taper 18 - 20 mm
A: 1090 - 1180 mm. B: M24 x 1,5 mm. C: 18 - 20 mm. G: . D: M24 x 1,5 mm. E: 32 mm. F: 24,4 mm. More
A: 1090 - 1180 mm. B: M24 x 1,5 mm. C: 18 - 20 mm. G: . D: M24 x 1,5 m...
€254,26 €210,13 €233,92 €193,32
You save 8%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.285,58 €1.062,46 €990,51 €818,61
You save 23%
LUK Double clutch 310/310TGU6 40 x 45 mm, 16 splines sintered chain pitch 33 mm
LUK
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specific...
€1.193,19 €986,11 €1.147,73 €948,54
You save 4%
Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 40 x 45 16 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€764,21 €631,58 €753,07 €622,37
You save 1%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø (mm): 132 | Reference no.: QP7H15-7849 | Suitable oil: PAG 46 | Fixi... More
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 ...
€485,74 €401,44 €446,88 €369,32
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 125 mm, 2 grooves
SANDEN
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity (ccm): 185 | Nominal voltage (V): 12 | Pulley Ø (mm): 125 | No. of grooves: 2 More
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity ...
€710,18 €586,93 €653,37 €539,97
You save 8%
LUK Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
LUK
Supplementary set: Without release bearing | Contents: Pressure plate 458131024910, clutch plate 458331021910 More
Supplementary set: Without release bearing | Contents: Pressure plate ...
€680,09 €562,06 €625,68 €517,09
You save 8%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
You save 8%
Showing 1 - 48 of 223

Case IH JX 100U parts

Clutch slipping under load, a whine as soon as you press the pedal, an air conditioning system that no longer cools the cab. These are the jobs that bring most owners of a JX 100U to the workshop, and the parts for them are on this page. In total there are more than 200 parts that fit the Case IH JX 100U, supplied by GRANIT, Eaton, LUK, MAHLE and ROCKINGER.

Parts by area

  • Clutch: single clutch pressure plates, clutch plates and thrust bearings
  • Engine: thermostat gaskets, piston sealing rings, cylinder head gaskets and gear wheels
  • Air conditioning and charging: aircon compressor, the matching V-belt and alternators
  • Body and cab: rear lights, gas struts for the rear window, tank caps and seats
  • Hitching: drawbars

Doing the clutch once and properly

Splitting a tractor is the expensive part of a clutch job, so replace the pressure plate, clutch plate and thrust bearing together while it is apart. Look at the flywheel face too. Scoring or blue heat marks mean it needs skimming, or the new plate will glaze and wear quickly. The clutch plate usually has the flywheel side marked on the hub, so check that before you line it up.

An aircon compressor swap has its own rule. The system must be evacuated and recharged afterwards, and the receiver drier should be replaced at the same time, because it absorbs moisture as soon as the circuit is opened.

The tank cap is easy to overlook. If its vent is blocked, a vacuum builds in the tank during long, heavy work and the engine starts to lose power. When the tractor only pulls properly again after you have briefly loosened the cap, a new one is the simplest fix. While the thermostat housing is open for a new gasket, take a look at the thermostat itself. An engine that stays cold for a long time or runs hot is a good reason to renew both at once.

Confirming the fit

The JX 100U belongs to the JXU series from Case IH. Tractors in this range look much alike from the outside, so check the type plate before you order. If you still have the old part, look for a reference number on the housing or the rim. For gaskets and clutch plates that is often the quickest way to the right item.

Other tractors in this series have their own pages, handy if your yard has more than one of them:

The JX 80U and JXU 115 are part of the same family as well. For every other model the brand makes, start from the Case IH parts overview and choose your type there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart